18:12 Adriaan de Groot (adridg) 

x11-toolkits/qt5-gui: minimal plugin independent of option X11

The "minimal" plugin is always needed (or just **one** of
the plugins, but this will do) to allow QtGui applications
to function. Turning off X11 turned them all off (I supposed
"if you're not using X11, you must install the Wayland bits
instead" would work, but that's hard to express in ports).

So remove the plist-sub from the minimal plugin -- there is
enough X11 pulled in regardless of the X11 option, that
the plugin builds (and links against X11 libraries, so
the option is a lie).

The linked PR is not for this port, but demonstrates a problem:
if X11 is turned off, there is no platform plugins at all,
and then there is no way to run Qt-Gui applications (even with
minimal / no graphics). For "command-line" Qt-Gui applications
like qhelpgenerator, that is a problem.

PR:		267949

    934e8c6

17:18 tcberner 

x11-toolkits/qt5-gui: add X11 option

This change makes it possible to build Qt5 without a big dependency on X11,
which you might want to do when only requiring Qt for wkhtmltopdf or similar
"headless" setups.

- Some additional port formatting

PR:		247994
Submitted by:	Ralf van der Enden <tremere@cainites.net>
Reported by:	Markus Mann <freebsd-public@it64.de>

 

06:43 tcberner 

Update Qt5 to 5.15

This is a major upgrade of the Qt libraries [1], [2].

* People that use upgrading mechanisms with incomplete dependency handling
  (portmaster & Co) should make sure to manually remove the existing Qt
  packages to guarantee a safe upgrade. Keep in mind, that Qt does not like if
  you have an incomplete upgrade.

* This version of Qt drops support for OpenSSL 1.0 -- this means that there
  won't be any binary packages for Qt5 provided by the FreeBSD package builders
  for FreeBSD 11.x anymore -- and the same for *all* the ports depending on
  net/qt5-network [3]. If you cannot upgrade to a more recent FreeBSD
  version (12.x, 13.x), you will need to build Qt5 from ports while switching
  to an SSL implementation from ports.

Big thanks are due for
* kai@ for updating webengine (also mikael@)
* Felix Palmen for providing LibreSSL support patches
* adridg@ and lbartoletti@ for helping me fix the fallout

[1] https://www.qt.io/blog/qt-5.15-released
[2] https://wiki.qt.io/New_Features_in_Qt_5.15
[3] https://www.freshports.org/net/qt5-network

PR:		247010
Exp-run by:	antoine

 

12:35 tcberner 

Update Qt5 to 5.14.2

Very big thanks go again to kai@ who provided the www/qt5-webengine upgrade (to
5.14.0).
Notably, video capture support was re-enabled.

Announcement:
        https://www.qt.io/blog/qt-5.14-has-released

PR:		244964
Exp-run by:	antoine

 

14:03 adridg 

Add vulkan dependency to x11-toolkits/qt5-gui

If the Vulkan headers are installed, builds would fail with extra
artifacts produced. Since those headers are small, header-only, and
only drag in cmake which is probably needed by dependencies anyway,
push Vulkan forward.

PR:		242017
Submitted by:	jbeich

 

16:59 tcberner 

Update Qt5 to 5.13.2

Announcement:
        https://www.qt.io/blog/qt-5.13.2-released

Thanks to kai@ for updating webengine.

PR:		241649
Exp-run by:	antoine

 

04:13 tcberner 

Qt5 update to 5.13.0

For new features, check: https://wiki.qt.io/New_Features_in_Qt_5.13

Thanks to adridg who helped to fix a lot of packages.

Exp-run by:	antoine
PR:		238782

 

20:50 tcberner 

Update Qt5 to 5.12.2

- Thanks to kai for updating webengine.

Exp-run by:	antoine
PR:		236895

 

17:43 tcberner 

Update Qt5 to 5.12.1

Release announcement:
  https://blog.qt.io/blog/2019/02/01/qt-5-12-1-released/
Changelog:
  https://wiki.qt.io/Qt_5.12.1_Change_Files

- A change was required to qt-dist.mk to always pass LOCALBASE to qmake,
  as Qt5 has been installed to a prefix for some time now, there should
  not be any harm in that, with respect to it picking up installed versions
  of itself during build.

