Number of commits found: 72

Update ImageMagick to 6.9.10.14 [1]

* Add PKGNAMESUFFIX and rename the directory. This was done to show
  that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.

Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.

Chase these changes in all the ports that using IM6.

PR:		225102 (based on, only the version update) [1]
Submitted by:	Pascal Christen <pascal.christen@hostpoint.ch>

Add option to disable esound applet

PR:		230709
Submitted by:	tobik

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

over to enlightenment@

Back to the pool.

Currently and in near future I don't have time to be responsible
for any port.

- Remove Mk/bsd.efl.mk
- Convert USE_EFL=libtool_hack to USES=libtool
- Convert USE_EFL=imlib2 to LIB_DEPENDS=libImlib2.so:...
- Bump PORTVERSION in graphics/imlib2 and in all ports
  which depends on imlib2

PR:		196062
Approved by:	portmgr

Take maintainership

- Reset maintainership of my ports

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Add USES=libtool.

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

(Only the first 15 lines of the commit message are shown above )

- STAGE-clean

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-wm)

Add an explicit dependency on pkgconf

Approved by:	portmgr (bapt)

- Update to 0.14

Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.

Bump all ports that directly depend on libglut because of the shlib version
change.

There are some extra items in this patch.

*) Because freeglut doesn't have the same dependancies as libglut, some ports
	need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
	with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
	remains now.
*) While here fix a png related build issue games/vegastrike.

Thanks to miwi for running the exp-run.

Approved by:	portmgr (miwi)

Collaboration with:	zeising@
Obtained from:	xorg-dev staging area.

- Fix PLIST

Reported by:    PH (pav, linimon)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

Sync to final (for now) bsd.autotools.mk

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- Update to 0.13

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with X

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Chase repocopy x11-wm/enlightenment --> x11-wm/e16

- Update to 0.12

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

- Remove conditional checks for FreeBSD 5.x and older

Approved by:    pav

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 0.11

Approved by:    miwi (mentor)

- Fix E-Cpu and E-Load on UP systems

PR:             122605
Submitted by:   Daniel Holmes <danielh@holmesonics.com>
Approved by:    miwi (mentor)

- Update to 0.10
- Port most epplets to FreeBSD
- Exclude Mountbox from the build (too much Linux-dependent)
- Exclude Xss from the build (what is it really good for?)

Approved by:    miwi (mentor)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update e17 ports to 20070223 snapshot
- Bump portrevisions on all imlib2-dependend ports as the library soversion
  was bumped [1]
- Disable fade-in effects in x11-fm/evidence permanently, since evas doesn't
  support it anymore. [2]

The patch was tested in the tinderbox.

Approved by:    portmgr (marcus) [1],
                Anders Troback <freebsd@troback.com> (maintainer) [2]

- Respect X11BASE

Reported by:    pointyhat

- s,INSTALLS_SHLIB,USE_LDCONFIG,g

Upgrade to 0.9.

Remove USE_REINPLACE from categories starting with X

change enlightenment's binary to e16.

Submitted by:   kris@

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Chase libversion bumb to libMagick.so.9

PR:             ports/91270

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Use MAKE_ARGS & libtool 15

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

- Fix build

PR:             ports/63011
Submitted by:   Ports Fury

BROKEN on 5.x: Does not compile (missing dependency)

Remove the dependency on libgtop.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

- Update to version 0.7

PR:             60076
Submitted by:   Ports Fury

- Fix build in post if_xname world
- Pet portlint

PR:             ports/59452
Submitted by:   brooks

De-pkg-comment.

machine/soundcard.h -> sys/soundcard.h

Submitted by:   bento

Reset undeliverable maintainer email address to ports@FreeBSD.org

fix malloc.h problem

PR:             45191
Submitted by:   thinker@branda.to

Maintainer update.  Remove duplicate MASTER_SITES.    

Update MASTER_SITES.    

Change MAINTAINER from nakai to cmc@groupofnine.net.    

Fix MASTER_SITES patch    

Add a dependency to ImageMagick    

Layout fixes in x11-wm.    

Extract libepplet from the epplets port now that has it's own port.    

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

Final round of the INSTALLS_SHLIBS=yes conversion. Few remaining ports with  
ldconfig in PLIST need personal consideration.    

Number of commits found: 72

15 vulnerabilities affecting 139 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2018-11-12 20:18:51