Number of commits found: 52

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Update to 1.1.10.

PR:		204201
Submitted by:	tkato432 yahoo com
Sponsored by:	Absolight

- Switch to options helpers

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

Use COPYTREE_SHARE

Simplify example installation

Convert to USES=jpeg

- Add LICENSE_FILE
- Strip library

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

- Update devel/libtool and devel/libltdl to version 2.4.2.418
- Patch libtool so it uses the same library version specification as on
  Darwin, Linux and other systems.  Given the version current:revision:age
  a library will be given the extension .so.major.age.revision with major
  equal to current-age.  Before libtool would use .so.current on FreeBSD.
- Patch libtoolize to remove two cases of umask 0 that caused libltdl
  files to be copied world writable (--ltdl option)
- Let USES=libtool patch this new version correctly
- Adjust all ports with USES=libtool:build and bump PORTREVISION on their
  dependent ports if a library version changed

PR:		194068
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Replace some dependencies on libtool with USES=libtool:build or a
dependency on libtoolize

Convert a bunch of EXTRACT_SUFX=... into USES=tar:...

Approved by:	portmgr (not really, but touches unstaged ports)

Add DOCS option to the remaining staged ports where PORTDOCS appears
in the plist.

Replace USE_AUTOTOOLS=libtool:env with BUILD_DEPENDS on devel/libtool.

Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr

- Update to version 1.1.9

PR:		187968
Submitted by:	Ports Fury

- Update to 1.1.8
- Stage support
- Add License

PR:		187297
Submitted by:	ports fury

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

Convert from USE_MOTIF to USES=motif
While here:
- Trim headers
- Convert USE_GMAKE to USES=gmake
- Remove indefinite article from comment

- update png to 1.5.10

Bump PORTREVISION after open-mofit update

Sync to new bsd.autotools.mk

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- update to jpeg7
Tested by:      pav on pointyhat

Forgot to save in vim for remove CC.

- Add CC and CXX to MAKE_ENV for all ports

PR:             ports/86106, ports/101120 (based on)

- use PORTDOCS, PORTEXAMPLES, etc. as it should
- bump PORTREVISION

Submitted by:   my QA Tindy run

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- x11-toolkits/ of ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Change MASTER_SITES to MASTER_SITES_NETBSD [1]
Now we install .la libs [2]
Fix plist. [3]

PR:             ports/97141 [3]
Submitted by:   Martin Wilke <freebsd@unixfreunde.de> [3]
                lawrance [1], itetcu [2]
Approved by:    lawrance (mentor)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Style: ports@freebsd.org -> ports@FreeBSD.org

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

o) Drop maintainership cause I didn't use these ports since months anymore.

Sync with new bsd.autotools.mk

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

De-pkg-comment.

Bump png major    

o) Fix problem setting GNU_CONFIGURE when USE_LIBTOOL us used.      The build is
aborted due to the missing configure script.    

o Fix compiling problem due to implicit set of GNU_CONFIGURE when using    
USE_LIBTOOL.    

Replace explicit build dependency on libtool with USE_LIBTOOL knob    

Massive style enforcement - use ^I instead of spaces for variables identation.  
 

- Cleanup of Makefile   - Properly support of CC/CFLAGS/PREFIX added   - Remove
version number from dirnames (share/doc/XmHTML, share/examples/XmHTML)   -
Exclude (archtecture dependent) binary program from share/examples/XmHTML   -
Respect NOPORTDOCS   - Increase PORTREVISON to 1   PR: 23832   Submitted by:
tkato@prontomail.ne.jp    

Update to version 1.1.7, needed be grace-5.1.2. Alas the imake build of the  
source tree is toally broken: It's necessary to use the Makefiles and do the  
install by "hand" with manually callinmg libtool, etc.   PR: ports/20464,
ports/20577, ports/21836    

Change motif to a normal dependency.  REQUIRES_MOTIF is now called   USE_MOTIF
and generates a LIB_DEPENDS to x11-toolkits/open-motif.  As   before, it implies
USE_XPM (and therefore USE_XLIB).  Motif-dummy is   removed from
PKG_IGNORE_DEPENDS, whose sole resident is now XFree86-3.    

Bump png shared library version.    

Number of commits found: 52

8 vulnerabilities affecting 48 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2019-05-18 02:24:37