PR:		235622
Exp-run by:	antoine

 

14:49 tcberner 

Update Qt5 to 5.12.0

http://blog.qt.io/blog/2018/12/06/qt-5-12-lts-released/

- This breaks support for libressl again. Patches are welcome.

PR:		233705
Exp-run by:	antoine

 

11:12 tcberner 

Update Qt5 to 5.11.1

Big thanks to
        * brnrd for the libressl patches in net/qt5-network
        * jhale for fixing the bulk load of ports

PR:		230884
Exp-run by:	antoine

 

12:27 rakuco 

Update the Qt5 ports to 5.10.1.

The work was done by tcberner and myself, with thanks to antoine for the
exp-run.

Not a lot to report compared to other Qt5 updates:
* net/qt5-network is still broken with LibreSSL. I said this in a commit
  message ages ago but it bears repeating: upstream is open to adding support
  for LibreSSL, but someone needs to step up to maintain it upstream, otherwise
  things will continue to be broken all the time.
* www/qt5-webengine is a huge monster that is terrible to update, just like
  www/chromium itself is. We (kde@) have decided to keep using the 5.9 series
  for the time being, as it should be compatible with the rest of Qt anyway. It
  was updated to 5.9.5, the latest 5.9 release at the time of writing.

PR:		228213

 

21:30 rakuco 

Update Qt5 ports to 5.9.3.

This took quite a lot of time because Qt's own build system underwent
several changes in 5.8.0 that took a while to adapt to.

And, of course, qt5-webengine is a behemoth that we need to patch like crazy
due to its bundling of Chromium. In fact, most of the Chromium patches in
qt5-webengine have been imported with no changes from www/chromium@433510
("www/chromium: update to 56.0.2924.87").

New port: accessibility/qt5-speech

Bigger changes to Qt5 ports we had to make:
- Qt now allows using a configure.json file to define configuration options
  and specify configuration checks that can be done when qmake is invoked.
  However, configure.json checks done in a subdirectory only propagates to
  subdirectories, and checks elsewhere will fail if all .pro files are being
  parsed at once (i.e. qmake -recursive), so several ports had to switch to
  USES=qmake:norecursive along with manual additional qmake invocations in
  subdirectories in order to work. It's been mentioned in a few places such
  as Qt's bug tracker that qmake's recursive mode is pretty much deprecated,
  so we might switch to non-recursive mode by default in the future.

- Uses/qmake.mk: Introduce QMAKE_CONFIGURE_ARGS. qmake now accepts
  arbitrary options such as '-foo' and '-no-bar' at the end of the
  command-line. They can be specified in QMAKE_CONFIGURE_ARGS.

- graphics/qt5-wayland: The port can only be built if graphics/mesa-libs is
  built with the WAYLAND option, so a corresponding option (off by default)
  was added to the port.

- misc/qt5-doc: Switch to a pre-built documentation tarball. The existing
  port was not working with Qt 5.9. Instead of trying to fix it, switch to
  what Gentoo does and fetch a tarball that already contains all
  documentation so that we do not have to build anything at all. The
  tarball's name and location in download.qt.io look a bit weird, but it
  seems to work fine.

- www/qt5-webengine: Use binutils from ports, Chromium's GN build system
  generates a build.ninja that uses ar(1) with the @file syntax that is not
  supported by BSD ar, so we need to use GNU ar from binutils.

- x11-toolkits/qt5-declarative-render2d: This port was merged into the main
  Qt Declarative repository upstream, and into x11-toolkits/qt5-quick in the
  ports tree.

Changes to other ports we had to make:
- biology/ugene: Drop a '#define point "."' that is not present in more
  recent versions of the port. Defining a macro with such a common name
  causes build issues with Qt 5.9, which uses |point| as an argument name in
  methods.

- cad/qelectrotech: Fix plist with Qt 5.9. Directories are no longer
  installed with `cp -f -R', but rather `qmake install qinstall', which does
  not install

   
%%DATADIR%%/elements/10_electric/20_manufacturers_articles/bosch_rexroth/.directory

  That's a local file that should not even have been part of the tarball
  anyway.

- chinese/gcin-qt5: Add additional private Qt directories (which should not
  be used in the first place) to get the port to build with Qt 5.9.

- devel/qtcreator: Fix plist with Qt 5.9. Something changed in qdoc and some
  test classes no longer generate documentation files.

- security/keepassx-devel: Import a patch sent upstream almost a year ago to
  fix the build with Qt 5.9.

