Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC. It provides PDF rendering functionality as a
shared library, and uses modern components from Freedesktop.org such as
fontconfig and cairo to take advantage of modern UNIX desktops.
graphics/poppler: update to 22.12
The latest stable release is poppler-22.12.0.tar.xz, released on
December 1, 2022:
Release 22.12.0:
core:
* Form::addFontToDefaultResources: Be stubborn in finding a
font we can use. Issue #1272
PR: 268163
Exp-run by: antoine
graphics/poppler: update to 22.10
Release 22.10.0:
core:
* SplashOutputDev::tilingPatternFill: Properly restore CTM on failure.
Issue #1292
* Protect against malformed files
* Refactor code to not use strndup
* Other small code refactoring
utils:
* pdftoppm: Avoid round-off errors when determining raster dimensions
* pdftocairo: Avoid round-off errors when determining raster dimensions
* pdftotext: Simplify memory handling
qt:
* Take into account flagNoView when getting/setting the visible status.
KDE bug #456313
build system:
* Fix sed invocation
PR: 266812
Exp-run by: antoine
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua>
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 22.04
Release 22.04.0:
core:
* Fix underline sometimes being drawn only partially
* Fix Adobe Reader not reading some of the contents we write correctly
* Fix code that workarounds some broken-ish files
* FoFiTrueType: Parse CFF2 fonts too
* FoFiTrueType: Support cmap types 2 and 13
* Fix a few small memory leaks
* code improvements
qt:
* Handle SaveAs named action
* Annotations: don't change the text color when changing the font
(Only the first 15 lines of the commit message are shown above )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
graphics/poppler: update to 21.08.0
Release 21.08.0:
core:
* Add API to allow addition and modification of outlines into a PDF
* Use additional samples to test for constant parts of an axial
gradient
* forms: Create fallback fonts for some well known font names
* Support reading the PDF Version from the Catalog
* Fix XRef::copy when there are modified objects
* Take into account that Date string may be in unicode
* JBIG2Stream: Fix regression in "Do not consider a size-0 to be an
error"
* Replace a local bubble sort implementation by std::sort
* Fix issues with malformed files
build system:
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: make boost a build-time dependency
Poppler uses Boost small-vectors for efficiency (over std::vector)
when the Splash renderer is enabled. Small-vectors are header-only,
so there is no need to depend on the whole boost-libs at runtime.
The PR asks to drop Boost entirely; we're not going to do that,
but as a build-dep it avoids installed-size bloat.
Bump PORTREVISION also of related ports to make sure they are
rebuilt; don't need to re-do all consumers because Boost was not
linked anyway.
PR: 256821
graphics/poppler: update to 20.09.0
Release 20.09.0:
core:
* Compability fix for Forms
* Fix fetching of Objects failing in some cases
* Fix clearing date in Annot setModified/setDate
* TextSelectionPainter: support glyphless fonts
* Splash: Don't try read past end of image
* avoid abort() on large memory allocation
* Fix memory leak on broken files
* Fix potential invalid memory read
* Small code improvements
qt5:
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 0.90.1
Release 0.90.1:
core:
* Fix regression on PS conversion.
Regression only happened on applications that are locale enabled
i.e. Okular but not pdftops, when using a quite new lcms and
the user locale uses , as decimal separator instead of .
* Add UTF16LE support to TextStringToUCS4.
Even if the standard clearly says it should be UTF16BE
PR: 247925
Exp-run by: antoine
graphics/poppler: update to 0.89.0
Release 0.89.0:
core:
* Add support for ResetForm action. Issue #225
* Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
* Fix exporting to PS of some files with CID fonts
* Use ICC profiles in PS output (if new enough lcms is used)
* Allow almost-singular tiling pattern matrices. Issue #894
* Fix memory leak when failing to load some fonts
* CairoOutputDev: Use stroke opacity when clipping to a stroke path
* CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190
glib:
* Add poppler_movie_get_aspect
cpp:
* Add the font infos to the text_box object
Exp-run by: antoine
PR: 246848
graphics/poppler: update to 0.87.0
Release 0.87.0:
core:
* Fix crashes due to inconsistent vtables for Clang builds
* Fix leak in broken files
* Internal code improvements
qt5:
* Add option to get form choice for export value
* ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695
glib:
* Internal code improvements
utils:
* pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest
PR: 245150
Exp-run by: antoine
graphics/poppler: update to 0.84.0
Release 0.84.0:
core:
* Fix crash when converting from Unicode to ASCII-7
* Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
* JBIG2Stream: fix potential crash in malformed documents
* JBIG2Stream: fix leak in reset() if called several times
* Internal code improvements
utils:
* pdfimages: Add error message if first page is larger then number of
pages.
