notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.

Get notified when packages are built

A new feature has been added. FreshPorts already tracks package built by the FreeBSD project. This information is displayed on each port page. You can now get an email when FreshPorts notices a new package is available for something on one of your watch lists. However, you must opt into that. Click on Report Subscriptions on the right, and New Package Notification box, and click on Update.

Finally, under Watch Lists, click on ABI Package Subscriptions to select your ABI (e.g. FreeBSD:14:amd64) & package set (latest/quarterly) combination for a given watch list. This is what FreshPorts will look for.

non port: x11/py-qt4-opengl/pkg-plist

Number of commits found: 11

Thursday, 22 Nov 2018
20:18 tcberner search for other commits by this committer
pyqt: Change install directories for Python flavor support

* PyQt could not be installed for multiple Python versions at
  the same time, as there were conflicting files.

  This patch creates Python-version versioned directories for
  all these, and further installs binaries with a version number.

* Note, there might be some hickups for software that depends on
  on of the .so's provided by PyQt5, which might not be found
  anymore autmotically, and maybe need some LD-flaggery.

* Update PyQt5 to 5.10.1

* Mark www/py-qt5-webengine broken. It is unforuntately no longer
  compatible with the old qt5-webengine-5.9.4 we ship.

PR:		232745
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D8714
Original commitRevision:485614 
Tuesday, 8 Dec 2015
16:49 rakuco search for other commits by this committer
PyQt: Replace bsd.pyqt.mk with Uses/pyqt.mk.

In preparation for landing PyQt5 ports, generalize devel/py-qt4's
bsd.pyqt.mk and make it a proper file in Uses/.

Ports wishing to depend on PyQt4 ports can now do the following:
  USES=		pyqt:4
  USE_PYQT=	foo bar_build baz_run

Other changes include the renaming of the PYQT4_DIST variable to PYQT_DIST
and the introduction of the PYQT_SIPDIR plist substitution variable. The
rest of the contents of Uses/pyqt.mk are pretty much identical to what we
had in bsd.pyqt.mk with additional processing of USE_PYQT.

Even though this patch touches files in many different ports, the goal is
for it to be a no-op from an end-user perspective (so that the basic
infrastructure is landed before the other, riskier changes): no dependencies
have been changed, PyQt/SIP/QScintilla have not been upgraded and the plists
should remain exactly the same, since PYQT_SIPDIR currently contains the
same value that used to be hardcoded in the plists.

Huge thanks to Guido Falsi (madpilot@) for spearheading most of the work: he
took the initiative to work on PyQt5 and sent D2910 to Phabricator with the
original version of this patch. Tobias Berner (tcberner@gmail.com) later
applied it to kde@'s experimental area51 repositories and did some more work
on it.
Original commitRevision:403297 
Monday, 2 Feb 2015
01:26 amdmi3 search for other commits by this committer
- Drop @dirrm* from pkg-plists

Approved by:	portmgr blanket
Original commitRevision:378286 
Wednesday, 23 Jul 2014
19:53 rakuco search for other commits by this committer
Update PyQt to 4.11.1, QScintilla to 2.8.3 and SIP to 4.16.2.

... And bump PORTREVISION on ports that depend on devel/qscintilla2 due to
the shlib version change.

This is brought to you by the KDE on FreeBSD team. Besides updating to newer
upstream releases, this commit also contains a lot of under-the-hood changes
to the PyQt/QScintilla/SIP ports. Their Makefiles had accumulated a lot of
cruft over time, so it was time for some summer cleaning:

- General, belated changes:
  * Use OPTIONS helpers wherever possible, stop including
    <bsd.port.options.mk> when not necessary, stop checking for
    ${PORT_OPTIONS:MDOCS} and ${PORT_OPTIONS:MEXAMPLES} when not necessary,
    add options such as DOCS and/or DEBUG where they were only checked for.

- QScintilla ports:
  * Drop the API option from py-qt4-qscintilla2. It had been broken ever
    since staging support was added, and its existence does not make much
    sense: QScintilla is a hard dependency regardless of the state of this
    option anyway, they all come from the same tarball and the configuration
    script assumes the .api file will always be installed.

- PyQt ports:
  * The configure.py patch shared by all PyQt ports has been trimmed down to
    the minimum. Changes for Qt3 compatibility or for things that are just
    not needed anymore have been removed.