Thanks to antoine for the exp-run, and tcberner and Laurent Cimon
<laurent@nuxi.ca> for landing changes in our qt-5.9 branch.

PR:		224849

 

19:48 tcberner 

Update Qt5 to 5.7.1, and unify the Qt4 and Qt5 ports some more

* Update Qt5 to 5.7.1
* Move Qt4 binaries to lib/qt4/bin
* Move Qt5 libraries to lib/qt5/lib
  By moving the libraries we should finally be able to get rid of the inplace
  upgrade bug (see ports bugs 194088, 195105 and 198720):  when Qt5's libraries
  were lying in /usr/local/lib, which would often get added by pkgconfig to the
  linker paths via dependencies, the already installed libraries were linked
  against, instead of the ones that were being built. This forced us to make
  sure, that -L${WRKSRC}/lib was always coming before -L/usr/local/lib in the
  linker flags. With this change this should no longer be the case.
* Rename some ports to match the rest (foo-qtX -> qtX-foo)
* Depend on new port misc/qtchooser [see UPDATING & CHANGES]

There are several new Qt5 ports which all have been created by Marie Loise
Nolden
<nolden@kde.org>. Thanks again.

PR:		216797
Exp-Run by:	antoine
Reviewed by:	rakuco, mat, groot_kde.org
Approved by:	rakuco (mentor)
Differential Revision:	https://reviews.freebsd.org/D9213

 

09:46 rakuco 

Update the Qt5 ports to 5.6.1.

This took longer than expected, but there are quite a few changes to the
existing ports and a few new ones.

General upstream changes:
- Starting with Qt 5.6.2, Qt will fail at configuration time if LibreSSL is
  being used. According to the discussion here:
  https://codereview.qt-project.org/#/c/154800/
  The Qt project is not opposed to LibreSSL, but does not want to mix
  support for it into the OpenSSL backend code, especially as they move
  towards supporting OpenSSL 1.1.
  People interested in LibreSSL support are welcome to submit a separate
  backend upstream, but are expected to maintain it. We (kde@) are not
  opposed to carrying some patches authored by others in the future, as long
  as they are not huge and destabilizing.
- When Qt detects the compiler supports C++11, it will pass -std=gnu++11 by
  default (this is an upstream change). You can add "CONFIG -= c++11" to
  your .pro. Qt 5.7 will require C++11.
- www/webkit-qt5: The QtWebKit module is deprecated upstream, and is shipped
  separately as a community release tarball. kde@ does not have an ETA for a
  qt5-webengine port, as it requires a huge effort (and number of patches)
  similar to maintaining www/chromium itself.
- x11-toolkits/qt5-declarative has been deprecated upstream. The last
  release is 5.5.1.

Relevant changes:
- devel/qmake5: The freebsd-clang mkspec has become the default mkspec on
  FreeBSD, replacing the outdated freebsd-g++ one that was moved to
  unsupported/ (it still works though).
- devel/qt5-qdoc: qdoc was moved to qttools upstream, but its data files are
  still in qtbase. The data files are now in the qt5-qdoc-data port.
- misc/qt5-doc: Clean up and stop requiring a compiler and fumbling with
  mkspecs. Instead of running the `configure' script, which requires a
  compiler and adjustments to the mkspecs files and also ends up building a
  new qmake binary, we now leverage USES=qmake to generate all the Makefiles
  from the top-level qt.pro. Getting this to work requires some tricks,
  though, and qt.conf.in has a longer explanation of what's being done.
  Switch to USES=gmake to be able to drop MAKE_JOBS_UNSAFE=yes.

New ports:
- comms/qt5-serialbus
- devel/qt5-qdoc-data
- x11-toolkits/qt5-quickcontrols2

Big thanks to Adriaan de Groot (groot@kde.org), tcberner@ and Loise Nolden
(nolden@kde.org) for the huge amount of work they put into this
patch. Loise in particular also sent quite a few changes upstream that were
essential for this update to work.

PR:		211916

 

17:24 pi 

x11-toolkits/qt5-gui: platform and themes updates

PR:		209326
Submitted by:	rakuco, T.C.Berner <tcberner@gmail.com>, Ralf Nolden
<nolden@kde.org

 

18:10 rakuco 

Update Qt5 to 5.5.1.

This is the latest stable release at time of writing.

