non port: x11/xcb-util/Makefile |
Number of commits found: 39 |
Tuesday, 20 Jun 2023
|
12:57 Renato Botelho (garga)
x11/xcb-util: Update to 0.4.1
Sponsored by: Rubicon Communications, LLC ("Netgate")
feab095 |
Wednesday, 7 Sep 2022
|
21:10 Stefan Eßer (se)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
b7f0544 |
Wednesday, 20 Jul 2022
|
14:23 Tobias C. Berner (tcberner)
x11: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Adam Weinberger <adam@vectors.cx>
* Adam Weinberger <adamw@FreeBSD.org>
* Alex Dupre <ale@FreeBSD.org>
* Alexander Matey <matey@cis.ohio-state.edu>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alexey Dokuchaev <danfe@regency.nsu.ru>
* Alexey Mikhailov <karma@ez.pereslavl.ru>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anton Berezin <tobez@FreeBSD.org>
* Anton Toernqvist <antont@inbox.lv>
* Anton Tornqvist <antont@inbox.lv>
* Ashish Shukla <wahjava@gmail.com>
* Ben Woods <woodsb02@FreeBSD.org>
* Bert Burgemeister <trebbu@googlemail.com>
* Bruce A. Mah <bmah@ca.sandia.gov>
* Bruce M Simpson <bms@FreeBSD.org>
* Chris Hutchinson <portmaster@BSDforge.com>
* Cy SChubert <cy@FreeBSD.org>
* Cy Schubert <Cy.Schubert@uumail.gov.bc.ca>
* Cy Schubert <cy@FreeBSD.org>
* DaJoob
* Daniel Roethlisberger <daniel@roe.ch>
* Daniel Walter <sahne@0x90.at>
* Danilo Egea Gondolfo <danilo@FreeBSD.org>
* Dave Grochowski
* David Mackay <davidjx8p@gmail.com>
* David Yeske <dyeske@gmail.com>
* Dejan Lesjak <lesi@FreeBSD.org>
* Denis Shaposhnikov <dsh@vlink.ru>
* Dennis Herrmann <dhn@FreeBSD.org>
* Dmitri Goutnik <dg@syrec.org>
* Dominik Rothert <dr@domix.de>
* Emanuel Haupt <ehaupt@FreeBSD.org>
* Emanuel Haupt <ehaupt@critical.ch>
* Eric Anholt <anholt@FreeBSD.org>
* Eric Blood <eblood@cs.unr.edu>
* Eric L. Hernes <erich@rrnet.com>
* Eric Turgeon <ericbsd@FreeBSD.org>
* Eric Turgeon <ericturgeon.bsd@gmail.com>
* Evgeni Dimitrov <evgeni.dimitrov@gmail.com>
* FURUSAWA,Kazuhisa <kazu@jp.freebsd.org>
* Florent Thoumie <flz@xbsd.org>
* Foxfair Hu <foxfair@FreeBSD.org>
* Francis Bacque <idroxid01@yahoo.fr>
* Franz Klammer <klammer@webonaut.com>
* Gerrit Beine <tux@pinguru.net>
* Grzegorz Blach <gblach@FreeBSD.org>
* Gustau Perez i Querol <gustau.perez@gmail.com>
* Gvozdikov Veniamin <g.veniamin@googlemail.com>
* Hendrik Scholz <hendrik@scholz.net>
* Jacob House <jacob@jwfh.ca>
* James Earl <jdearl@telus.net>
* Jean-Baptiste Quenot <jb.quenot@caraldi.com>
* Jeroen Schot <schot@a-eskwadraat.nl>
* Jim Mock <jim@FreeBSD.org>
* Joe Marcus Clarke <marcus@FreeBSD.org>
* Julien Laffaye <kimelto@gmail.com>
* KIMURA Yasuhiro <yasu@utahime.org>
* Ka Ho Ng <khng300@gmail.com>
* Kelly Yancey <kbyanc@posi.net>
* Ken Moore <ken@pcbsd.org>
* Koop Mast <einekoai@chello.nl>
* Koop Mast <kwm@FreeBSD.org>
* Kris Kennaway <kris@FreeBSD.org>
* Kris Moore <kmoore@FreeBSD.org>
* Lars Engels <lars.engels@0x20.net>
* Lin, Cheng-Tao <b89605222@ntu.edu.tw>
* MANTANI Nobutaka <nobutaka@nobutaka.com>
* Markus Brueffer <markus@FreeBSD.org>
* Martin Ranne <gasp@ridcully.dnsalias.org>
