| non port: x11/libxklavier/Makefile |
|
SVNWeb
|
Number of commits found: 66 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] d357bca (Only the first 10 of 288 ports in this commit are shown above. )
x11: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Adam Weinberger <adam@vectors.cx>
* Adam Weinberger <adamw@FreeBSD.org>
* Alex Dupre <ale@FreeBSD.org>
* Alexander Matey <matey@cis.ohio-state.edu>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alexey Dokuchaev <danfe@regency.nsu.ru>
* Alexey Mikhailov <karma@ez.pereslavl.ru>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anton Berezin <tobez@FreeBSD.org>
* Anton Toernqvist <antont@inbox.lv> (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 10 Apr 2022
|
[ 19:11 Charlie Li (vishwin) ] d63665f (Only the first 10 of 892 ports in this commit are shown above. )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
|
|
Sat, 26 Mar 2022
|
[ 08:27 Matthias Fechner (mfechner) ] 247c7db (Only the first 10 of 867 ports in this commit are shown above. )
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 7 Nov 2019
|
[ 18:36 zeising ]   (Only the first 10 of 432 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories x
Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
|
|
Fri, 1 Apr 2016
|
[ 14:33 mat ] (Only the first 10 of 2136 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.
With hat: portmgr
Sponsored by: Absolight
|
[ 13:18 mat ] (Only the first 10 of 172 ports in this commit are shown above. )
Fixup some whitespace at the beginning of lines problems.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 18 Nov 2015
|
[ 18:52 kwm ]
When LANG is set to ru_RU.UTF-8 for example xfce4-keyboard-settings would
segfault. This was due to libxklavier passing invalid UTF-8 strings to
a few glib functions which require a UTF-8 string.
Add code to libxklavier to pass correct UTF-8 string to glib.
Submitted by: rum1cro@yandex.ru
|
|
Thu, 15 Jan 2015
|
[ 11:17 kwm ]
Update libxklavier to 5.3.
Obtained from: gnome dev repo
|
|
Wed, 19 Nov 2014
|
[ 11:49 kwm ] (Only the first 10 of 1460 ports in this commit are shown above. )
The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.
This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.
Apart from updating ports to newer versions
GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.
Shell Extensions can be installed via https://extensions.gnome.org/ , we have (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 23 Apr 2014
|
[ 13:25 tijl ] (Only the first 10 of 462 ports in this commit are shown above. )
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 16 Apr 2014
|
[ 18:28 zeising ] (Only the first 10 of 1008 ports in this commit are shown above. )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 11 Apr 2014
|
[ 09:55 bapt ] (Only the first 10 of 14 ports in this commit are shown above. )
Stageify libxkalvier
USES libtool
Chase libxklavier shlib change
On all ports depending on libxklavier:
- Support stage
- USES=libtool when possible to reduce overlinking
- Support packaging as a user
|
|
Fri, 20 Sep 2013
|
[ 23:43 bapt ] (Only the first 10 of 483 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
x11)
|
|
Mon, 2 Sep 2013
|
[ 13:54 bapt ]
Add an explicit dependency on pkgconf
|
|
Wed, 20 Mar 2013
|
[ 02:01 mezz ]
-Add a missing dependency, xi. Bump the PORTREVISION.
-gnomehack -> USES=pathfix
PR: ports/175970
Submitted by: pawel
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Mon, 10 May 2010
|
[ 21:19 kwm ] (Only the first 10 of 772 ports in this commit are shown above. )
Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .
This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.
Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.
Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues. (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 28 Nov 2009
|
[ 20:06 marcus ] (Only the first 10 of 823 ports in this commit are shown above. )
Presenting GNOME 2.28.1 for FreeBSD. The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.
On the FreeBSD front, though, a lot went into this release. Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration. Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.
But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.
