Current status

Number of commits found XX: 39

Retire QT2. QT3 was released a few years ago and QT4 will be released soon.

Start the QT2 deorbit by marking all ports that depend non-optional
on qt23 DEPRECATED

Suggested by:   eik

Chase the new location of libXft.

Add NO_LATEST_LINK

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

No member of the kde@ team has touched anything related to Qt2 in ages, so
stop pretending to maintain these ports.

Define USE_PERL5_BUILD, not erroneous USE_PERL.

Submitted by:   Oliver Eikemeier

Define USE_PERL to make Perl available for (mostly deprecated)
"perl -pi -e" construction.

Make WRKSRC overridable by slave-ports.

Declare (or resolve) conflicts for KDE and QT.

Remove pkg-comment from remaining master/slave port sets.

Approved by:    portmgr (implicitly)

Remove the renaming of Xft headers and library from the Xft (Xft2) port.
Remove installing of Xft1 from XFree86-4-libraries, and add dependencies
to the Xft port by all the ports that use it along with whatever patches are
necessary.

Approved by:    portmgr (kris), marcus

Protect targets with .if target(...) ... .endif for targets that are
redefined in slave ports.  Slave port maintainers need to check that
they aren't actually relying on the master port target to be executed.

Exorcise the ghost of objprelink, which was killed and buried with kde2.
This should unbreak some things, like some errors from portsdb -Uu, as well
as the port build itself.

Remove USE_NEWGCC, which is no longer supported or required.

Submitted by:   Tilman Linneweh <tilman@arved.de>
PR:             ports/40571

Block installation if Qt3 is already installed to prevent people from
clobbering the installations.

Submitted by:   lioux

Assign PORTREVISION using `?=' instead of `=' so that slave ports can
override it.

PR:             ports/34779
Submitted by:   SASAKI Katuhiro <sahiro@crest.ocn.ne.jp>
                (MAINTAINER of ja-{qt23,kde*2} ports)

Replace `cd dir && cmd' with `cd dir ; cmd' while I'm here.

Use correct -soname for qtgl shared library, so that libqtgl actually works.
Previously libqtgl.so.4 was libked with soname of libqt2.so.4, so that
when you link application with -lqtgl you are fine, but when you are trying
to run resulting application it dies because libqt2 (which has no GL code)
is dynamically linked instead.

Not objected by:        will

fix Makefile, thanks to roam@    

Fix OSVERSION, bad me. Pointed out by will.    

Add NO_QT_OBJPRELINK=yes, let -CURRENT installs smoothly.    

Remove -frerun-cse-after-loop, a vestige from the days when our compiler   was
slightly broken [1].    

Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;   the ECHO
macro is set to "echo" by default, but it is set to "true" if   make(1) is
invoked with the -s option while ECHO_CMD is always set to   the echo command.  
 

Apply objprelink patch and use it only if MACHINE_ARCH=i386 *and*  
NO_QT_OBJPRELINK isn't defined.  This was a little trickier than   fixing the
KDE stuff, but I think this will work ok.    

Enable to build this ports when you set MAKE_ENV on your shell environment.    

Preemptive note to keep people from asking me questions about AA support.    