* Martin Tournoij <carpetsmoker@xs4all.nl>
* Martin Wilke (miwi@FreeBSD.org)
* Martin Wilke <miwi@FreeBSD.org>
* Matt Lancereau
* Matt Lancereau <matt@rimasec.net>
* Matt Peterson <matt@peterson.org>
* Matthew Donovan <kitchetech@gmail.com>
* Matthew Fuller <fullermd@futuresouth.com>
* Matthew Hunt <mph@pobox.com>
* Matthew West <mwest@uct.ac.za>
* Maxim Sobolev <sobomax@FreeBSD.org>
* Michael Johnson <ahze@FreeBSD.org>
* Michiel Overtoom <motoom@xs4all.nl>
* Mikhail Teterin <mi@aldan.algebra.com>
* Morten Slot Kristensen
* Murray Stokely <murray@FreeBSD.org>
* NAKATA, Maho <maho@FreeBSD.org>
* Nicola Vitale <nivit@FreeBSD.org>
* Nikos Ntarmos <ntarmos@ceid.upatras.gr>
* Nikos Ntarmos <ntarmos@cs.uoi.gr>
* Oleg Pudeyev <oleg@bsdpower.com>
* Oliver Breuninger <ob@breuninger.org>
* Oliver Breuninger <ob@seicom.NET>
* Oliver Lehmann <oliver@FreeBSD.org>
* Olivier Cochard-Labbe <olivier@FreeBSD.org>
* Olivier Duchateau
* Patrick Li <pat@databits.net>
* Pawel Worach <pawel.worach@gmail.com>
* Pedro Giffuni
* Per Otterstr=F6m <pelle@fukt.bth.se>
* Petr Holub <hopet@ics.muni.cz>
* Pietro Cerutti <gahr@FreeBSD.org>
* Piotr Kubaj <pkubaj@anongoth.pl>
* Roman Bogorodskiy <novel@FreeBSD.org>
* Sakai Hiroaki <sakai@miya.ee.kagu.sut.ac.jp>
* Sakai Hiroaki <sakai@seki.ee.kagu.sut.ac.jp>
* Samy Al Bahra <samy@kerneled.org>
* Samy Al Bahra <sbahra@kerneled.org>
* Sascha Holzleiter <sascha@root-login.org>
* Satoshi Asami <asami@FreeBSD.org>
* Satoshi TAOKA
* Scott Mace <smace@FreeBSD.org>
* Sean Farley <sean-freebsd@farley.org>
* Sebastian Yepes <esn@x123.info>
* Serge Gagnon <gagnon__s@videotron.ca>
* Sergei Kolobov <sergei@kolobov.com>
* Sofian Brabez <sbz@FreeBSD.org>
* Stanislav Sedov <stas@FreeBSD.org>
* Stepan Zastupov [RedChrom] <redchrom@gmail.com>
* Stephen Montgomery-Smith <stephen@math.missouri.edu>
* Stijn Hoop <stijn@win.tue.nl>
* Tatsumi Hosokawa
* Theron Tarigo <theron.tarigo@gmail.com>
* Thomas Gellekum <tg@FreeBSD.org>
* Thomas Hurst <tom@hur.st>
* Tim Bishop <tim@bishnet.net>
* Timothy Beyer <beyert@cs.ucr.edu>
* Tobias Roth <ports@fsck.ch>
* UMENO Takashi <umeno@rr.iij4u.or.jp>
* Vincent Tantardini <vinc@freebsd-fr.org>
* Volker Stolz <stolz@i2.informatik.rwth-aachen.de>
* Winston Weinert <winstonw@lavabit.com>
* Ying-Chieh Liao <ijliao@csie.nctu.edu.tw>
* Yinghong Liu <relaxbsd@gmail.com>
* Yoshiro MIHIRA <sanpei@sanpei.org>
* Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
* Zane C. Bowers
* Zhihao Yuan <lichray@gmail.com>
* asami
* chinsan
* dirk.meyer@dinoex.sub.org
* dom@myrddin.demon.co.uk
* eimar.koort
* gpalmer
* gpalmer@FreeBSD.org
* grog
* gurkan@phys.ethz.ch
* hemi@puresimplicity.net
* ijliao
* incabulos@mac.com
* jacs
* janek
* jhb
* jkh
* jkh@FreeBSD.org
* jmz
* joerg
* johalun0@gmail.com
* jonny
* jsellens
* krion
* matt@bdd.net
* michael johnson <ahze@ahze.net>
* nkazushi@highway.or.jp
* od <od@iclub.nsu.ru>
* oleg@bsdpower.com
* roam@FreeBSD.org
* trevor
* will
With hat: portmgr
d357bca |
Tuesday, 6 Apr 2021
|
14:31 Mathieu Arnold (mat)
Remove # $FreeBSD$ from Makefiles.