(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 22 Aug 2009
|
[ 00:39 amdmi3 ] (Only the first 10 of 148 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with X
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Fri, 10 Apr 2009
|
[ 05:56 marcus ] (Only the first 10 of 480 ports in this commit are shown above. )
Presenting GNOME 2.26 for FreeBSD. See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider. Almost all of the Gecko consumers
can make use of this provider by setting:
WITH_GECKO=libxul
The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.
|
|
Sat, 7 Feb 2009
|
[ 18:33 mezz ]
Update to 3.8.
|
|
Sat, 10 Jan 2009
|
[ 05:22 marcus ] (Only the first 10 of 718 ports in this commit are shown above. )
Presenting GNOME 2.24 for FreeBSD.
See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes. On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs. The documentation updates
to the website are forthcoming.
This release features commits by adamw, ahze, kwm, mezz, and myself. It would
not have been possible without are contributors and testers:
Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 6 Jun 2008
|
[ 14:09 edwin ] (Only the first 10 of 151 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Mon, 24 Mar 2008
|
[ 03:50 marcus ] (Only the first 10 of 712 ports in this commit are shown above. )
The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD. The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ . On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media. Work
is also underway to tie webkit more closely into GNOME. As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.
This release would not have been possible without the contributions and
testing efforts of the following people:
Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon
|
|
Thu, 20 Mar 2008
|
[ 10:09 pav ] (Only the first 10 of 29 ports in this commit are shown above. )
- Remove USE_GETOPT_LONG which is a no-op since March 2007
|
|
Wed, 24 Oct 2007
|
[ 23:37 marcus ] (Only the first 10 of 1479 ports in this commit are shown above. )
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Sun, 25 Mar 2007
|
[ 07:33 bland ]
Properly check for empty xml node set to avoid NULL pointer dereference.
This bug was source of g-s-d crashes on X systems with non standard
keyboard layout options.
|
|
Sat, 24 Mar 2007
|
[ 06:29 marcus ]
Update to 3.2 which fixes some more multi-layout crashes.
|
|
Mon, 19 Mar 2007
|
[ 05:14 marcus ] (Only the first 10 of 461 ports in this commit are shown above. )
Presenting GNOME 2.18 for FreeBSD. GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features. Not that it doesn't have its share of new and exciting
items. See http://www.gnome.org/start/2.18/ for all the goodies in
this release.
GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.
|
|
Tue, 27 Feb 2007
|
[ 21:02 mezz ]
Fix the crash when navigate in System->Preferences->Keyboard. Bump the
PORTREVISION.
PR: ports/108967
Bugzilla: http://bugzilla.gnome.org/show_bug.cgi?id=370038
Obtained from: fd.org CVS
Submitted by: Mark Evenson <mark.evenson@gmx.at>
|
|
Sat, 4 Nov 2006
|
[ 19:31 marcus ]
Mark IGNORE on 4.X as it does not build.
Reported by: pointyhat via kris
|
|
Sat, 14 Oct 2006
|
[ 08:54 marcus ] (Only the first 10 of 893 ports in this commit are shown above. )
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.
Submitted by: mezz, ahze, pav, and many others
Approved by: portmgr (implicit, kris)
|
|
Mon, 3 Apr 2006
|
[ 21:29 marcus ]
Fix a crash that could occur if any of the keyboard layouts had variants
(e.g. jp(latin) where latin the the variant of jp). The problem was a bad
use of realloc. Thanks to jasone for explaining the problem with the existing
code.
Reported by: bland
|
|
Thu, 16 Mar 2006
|
[ 04:40 marcus ]
Update to 2.2.
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 13 Dec 2005
|
[ 07:04 mezz ]
Update to 2.1.
Reminded by: edwin's "FreeBSD Ports Version Check" script
|
|
Sat, 10 Dec 2005
|
[ 05:08 marcus ]
Correct a problem setting GNOME keyboard layout options at login time.
Obtained from: http://bugzilla.gnome.org/show_bug.cgi?id=322955
Reported by: many
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Sat, 12 Mar 2005
|
[ 10:39 marcus ] (Only the first 10 of 436 ports in this commit are shown above. )
Presenting GNOME 2.10 for FreeBSD!