Upgrade KDE to 2.2.2:    * General:           - Support for objprelink.         
 - Hack for autoconf 2.13/automake 1.4.  Note that we can't use             the
standard USE_AUTO* because they change things in work/*;             KDE has its
own way of doing that.           - Light cleanup of extra dirs in the PLISTs
provided by              my mkplistpkg[1] script.           - Speedups of both
compile and runtime through the usage of             --disable-debug and
--enable-final.  The latter did not work             with the kdemultimedia
package, unfortunately.           - Patch updates.    * audio/kdemultimedia2:   
       - Patch to fix KSCD on FreeBSD[2].  It works very well now.    *
deskutils/kdepim:           - Enable kpilot[3].  Pull in the latest pilot-link
stuff.    * devel/kdesdk,    * devel/kdevelop:           - No specific changes. 
  * devel/qt-designer:           - Make this port depend almost entirely on qt23
to make it more             maintainable, so I don't have to keep hacking the
patches to             get them to apply.    * editors/koffice,    *
games/kdegames,    * graphics/kdegraphics:           - No specific changes.    *
misc/kdeaddons:           - SDL is required now.  Cull SDL PLIST_SUB and such.  
        - Fix breakage from hardcoding "sdl-config".    * misc/kdeutils2:       
   - Fix problem with klaptopdaemon[4] where it didn't properly            
display the battery time.  This patch is untested, but applied.    *
net/kdenetwork2:           - Fix DCC for KSIRC[5].           - Remove ktalkd
from the build.  It requires some weird thing             in the configure
script that I don't have time to look at.    * sysutils/kdeadmin:           - No
specific changes.    * textproc/kdoc:           - Remove bogus requirement that
kdoc requires Perl 5.6.0; it sure             seems to operate fine with >=
5.005.  But I'll let time tell.    * www/quanta:           - No specific changes
(--disable-debug support only).    * x11/kde2:           - No specific changes. 
  * x11/kdebase2:           - Fix ksysguard compile by merging the files from
the HEAD branch             of KDE CVS that were missing at release time for
FreeBSD[6].  :\    * x11/kdelibs2:           - Recognize CUPS' spinoff[7].      
    - Add libxslt dependency since it was removed from kdelibs.           - Fix
libxml compile problems[8] (accomplished by upgrading).           - Remove
libkformula from port Makefile; this library has been             spun off into
koffice.           - Fix mode problems with DCOP[9].  This allows you to save
files             properly.  It also seems to be a FreeBSD specific problem.    
      - Fix bashisms in kdeprint/imagetops script[10].    * x11-clocks/kdetoys2:
          - No specific changes.    * x11-toolkits/qt23:           - Do NOT
upgrade to QT 2.3.2[11].           - Allow devel/qt-designer to depend on this
port entirely for the             patches by adding a perlre to accomplish this.
   * x11-wm/kdeartwork:           - No specific changes.    

Bump png major    

Set DIST_SUBDIR=KDE    

Make MAINTAINER overridable for japanese/qt23. (I forgot to commit   this along
with other kde* ports)    

Reassign MAINTAINER to kde@FreeBSD.org, a group formed specifically to  
maintain and improve QT/KDE on FreeBSD.  This group (at this time)   consists
of:  demon, olgeni, kevlo, lauri@kde.org, rwatson, and will.    

Remove -xft since it doesn't work with older X11.  Now will people stop  
bothering me about putting that in, 'cause I'm not doing it again!  Even   if
you do a patch that checks XFREE86_VERSION!    

Add one more MASTER_SITE.    

Update to 2.3.1.    

Support building QT with debugging turned, keyed off the QT_DEBUG variable.    

-pthread --> ${PTHREAD_LIBS}   -D_THREAD_SAFE --> ${PTHREAD_CFLAGS}    

Fix last-minute change to avoid broken packaging for qt2-static.    

Bring in my fixes for KDE2 for users of XFree86 4.0.x.  Basically, what   this
involves is this:  Cull GL from Qt by default, but still provide a   Qt+GL
library that may or may not have threads.  Then also provide a Qt   library that
has threads but not GL.  This allows us to make KDE2 depend   on a library that
will *not* have threads, ever.  Threads will be   revisited at a later date. 
Ports that require GL support need to be   updated to use the hacked library,
libqtgl.so.4.  The net result is that   we bloat our qt2 package by 1.5-2.5MB
for compatability.  Also, static   qt will not have GL support.    

Ladies and gentlemen, I give you QT 2.3.0!    

Number of commits found XX: 39

10 vulnerabilities affecting 79 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-03-05 21:21:29