305f148 |
Sunday, 3 Nov 2019
|
21:56 zeising
Switch all ports to use USES=xorg-cat
Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports
|
Thursday, 1 Dec 2016
|
17:05 garga
- Fix strip during install
- Add LICENSE
- Bump PORTREVISION
PR: 213234
Submitted by: takefu@airport.fm
MFH: 2016Q4
|
Saturday, 18 Apr 2015
|
15:34 kwm
Misc X.org port updates:
Update gccmakedep to 1.0.3.
Update imake to 1.0.7.
Update libpciaccess to 0.13.3.
Update libdrm to 2.4.60.
Update bitmap to 1.0.8.
Update fstobdf to 1.0.6.
Update iceauth to 1.0.7.
Update libXdmcp to 1.1.2.
Update libXp to 1.0.3.
Update libXvMC to 1.0.9.
Update libXxf86vm to 1.1.4.
Update libxshmfence to 1.2.
Update randrproto to 1.4.1.
Update rgb to 1.0.6.
Update sessreg to 1.1.0.
Update xcb-util-cursor to 0.1.2.
Update xedit to 1.2.2.
Update xkbcomp to 1.3.0.
Update xkeyboard-config to 2.14.
Update xproto to 7.0.27.
Update xf86-input-mouse to 1.9.1.
Update xf86-input-synaptics to 1.8.2.
Update xf86-video-i710 to 1.3.5.
Update xf86-video-mga to 1.6.4.
Update xf86-video-tdfx to 1.4.6.
Update xf86-video-vmware to 13.1.0.
Update bdftopcf to 1.0.5.
Update font-util to 1.3.1.
Update fslsfonts to 1.0.5.
Update mkfontscale to 1.1.2.
Update showfont to 1.0.5.
Update xfs to 1.1.4.
Update xfsinfo to 1.0.5.
Remove :keepla from USES=libtool for X libraries in bsd.xorg.mk, and bump
all affected ports.
PR: 199400
Obtained from: Xorg-devel repo
|
Monday, 12 Jan 2015
|
14:32 garga
Update x11/xcb-util, x11/xcb-util-image and x11/xcb-util-keysyms to 0.4.0
|
Friday, 8 Aug 2014
|
08:42 olgeni
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. A few Makefiles
where not included as they contain Latin-1 characters that break
the Phabricator workflow. Category X.
CR: D511
Approved by: portmgr (bapt)
|
Friday, 16 May 2014
|
15:29 garga
Move to USES=tar:bzip2
|
Wednesday, 23 Apr 2014
|
13:25 tijl
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
|
Wednesday, 16 Apr 2014
|
18:28 zeising
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.
Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.
Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.
Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.
Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics
Thanks to: all testers, bdrewery and the FreeBSD x11@ team
exp-run by: bdrewery [1]
PR: ports/187602 [1]
Approved by: portmgr (bdrewery), core (jhb)
|
Thursday, 31 Oct 2013
|
23:51 garga
Support STAGE
|
Friday, 20 Sep 2013
|
23:43 bapt
Add NO_STAGE all over the place in preparation for the staging support (cat:
x11)
|
Monday, 2 Sep 2013
|
13:54 bapt
Add an explicit dependency on pkgconf
|
09:45 garga
Change my ports to USES (gmake|perl5)
|
Saturday, 25 May 2013
|
14:37 zeising
The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:
Xorg 7.7
Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities
Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.
PR: ports/177942
Exp-run by: miwi
Approved by: portmgr (miwi)
Thanks to all who helped testing!
|
Tuesday, 11 Dec 2012
|
01:29 garga
Remove unecessary dependency (gperf) and bump PORTREVISION
PR: ports/174328
Submitted by: Niclas Zeising <zeising@daemonic.se>
|
Monday, 10 Dec 2012
|
19:08 garga
- Update xcb-util to 0.3.9
- Update xcb-util-wm to 0.3.9
- Update xcb-util-keysyms to 0.3.9
- Update xcb-util-image to 0.3.9
- Bump PORTREVISION on dependant ports
|
Friday, 5 Oct 2012
|
12:41 garga
Change headers of all ports maintained by me to new format
|
Monday, 2 Jul 2012
|
22:21 garga
Remove lib version from LIB_DEPENDS to silence portlint
|
Sunday, 15 Jan 2012
|
12:46 garga
Update xcb-util to 0.3.8, that was splitted in few modules, so, i'm adding the
following new ports:
xcb-util-image
xcb-util-keysyms
xcb-util-renderutil
xcb-util-wm
As approved by maintainer, i'm taking over the maintainership
Exp-run by: pav
|
Friday, 16 Dec 2011
|
11:26 novel
Revert previous commit and roll back to 0.3.6 as the 0.3.8 introduces
a number of backward incompatible changes.