The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall. However, a lot of
FreeBSD specific additions and fixes have been made. For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support. See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.
GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work. We would also like to thank our adventurous users that chose to (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 1 Dec 2004
|
[ 01:46 marcus ]
Fix build with X.Org 6.8.1.
Submitted by: lesi
|
|
Mon, 25 Oct 2004
|
[ 13:14 bland ]
Do not return static memory which will be free()d by caller.
PR: 73089
Submitted by: Oleg Sharoiko <os@rsu.ru>
|
|
Tue, 12 Oct 2004
|
[ 00:12 marcus ]
Update to 1.04, and use the new libtool scheme.
|
|
Fri, 23 Jul 2004
|
[ 23:42 marcus ]
Bump PORTREVISION as these need to be recompiled with X.Org.
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Tue, 29 Jun 2004
|
[ 06:06 marcus ]
Update to 1.03.
|
|
Wed, 14 Apr 2004
|
[ 01:40 marcus ]
Update to 1.02.
|
|
Tue, 13 Apr 2004
|
[ 17:23 marcus ]
Update to 1.01.
|
|
Mon, 5 Apr 2004
|
[ 03:11 marcus ] (Only the first 10 of 426 ports in this commit are shown above. )
Presenting GNOME 2.6.0. The FreeBSD GNOME Team feels this our best release
ever. It fixes many bugs, and adds some features missing in previous
FreeBSD ports. To help users upgrade from GNOME 2.4, we have constructed an
upgrade FAQ at:
http://www.freebsd.org/gnome/docs/faq26.html
Please read it carefully. GNOME 2.6 packages are also available for all
supported i386 versions of FreeBSD at:
http://www.marcuscom.com/tinderbox/
The FreeBSD GNOME Team would like the thank the following users for their
wonderful testing and patching efforts. We would especially like to thank
Franz Klammer <klammer@webonaut.com> for his wonderful new splash screen.
Without these people, our team, and our team alumni, GNOME on FreeBSD would
not be possible.
Jeremy Messenger <mezz7@cox.net>
Khairil Yusof <kaeru@pd.jaring.my>
Koop Mast <kwm@rainbow-runner.nl>
Simon Barner <barner@in.tum.de>
Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Scott Dodson <sdodson@sdodson.com>
Vladimir Grebenschikov <vova@sw.ru>
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Wed, 4 Feb 2004
|
[ 05:10 marcus ] (Only the first 10 of 1422 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
|
|
Fri, 30 Jan 2004
|
[ 03:34 marcus ]
Revert back to 0.96 (with a PORTEPOCH bump). 0.97, though a micro release,
changed the API enough as to break gswitchit, and even gnome-control-center
2.5.
|
|
Wed, 28 Jan 2004
|
[ 20:09 marcus ]
Update to 0.97.
|
|
Thu, 25 Dec 2003
|
[ 01:40 marcus ]
Update to 0.96.
|
|
Mon, 17 Nov 2003
|
[ 12:29 trevor ] (Only the first 10 of 151 ports in this commit are shown above. )
USE_REINPLACE need be defined only when REINPLACE_CMD is used.
|
|
Thu, 23 Oct 2003
|
[ 06:58 bland ]
Update to 0.95
|
|
Thu, 3 Jul 2003
|
[ 00:03 marcus ]
Update to 0.90.
|
|
Fri, 13 Jun 2003
|
[ 01:27 marcus ]
Update to 0.80.
|
|
Mon, 2 Jun 2003
|
[ 22:03 marcus ]
* Update to 0.71
* Sign over maintainership to gnome@
Approved by: sobomax
|
|
Fri, 7 Mar 2003
|
[ 06:36 ade ] (Only the first 10 of 140 ports in this commit are shown above. )
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
|
|
Fri, 31 May 2002
|
[ 10:41 sobomax ]
Add libxklavier 0.2, an utility library to make XKB stuff easier.
|
Number of commits found: 66 |
As an Amazon Associate I earn from qualifying purchases.