  * Several post-configure targets in the PyQt ports have been removed, as
    they had no effect on the way the ports were built whatsoever.

  * In some cases, instead of calling Python's py_compile.py on `ls *.py
    */*.py */*/*.py` to generate .pyc and .pyo files, we just call
    compileall.py, which is made for this kind of task.

  * The patch + sed hack to build py-qt4-dbussupport has been replaced by
    only extracting the dbus/ directory for that port and excluding it from
    all others.

  * Move the bulk of the code in all Makefiles to bsd.pyqt.mk, like the
    non-Python Qt ports do with bsd.qt.mk and the QT_DIST variable. A large
    portion of all PyQt Makefiles were very similar and contained a lot of
    boilerplate code that can be shared among all of them since they all
    come from the same tarball. bsd.pyqt.mk now has a PYQT4_DIST variable
    that, when set, automatically sets several common variables and the
    do-configure target for a port. This allows us to considerably reduce
    the size of all the py-qt4-* Makefiles.

  * To make the above possible and also to allow us to use as many OPTIONS
    helpers as possible, the ARGS variable is now called CONFIGURE_ARGS.
    That's what it was used for anyway.

PR:		191990
Original commitRevision:362721 
Saturday, 9 Jun 2012
00:41 makc search for other commits by this committer
Merge changes from area51 repository (SVN commit 8197 by avilla):

- Remove SIPFILES option, some ports (e.g., pykde4) require the files
  to be installed.
- Remove DEBUG and TRACING options, and merge them under WITH_DEBUG.
Original commit
Thursday, 2 Dec 2010
19:47 makc search for other commits by this committer
KDE FreeBSD team is glad to present Qt 4.7.1 in ports.

Along with Qt4 the following ports are updated:

PyQt4 ports to 4.8.1
devel/py-sip to 4.11.2
devel/qscintilla2 to 2.4.5
PyKDE3 to 3.16.7
PyQt3 tp 3.18.2-snapshot-20091119

New ports added:
devel/qt4-declarative
devel/py-qt4-declarative
x11/qt4-graphicssystems-opengl

This release has been contributed by:
Thomas Abthorpe (tabthorpe)
Max Brazhnikov (makc)
Dima Panov (fluffy)
Alberto Villa (avilla)

We'd like to thank Martin Wilke (miwi) for exp-run.
Original commit
Tuesday, 11 May 2010
10:43 fluffy search for other commits by this committer
- The FreeBSD KDE team is pleased to announce SIP-4.10.2, PyQt-4.7.3
        and QScintilla-2.4.3 for FreeBSD.

With hat on:    kde@
Original commit
Saturday, 30 Jan 2010
14:27 fluffy search for other commits by this committer
The KDE FreeBSD team is proud to announce the release of SIP-4.10 and
PyQt-4.7 for FreeBSD. The official update notes can be found at
http://www.riverbankcomputing.com

We'd like to say thanks to all helpers, testers and submitters.
Original commit
Saturday, 14 Feb 2009
22:58 makc search for other commits by this committer
Update PyQt4 ports to 4.4.4, new ports:
devel/py-qt4-help
multimedia/py-qt4-phonon
textproc/py-qt4-xmlpatterns
www/py-qt4-webkit

Update QScintilla2 to 2.3.2, PyQt3 to 3.17.6, PyKDE3 to 3.16.2.

Pass maintainership to kde@FreeBSD.org. Thanks Danny Ricin for his great work.

PR:             based on ports/130219
Submitted by:   Dima Panov" <fluffy at fluffy.khv.ru>
Original commit
Thursday, 13 Sep 2007
18:15 miwi search for other commits by this committer
- Update to PyQt-4.3

Submitted by:   Danny Pansters <danny@ricin.com> (maintainer via privat mail)
Original commit
Tuesday, 27 Mar 2007
10:06 miwi search for other commits by this committer
PyQt4 is a set of Python bindings for Trolltech's Qt4 application framework.
This package provides the QtOpenGL module.

WWW: http://www.riverbankcomputing.co.uk/pyqt/

PR:             ports/109628
Submitted by:   Danny Pansters <danny at ricin.com>
Original commit

Number of commits found: 11