Pointy hat to: novel
|
Thursday, 15 Dec 2011
|
17:52 novel
Update to 0.3.8.
PR: 163301
Submitted by: Nikos Ntarmos (maintainer)
|
Saturday, 4 Dec 2010
|
07:34 ade
Sync to new bsd.autotools.mk
|
Wednesday, 28 Oct 2009
|
02:28 amdmi3
- Fix division by zero bug
PR: 139863
Submitted by: Nikos Ntarmos <ntarmos@cs.uoi.gr>
Reported by: Ashish Shukla <wahjava@gmail.com>
|
Thursday, 10 Sep 2009
|
18:31 garga
Update to 0.3.6
PR: ports/138183
Submitted by: garga
Approved by: Nikos Ntarmos <ntarmos@cs.uoi.gr> (maintainer)
|
Sunday, 2 Aug 2009
|
19:36 mezz
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
Tuesday, 16 Jun 2009
|
18:03 dhn
- Update to 0.3.5
PR: ports/135482
Submitted by: Ashish SHUKLA <wahjava@gmail.com>
pproved by: Nikos Ntarmos <ntarmos@cs.uoi.gr> (maintainer)
|
Sunday, 14 Jun 2009
|
22:23 dhn
- Chase libxcb/xcb-proto update
- Bump PORTREVSION
|
Wednesday, 6 May 2009
|
23:05 amdmi3
- Update to 0.3.4
PR: 133819
Submitted by: Nikos Ntarmos <ntarmos at cs dot uoi dot gr> (maintainer)
|
Saturday, 14 Mar 2009
|
13:45 miwi
- Update Maintainer mail adress
Submitted by: Nikos Ntarmos <ntarmos@cs.uoi.gr> (maintainer via private mail)
|
Thursday, 5 Feb 2009
|
02:15 rafan
- Update to 0.3.3
PR: ports/131222
Submitted by: Nikos Ntarmos <ntarmos at ceid.upatras.gr> (maintainer)
|
Friday, 23 Jan 2009
|
16:28 flz
- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
|
Thursday, 8 Jan 2009
|
17:12 miwi
- Update to 0.3.0
PR: 128051
Submitted by: Perrin Alexandre <alexandre.perrin@epfl.ch>
Approved by: maintainer
|
Sunday, 7 Sep 2008
|
22:21 miwi
- Update to 0.2.1
PR: 126991
Submitted by: bf <bf2006a@yahoo.com>
Approved by: maintainer
|
Monday, 24 Mar 2008
|
23:21 miwi
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION
Approved by: portmgr (xorg cleanup)
|
Wednesday, 27 Feb 2008
|
01:48 alepulver
- Add patch to fix building in 5.x [1].
- Use ${LOCALBASE}/bin/gperf in dependency as that's the one passed to
configure, and it won't be installed if the base system one is found.
Reported by: pointyhat (pav, erwin) [1]
|
Saturday, 16 Feb 2008
|
17:17 alepulver
The xcb-util module provides a number of libraries which sit on top of
libxcb, the core X protocol library, and some of the extension
libraries. These experimental libraries provide convenience functions
and interfaces which make the raw X protocol more usable. Some of the
libraries also provide client-side code which is not strictly part of
the X protocol but which have traditionally been provided by Xlib.
These libraries are currently included, roughly ordered by maturity:
render-util: Convenience functions for the Render extension.
aux: Convenient access to connection setup and some core requests.
atom: Standard core X atom constants and atom caching.
property: Callback X property-change handling.
icccm: Both client and window-manager helpers for ICCCM.
keysyms: Standard X key constants and conversion to/from keycodes.
event: Callback X event handling.
image: Port of Xlib's XImage and XShmImage functions.
wm: Framework for window manager implementation.
WWW: http://xcb.freedesktop.org/
PR: ports/117236
Submitted by: Nikos Ntarmos <ntarmos at ceid.upatras.gr>
|
Number of commits found: 39 |