ngIRCd is a free, portable and lightweight Internet Relay Chat server
for small or private networks, developed under the GNU General Public
License. It is simple to configure, can cope with dynamic IP addresses,
and supports IPv6 as well as SSL. It is written from scratch and not
based on the original IRCd.
===> The following configuration options are available for ngircd-28,1:
DEBUG=off: Build with debugging support
DOCS=on: Build and/or install documentation
ICONV=on: Encoding conversion support via iconv
IDENT=off: IDENT (AUTH) protocol support
IPV6=on: IPv6 protocol support
IRCPLUS=on: IRC+ protocol
LIBWRAP=on: TCP wrapper support
PAM=on: Pluggable authentication module support
SNIFFER=off: IRC traffic sniffer
SYSLOG=on: Syslog logging support
ZLIB=on: zlib compression support
====> Secure network connection support via TLS: you can only select none or one of them
GNUTLS=off: SSL/TLS support via GnuTLS
OPENSSL=on: SSL/TLS support via OpenSSL
===> Use 'make config' to modify these settings
irc/ngircd: Install config with read permissions for group
Fixed run with default configuration after installation without the need
to manually change the permissions for the configuration file.
PR: 281538
irc/ngircd: Update 26.1 → 27, change maintainership
Changelog:
https://github.com/ngircd/ngircd/releases/tag/rel-27
Change maintainership:
* all commits from 2017 are "maintainer timeout" or "portmgr blanket":
https://cgit.freebsd.org/ports/log/irc/ngircdhttps://www.freshports.org/irc/ngircd/
* fgsch@lodoss.net - no user in bugzilla with this email
Port changes:
* Add a dedicated system user/group pair for better daemon permissions
* Move PLIST files into pkg-plist for better conditional installation
of files
* Fix installation of documentation files to %%DOCSDIR%%
* Put configuration file (and sample) into %%ETCDIR%%
* Run a --configtest before starting daemon for sanity check
* Replace PORTVERSION with DISTVERSION
* Remove GNU_CONFIGURE_MANPREFIX
* Sort options to make happy portclippy
PR: 278919
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
irc: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* A. Gabriel <backslash@BSDCode.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Alexey Mikhailov <karma@ez.pereslavl.ru>
* Alfred Perlstein <alfred@FreeBSD.org>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
* Ben Hutchinson <benhutch@xfiles.org.uk>
* Bill Fumerola <billf@chc-chimes.com>
* Chess Griffin <chess@chessgriffin.com>
* Chris Piazza <cpiazza@FreeBSD.org>
* Craig Edwards <brain@mail1.chatspike.net>
(Only the first 15 lines of the commit message are shown above )
irc/ngircd: fix misprint in DEBUG_CONFIGURE_ENABLE
No PORTREVISION bump as default build is not affected.
Reported by: Serpent7776 <serpent7776@gmail.com> via ports@
Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.
Change summary:
- Always do verbose builds for cmake, ninja and GNU configure (the
latter includes check if --disable-silent-rules is actually supported
by the configure script; there are isolated cases when it's not true)
(Only the first 15 lines of the commit message are shown above )
- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
supported by libgnutls-dane and gnutls-cli. Also clarify the option
description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4. Some ports used this library
in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed. Ports that used these have been
updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.
net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.
www/hydra: Mark BROKEN. This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.
PR: 207768
Exp-run by: antoine
Approved by: portmgr (antoine)
- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
developers)
PR: 191274
Exp-run by: antoine
Approved by: portmgr (antoine)
In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().
In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Fix a few "bad example" problems in the rc.d scripts that have been
propogated by copy and paste.
1. Primarily the "empty variable" default assignment, which is mostly
${name}_flags="", but fix a few others as well.
2. Where they are not already documented, add the existence of the _flags
(or other deleted empties) option to the comments, and in some cases add
comments from scratch.
3. Replace things that look like:
prefix=%%PREFIX%%
command=${prefix}/sbin/foo
to just use %%PREFIX%%. In many cases the $prefix variable is only used
once, and in some cases it is not used at all.
4. In a few cases remove ${name}_flags from command_args
5. Remove a long-stale comment about putting the port's rc.d script in
/etc/rc.d (which is no longer necessary).
No PORTREVISION bumps because all of these changes are noops.
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above )
