07:54 antoine 

Deprecate a few ports

With hat:	portmgr

 

12:47 bapt 

wxGTK3.0: switch to gtk3 and webkit2

Discussed with:	portmgr

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

09:05 amdmi3 

- Add NO_ARCH
- Switch to options helpers

 

09:11 rakuco 

Reset ports maintained by horia@racoviceanu.com.

The last change submitted or approved by Horia in Bugzilla dates back to
September 2015. Since then, all commits to his ports were landed by others
after the maintainer timeout period expired (see r383744, r405055, r405057,
r400461 and r414655, for example).

Horia did show interest in coming back after I sent a private email a few
months ago, but since nothing has changed it is better to reassign his ports
back to the heap.

Differential Revision:	https://reviews.freebsd.org/D5980

 

14:33 mat 

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

 

18:16 mva 

- Convert ports from korean/, shells/, x11/, x11-clocks/, x11-fm/,
  x11-fonts/, x11-toolkits and x11-wm to new USES=python

Approved by:	portmgr (implicit)

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

14:20 wg 

x11-wm/obapps: use WX 3.0

Approved by:	portmgr (bapt, blanket)

 

20:27 nemysis 

These ports are no longer used or cared for.

Horia Racoviceanu <horia@racoviceanu.com> wishes to maintain these ports
with my help.

misc/lxde-common

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com

misc/xdg-menu

- Change Makefile header, use my name and @FreeBSD.org email
- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Change Desktop entry file
- Add DOCS Option
- Break lines around 80 characters
- Change pkg-plist, remove mtree

sysutils/lxinput

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com

sysutils/lxtask

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Remove TODO from DOCS

sysutils/lxterminal

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Change pkg-plist, add missing

x11/florence

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Use tar:bzip2 instead of USE_BZIP2=yes and not needed desktop-file-utils
- Remove not needed MAN1 from Makefile

x11/libfm

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Use tar:xz instead of USE_XZ=yes
- Change pkg-plist, remove mtree

x11/lxde-meta

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com

x11/lxmenu-data

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Change pkg-plist, remove mtree

x11/lxpanel

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Strip libraries
- Change pkg-plist, add missing

x11/menu-cache

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- USES pathfix instead of USE_GNOME gnomehack
- Strip library

x11-fm/pcmanfm

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Use tar:xz instead of USE_XZ=yes
- Change pkg-plist, remove mtree, add missing

x11-themes/lxde-icon-theme

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Use tar:bzip2 instead of USE_BZIP2=yes
- Change pkg-plist, remove mtree

x11-wm/lxmed

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com

x11-wm/lxsession

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Change pkg-plist, add missing

x11-wm/obapps

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Add DOCS Option
- Change Desktop entry file

x11-wm/obmenu

- Bump PORTREVISION
- Pass maintainership to horia@racoviceanu.com
- Change Desktop entry file
- Break lines around 80 characters

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

16:45 nemysis 

OBApps is a graphical tool for configuring the per-application settings
(window matching) in the Openbox window manager.

OBApps uses ~/.config/openbox/rc.xml
(or the config-file Openbox was started with) by default.
You can specify another file as an argument, e.g.
    obapps.py .config/openbox/myrc.xml

Enter or change the name, class, role, or type settings by clicking in their
entries in the listbox.

Using the Find button to get settings by clicking on a window changes the
settings for the CURRENTLY SELECTED  item in the listbox; it does not add
a new entry unless nothing is highlighted. You'll usually want to use the New
button to create a new item first.

(Only the first 15 lines of the commit message are shown above )