* pdfinfo: Improved paper size recognition
* pdfsig: Fix exit code when dumping signatures
* pdftocairo: Error out when even/odd selects 0 pages
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 0.82.0
Release 0.82.0:
core:
* Fix not being able to open some files. Issue #832
* Fix crashes in malformed files
* Fix memory leak on broken files
* Minor performance improvements
* Minor code improvements
glib:
* Add poppler_document_new_from_bytes
* PopplerAttachment: Silence deprecation warnings for ctime/mtime
build system:
* pdf-inspector: Support builddir != srcdir
* Install Cairo* headers if Cairo has been found
Thanks to adridg@ for fixing all the fallout.
Exp-run by: antoine
PR: 241532
Approved by: gnome (kwm, implicit)
graphics/poppler: update to 0.80.0
Release 0.80.0:
core:
* Annotations: Implement support for setting a different text in the appearance
stream than the real text
* Splash: Optionally use small_vector from boost
* Fix memory leaks on broken files
* Fix abort on broken files
* Small code simplifications
* Remove USE_FIXEDPOINT support. Issue #821
qt5:
* Fix MSVC build
* Add subsitute-font information
* Fix since marker of some functions
(Only the first 15 lines of the commit message are shown above )
graphics/poppler: update to 0.75
Release 0.75.0:
core:
* Fix rendering of some annotations
* Fix crashes in broken files
* Small internal code improvements
cpp:
* Improve documentation
* tests: Add showing version information to poppler-dump
utils:
* pdfattach: new util
* pdftohtml: add -dataurls parameter
* pdftoppm: add -sep and -forcenum parameters
* pdftohtml: make singleHtml and stout not mutually exclusive
* pdfsig: fix use after free
- bump revisions of dependent ports due to shlib version change
PR: 236791
Exp-run by: antoine
Approved by: kwm (gnome)
Update poppler to 0.72
This update brings many changes
- the build system has switched to cmake
- some ports needed to be switched to use their bundled
version of poppler:
- print/tex-luatex (r487226)
- print/tex-xetex (r487226)
- editors/opeonffice-devel
- Qt4 support has been dropped
- print/frescobaldi has been removed for this reason.
- most of the added patches can be removed with the next
upgrade of the concerning port.
PR: 233452
Exp-run by: antoine
Approved by: gnome (kwm)
Differential Revision: https://reviews.freebsd.org/D17456
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
Update poppler to 0.24.4.
Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.
Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.
- Update poppler to 0.22.2.
- Bump the rest ports that depend on the poppler and poppler-qt because of
shared library version have been changed.
- Add a note in the UPDATING for require to rebuild all ports that depend
on poppler.
Submitted by: kwm (poppler* part)
Update poppler to 0.18.0.
The qt3 bindings are removed upstream.
The glib library lost the last gdk-pixbuf code. And rename it from
-gtk to -glib.
Thanks to: pav for a exp-runs
bapt for double checking the libreoffice ports
Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/
This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.
This release features commits by avl, marcus, mezz and myself.
The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:
Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX
(Only the first 15 lines of the commit message are shown above )
Presenting GNOME 2.28.1 for FreeBSD. The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.
On the FreeBSD front, though, a lot went into this release. Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration. Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.
But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.
(Only the first 15 lines of the commit message are shown above )
- Add jpeg dependency, bump the PORTREVISION on poppler, poppler-qt4 and
poppler-utils.
- Add --disable-gdk and --disable-gtk-test if it's not poppler-gtk.
- Minor clean up related w/ whitespace.
