| non port: x11-toolkits/vdk/Makefile |
|
SVNWeb
|
Number of commits found: 62 |
|
Mon, 30 Jan 2023
|
[ 13:59 Baptiste Daroussin (bapt)  ]    e121333
x11-toolkits/vdk: remove
Depends on EOLed GTk+2.0 and not depended on in the ports tree
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] 71b6a9f (Only the first 10 of 134 ports in this commit are shown above. )
x11-toolkits: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* 1wardd@airmail.net
* Alexander Kabaev <ak03@gte.com>
* Alexander Novitsky <alecn2002@yandex.ru>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Andreas Kohn <andreas@syndrom23.de>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anton Berezin <tobez@FreeBSD.org>
* Brian Buchanan <brian@CSUA.Berkeley.EDU>
* Cezary Morga <cm@therek.net>
* Cheng-Lung Sung <clsung@FreeBSD.org>
* Danilo Egea Gondolfo <danilo@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 10 Jan 2021
|
[ 17:52 kevans ]  
x11-toolkits/vdk: fix build on -CURRENT
libgnuregex has been removed in FreeBSD 13.0. The version in base had a
number of known or likely bugs associated with it, so just use the newer
and more stable port on all supported FreeBSD versions.
PR: 252259
MFH: 2021Q1
|
|
Fri, 8 Nov 2019
|
[ 11:21 tobik ] (Only the first 10 of 139 ports in this commit are shown above. )
x11*: Add missing USES={gl,gnome,mate}
|
|
Thu, 8 Dec 2016
|
[ 19:52 tijl ] (Only the first 10 of 551 ports in this commit are shown above. )
Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
|
Tue, 24 Mar 2015
|
[ 19:37 marino ] (Only the first 10 of 19 ports in this commit are shown above. )
3 ports categories: Remove $PTHREAD_LIBS
Categories: editors, x11, x11-toolkits
approved by: PTHREAD blanket
|
|
Mon, 25 Aug 2014
|
[ 17:30 amdmi3 ]
- Drop .la files, no dependees require them
Approved by: portmgr blanket
|
|
Wed, 23 Apr 2014
|
[ 13:25 tijl ] (Only the first 10 of 462 ports in this commit are shown above. )
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 22 Apr 2014
|
[ 09:15 bapt ]
Support stage
Uses libtool
|
|
Fri, 20 Sep 2013
|
[ 23:57 bapt ] (Only the first 10 of 288 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)
|
|
Mon, 2 Sep 2013
|
[ 21:04 bapt ] (Only the first 10 of 30 ports in this commit are shown above. )
Add an explicit dependency on pkgconf
|
|
Thu, 28 Mar 2013
|
[ 03:28 eadler ] (Only the first 10 of 149 ports in this commit are shown above. )
Mechanically convert unmaintained ports which use "gnomehack" to use "pathfix"
instead.
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Tue, 12 Apr 2011
|
[ 02:42 miwi ]
- Update to 2.5.1
PR: 155852
Submitted by: Ports Fury
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Tue, 22 Dec 2009
|
[ 11:25 miwi ] (Only the first 10 of 14 ports in this commit are shown above. )
- Update to 2.4.2
PR: 141821
Submitted by: Ports Fury
|
|
Sat, 22 Aug 2009
|
[ 00:39 amdmi3 ] (Only the first 10 of 148 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with X
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Mon, 5 Jan 2009
|
[ 20:34 wxs ]
- Remove conditional checks for FreeBSD 5.x and older
Approved by: pav
|
|
Fri, 6 Jun 2008
|
[ 14:16 edwin ] (Only the first 10 of 158 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Tue, 25 Mar 2008
|
[ 22:44 miwi ] (Only the first 10 of 211 ports in this commit are shown above. )
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION
Approved by: portmgr (xorg cleanup)
|
|
Mon, 4 Jun 2007
|
[ 19:55 miwi ]
- Fix Build with gcc 4.2
PR: 113305
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Thu, 1 Feb 2007
|
[ 02:42 kris ] (Only the first 10 of 348 ports in this commit are shown above. )
Use libtool port instead of included version to avoid objformat a.out botch
|
|
Tue, 15 Aug 2006
|
[ 01:13 clsung ] (Only the first 10 of 44 ports in this commit are shown above. )
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- x11-toolkits/ of ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
|
|
Sat, 13 May 2006
|
[ 05:00 edwin ] (Only the first 10 of 191 ports in this commit are shown above. )
Remove USE_REINPLACE from categories starting with X
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Sat, 5 Nov 2005
|
[ 05:22 marcus ] (Only the first 10 of 1045 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared library update.
