Current status

Number of commits found XX: 41

Reset maintainer on compiz and related ports

Reset the maintainer on x11-wm/compiz and a few related ports.
Update MASTERDIR to make them fetchable again.

PR:		246461 246442
Submitted by:	Chris Hutchinson (new maintainer)
Approved by:	Daniel Austin (previous maintainer)
MFH:		2020Q2

x11*: Add missing USES={gl,gnome,mate}

Use helpers to avoid including pre.mk and post.mk

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

8 ports categories: Remove $PTHREAD_LIBS

Categories: archivers, dns, french, japanese, news, port-mgmt, x11-wm

The sysutils port was setting configure argument, so the text wasn't
removed but the value of PTHREAD_LIBS was changed.

approved by:	PTHREAD blanket

Split devel/gettext in devel/gettext-runtime and devel/gettext-tools.  The
first contains runtime libraries such as libintl and the latter contains
developer tools such as msgfmt.  Ports that use gettext will usually need
a LIB_DEPENDS on gettext-runtime and a BUILD_DEPENDS on gettext-tools.

USES=gettext-runtime can be used to set a LIB/BUILD/RUN_DEPENDS on
devel/gettext-runtime and USES=gettext-tools can be used to set a
BUILD/RUN_DEPENDS on devel/gettext-tools.  USES=gettext is now the same
as "USES=gettext-runtime gettext-tools" meaning a LIB_DEPENDS on
devel/gettext-runtime and a BUILD_DEPENDS on devel/gettext-tools.

Update gettext to 0.19.3.

Remove :oldver from converters/libiconv and devel/gettext-runtime.  Leave
symlinks with the old library versions to avoid the need to bump
PORTREVISION on a large number of dependent ports.  When most of the
dependent ports have had normal version updates, PORTREVISION can be
bumped on the remaining ones (low number) and the links can be removed.

Fix some ports that installed files in lib/locale instead of share/locale.

PR:		194038
Reviewed by:	bapt
Exp-run:	antoine
Approved by:	portmgr (antoine)

- Update to 0.8.8

PR:		190535
Submitted by:	Daniel Austin

Unbreak

- Convert USE_BZIP2/XZ to USES

Approved by:	portmgr

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

(Only the first 15 lines of the commit message are shown above )

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

(Only the first 15 lines of the commit message are shown above )

- Add stage support
- Convert USE_GMAKE to USES
- Remove the indefinite article from COMMENT
- Add libtool to USES
- Use options helpers

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-wm)

Finish converting the whole ports tree to USES=pkgconfig

Drop support for old versions of FreeBSD from unmaintained ports

Reviewed by:	miwi

Mechanically convert unmaintained ports which use "gnomehack" to use "pathfix"
instead.

Add USE_PKGCONFIG

Fix options

PR:             ports/168615
Submitted by:   Barbara <barbara.xxx1975@libero.it>

- update png to 1.5.10

Convert to new options framework

- Fix hidden dependency on libinotify
- Link with libinotify correctly which fixes dependent ports dying with rtld
error
- Minor port cleanups

PR:             166296
Submitted by:   Ivan Klymenko <fidaj@ukr.net>
Feature safe:   yes

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Reassign to the heap

Sync to new bsd.autotools.mk

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Add some additional brackets to clarify when the extra patch is needed

Fix build with or without the scandir changes.

Feature safe:   yes

Remove a patch that doesn't seem to be needed anymore.

Reported by:    andrew deryabin <andrew@deryabin.com>

- update to jpeg-8

Update to 0.8.4

I'm not dealing with kde4 support right now, patches welcome.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Update to 0.8.2

        o Start removing the fusion name from plugins.

Update to 0.7.8

Approved by:    garga (mentor), portmgr

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

Update my email address to my @FreeBSD.org address.

Approved by:    garga (mentor)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Pass maintainership back to rnoland - he's back online.
Sorry about this and welcome back!

Approved by:    garga (implicit)

Reset maintainer due to bouncing mails.
Discussed with pav.

Submitted by:   miwi on IRC
Approved by:    garga (mentor)

- Update compiz-fusion components to 0.6.0.
- Add new compiz-fusion meta-port.

Submitted by:   maintainer

Libcompizconfig is an alternative configuration system for
compiz and provides the following features:
- Automatic plugin list generation.
- Import/Export of the current configuration.
- Configuration profiles.
- Parsing of Compiz metadata files to provide an easy to use API for
configuration managers.
- Conflict handling for plugins and actions.
- Support for different configuration storage backends.
- Desktop environment integration. If a backend provides desktop
environment integration, then Compiz will share the keybindings
and settings with the default desktop environment window
manager like metacity or kwin.
- Its own Compiz configuration plugin "ccp" to provide all features
of libcompizconfig with compiz.

WWW: http://forums.compiz-fusion.org/

PR:     ports/116136
Submitted by: Robert Noland <rnoland@2hip.net>

Number of commits found XX: 41

10 vulnerabilities affecting 79 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-03-05 21:21:29