Release announcement: http://blog.qt.io/blog/2015/07/01/qt-5-5-released/
New features in Qt 5.5: https://wiki.qt.io/New_Features_in_Qt_5.5

As usual, huge thanks to Tobias Berner (tcberner@gmail.com) for all his work
on these ports in kde@'s experimental area51 repository. He's the one who
started the update and did a lot of the initial work on Qt 5.5. Ralf Nolden
(nolden@kde.org) has contributed the initial version of most of our new Qt5
ports.

Also thanks to Yuri Victorovich (yuri@rawbw.com) for contributing PR 205805
with his own patch for the 5.5.1 update. Some of his changes there prompted
additional fixes and changes present in the final patch generated from our
experimental repository.

New ports:
- comms/qt5-connectivity, comms/qt5-sensors, devel/qt5-location,
  graphics/qt5-3d, net/qt5-enginio, x11-toolkits/qt5-canvas3d,
  x11-toolkits/qt5-uiplugin.

General changes in all Qt5 ports:
- All Qt5 ports are now built with -Wl,--as-needed to avoid overlinking,
  which is a problem with qmake-based because the libraries passed to the
  linker come from the modules .pri files and many are not necessary.
- With this change, several ports had their USE_QT5 lines adjusted to
  explicitly include some libraries that were pulled in implicitly, and to
  exclude libraries no longer required with -Wl,--as-needed.

Changes in specific ports:
- devel/qt5: Drop the SQL_PLUGINS and TOOLS options and depend on all Qt5
  ports by default. It makes the Makefile much simpler, and those options
  were already on by default.
- devel/qt5-core: The clang+base libstdc++ workaround has been expanded and
  more C++11 features have been disabled when that combination is used by a
  port (basically, FreeBSD 9 with USES=compiler:c++11-lang). The disabled
  features have explanations for why they were disabled in the patched
  header itself.
- devel/qt5-designer: uiplugins has been split out following a similar
  change upstream. By depending on qt5-uiplugin, qt5-uitools avoids having
  to depend on the big qt5-designer port.
- multimedia/qt5-multimedia: The port now uses GStreamer 1.0 instead of
  0.10.
- net/qt5-network: The port now depends on libproxy for proxy settings.
  Using libproxy allows proxy settings to be read from different sources,
  and also allows .pac files to work with Qt.
- www/qt5-webkit: The port now uses GStreamer 1.0 instead of 0.10.

PR:		205805
PR:		206435

 

09:37 rakuco 

Update Qt5 to 5.4.1.

This is probably the first time our Qt 5 ports are tracking the latest
upstream release :-)

There isn't much to report in this update, thanks to the effort spent in the
5.2->5.3 update: a lot of the work is just small plist and patch updates.
Thankfully, several patches have been upstreamed and are not needed on our
side anymore.

I would like to thank Alex Richardson <arichardson.kde@gmail.com> and Tobias
Berner <tcberner@gmail.com> for their help with the plist updates and
general testing.

PR:		198585

 

09:39 rakuco 

Update Qt5 ports to 5.3.2.

Proudly presented by the KDE on FreeBSD team, with several guest stars.

This update took way longer than initially expected due to us previously
accumulating assumptions and changes to Qt's build system that finally bit
us back with the 5.3 release series, so we had to do a fair amount of
cleanup.

New ports:
- comms/qt5-serialport: Qt functions to access serial ports, originally
                        based on work by Fernando Apesteguia. [1]
- devel/qt5-qdoc: Qt documentation generator, the Qt5 equivalent of
                  devel/qt4-qdoc3. Originally worked on by Tobias Berner.
                  It had already been half-split from devel/qt5-buildtools,
                  we just needed to finish the work.

Dead ports:
- devel/qt5-qmldevtools: Merged into lang/qt5-qml.

Minor changes:
- devel/qt5: Add x11/qt5-x11extras and the new ports to the dependency list.
- graphics/qt5-imageformats: The port now supports the JPEG2000, WEBP,
                             Direct Draw Surface and ICNS formats.
- multimedia/qt5-multimedia: The ALSA and PULSEAUDIO options are now
                             mutually exclusive due to changes introduced in
                             Qt 5.3.0 (the ALSA code is now a proper plugin
                             that is only built if PulseAudio is not used).
- x11/qt5-x11extras: Add USE_LDCONFIG since the port installs a shared
                     library.