|
|
Sun, 5 Jun 2005
|
[ 16:20 sem ]
- Fix on 4.x
|
[ 13:34 sem ]
- Update to 2.4.1
PR: ports/81864
Submitted by: Ports Fury
|
|
Fri, 3 Jun 2005
|
[ 20:18 oliver ] (Only the first 10 of 67 ports in this commit are shown above. )
change the libtool version to use from 1.3 to 1.5
|
|
Sat, 12 Mar 2005
|
[ 10:54 marcus ] (Only the first 10 of 911 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared lib version change.
|
|
Sun, 7 Nov 2004
|
[ 22:37 marcus ] (Only the first 10 of 631 ports in this commit are shown above. )
Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.
|
|
Fri, 24 Sep 2004
|
[ 01:04 ijliao ]
- Fix build on -current after gcc 3.3 import
PR: 71875, 71886
Submitted by: Ports Fury
Approved by: portmgr (marcus)
|
|
Sat, 10 Jul 2004
|
[ 06:41 krion ]
Update to version 2.4.0
PR: ports/68865
Submitted by: Ports Fury
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Mon, 5 Apr 2004
|
[ 03:31 marcus ] (Only the first 10 of 575 ports in this commit are shown above. )
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Wed, 4 Feb 2004
|
[ 05:10 marcus ] (Only the first 10 of 1422 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
|
|
Wed, 19 Nov 2003
|
[ 16:12 krion ]
- Update to version 2.0.3
PR: 59470
Submitted by: Ports Fury
|
|
Mon, 3 Nov 2003
|
[ 01:19 kris ] (Only the first 10 of 84 ports in this commit are shown above. )
Reset maintainer on ports owned by the following committers who have
been inactive for over 12 months and did not respond to my email confirming
their status: keith, nakai, torstenb
Reviewed by: portmgr
|
|
Sun, 18 May 2003
|
[ 11:35 kris ]
BROKEN on 5.1: configure fails
|
|
Sun, 20 Apr 2003
|
[ 19:54 marcus ] (Only the first 10 of 78 ports in this commit are shown above. )
Remove USE_GNOMENG.
|
|
Fri, 7 Mar 2003
|
[ 06:14 ade ] (Only the first 10 of 142 ports in this commit are shown above. )
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
|
|
Mon, 9 Sep 2002
|
[ 01:18 marcus ]
Fix things after GNOMENG commit.
PR: 42569
Submitted by: Tilman Linneweh <tilman@arved.de>
|
|
Mon, 2 Sep 2002
|
[ 03:58 lioux ] (Only the first 10 of 44 ports in this commit are shown above. )
Deploy USE_GNOMENG infrastructure
PR: 42309
Submitted by: Edwin Groothuis <edwin@mavetju.org>
|
|
Sat, 31 Aug 2002
|
[ 02:44 kris ] (Only the first 10 of 43 ports in this commit are shown above. )
Remove USE_NEWGCC, which is no longer supported or required.
Submitted by: Tilman Linneweh <tilman@arved.de>
PR: ports/40571
|
|
Wed, 23 May 2001
|
[ 07:57 ijliao ]
upgrade to 1.2.5
|
|
Thu, 5 Oct 2000
|
[ 08:22 reg ] (Only the first 10 of 84 ports in this commit are shown above. )
Implement WANT_GNOME.
|
|
Mon, 25 Sep 2000
|
[ 09:51 nakai ]
Update to 1.2.3
|
|
Sun, 16 Jul 2000
|
[ 13:34 nakai ]
Update to 1.2.2
|
|
Thu, 29 Jun 2000
|
[ 09:27 nakai ]
Update to 1.2.1
|
|
Fri, 16 Jun 2000
|
[ 22:52 asami ] (Only the first 10 of 264 ports in this commit are shown above. )
Rename INSTALLS_SHLIBS to INSTALLS_SHLIB. (There was a typo in the previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
|
[ 09:19 sobomax ] (Only the first 10 of 100 ports in this commit are shown above. )
Fix MASSIVE typo INSTALL_SHLIBS --> INSTALLS_SHLIBS, which occured because I
just cun'n'pasted the name from Satoshi's commit message without checking it.
|
|
Thu, 15 Jun 2000
|
[ 17:44 sobomax ] (Only the first 10 of 61 ports in this commit are shown above. )
First round of INSTALL_SHLIB fixes.
|
Number of commits found: 62 |
As an Amazon Associate I earn from qualifying purchases.