The big changes:
- bsd.qt.mk: Set QMAKESPEC instead of QMAKEPATH. [3]
  QMAKEPATH does much more than we want now that we call qmake from the top
  of ${WRKSRC}. qmake uses QMAKEPATH when evaluating the QMAKE_MKSPECS
  property, which is in turn used by qt_config.pri to load the .pri files in
  mkspecs/modules.

  In practice, this means that if people have an older Qt installation those
  files will be used and QT_CONFIG will have values such as "gui" even if
  one is building a port like textproc/qt5-xml, which passes -no-gui to the
  configure script. Consequently, unintended code paths may be enabled or
  the configuration step can just fail if the .pro files expect values that
  are not present in the system-wide, older .pri files.

  We avoid all those problems if we use QMAKESPEC, as qmake does not take
  its value into account when evaluating the QMAKE_MKSPECS property and will
  only parse the files in the mkspec's directory (mkspecs/freebsd-clang, for
  example, instead of all the files in mkspecs).

- Stop explicitly passing ${LOCALBASE} to the compiler. [3]
  qmake's behavior has changed in Qt 5, and the paths set in QMAKE_INCDIR
  and QMAKE_LIBDIR in the mkspecs are passed before any others, such as the
  ones in the build directory themselves.

  In practice, this means that we end up with linker calls like this:

  c++ -o libfoo.so foo.o bar.o -L/usr/local/lib -L/wrkdir/build/lib
      -lQt5Gui -lQt5Core

  So if one already has Qt installed in the system, the older, already
  present version of the libraries in /usr/local/lib will be used instead of
  the newly-built ones in /wrkdir/build/lib.

  QTBUG-40825 discusses this behavior upstream, but there has been no
  agreement on a solution yet.

  For now, the solution adopted is to make the compiler and the linker aware
  of those paths but only try them last after all others, and this is
  achieved by setting the CPATH and LIBRARY_PATH environment variables when
  qmake is being used.

  In addition to setting them in CONFIGURE_ENV and MAKE_ENV, we also need to
  stop changing QMAKE_INCDIR and QMAKE_LIBDIR as well as filter those paths
  from the pkg-config calls qtbase's configure script makes.

- Call qmake from the root of the ${WRKSRC}.

  In Qt 5.3, Qt's build infrastructure has undergone some changes that make
  our previous approach of calling qmake from the directories we want to
  build stop working. Things would break even more in Qt 5.4, in which
  qtbase's configure script does not accept the -process, -fully-process and
  -dont-process arguments anymore (it always behaves as if -process had been
  used).

  Bite the bullet and start calling qmake from ${WRKSRC}. The largest part of
  this change involves changing lines in Makefiles from
    WRKSRC_SUBDIR=	foo/bar
  to
    BUILD_WRKSRC=		${WRKSRC}/foo/bar
    INSTALL_WRKSRC=		${WRKSRC}/foo/bar
  as well as adding patches to .pro files to avoid entering other
  subdirectories and removing post-configure targets that are not necessary
  anymore.

  Since qmake needs to be called from the top of ${WRKSRC} anyway, we can
  also simplify the configuration process for the qtbase ports a little.
  Looking at r10019 it is not clear why we started calling qmake in the
  pre-configure target in addition to the post-configure one (while also
  skipping it in do-configure), but we can now drop this call since letting
  configure behave as if -process had been passed means it will call qmake
  on its own and overwrite the files generated by the pre-configure call. We
  still need to call qmake in post-configure though, as the configure script
  does not pass -recursive when calling qmake and we need to be able to call
  make from any subdirectory when building.

PR:		194762 [1]
PR:		194566 # exp-run with base GCC and clang
PR:		194088 [3]

 

21:35 rakuco 

Remove @dirrm and @dirrmtry entries from the Qt ports.

 

11:09 tijl 

Remove libtool .la files from all Qt ports

Approvedy by:	kde (makc)

 

16:50 makc 

KDE/FreeBSD team is happy to present Qt 5 in ports!

Alberto Villa (avilla@) has done all the hard work to create Qt 5 ports.
Trivial update from 5.2.0-beta1 to 5.2.1 by me.

Special thanks for Adriaan de Groot <groot@kde.org> for his assistance for
Qt-5.2.0 update.

Approved by:	portmgr (bapt) (for Mk/bsd.port.mk)