A proprietary software which allows groups of people to speak over
the Internet. This port contains the TeamSpeak 3 server part.
No tsdns support available (yet). If you need it, extract & install yourself.
===> The following configuration options are available for teamspeak3-server-3.13.8,1:
DOCS=on: Build and/or install documentation
MYSQL=off: MySQL database support
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com>
(Only the first 15 lines of the commit message are shown above )
*/*: Remove redundant '-[0-9]*' from CONFLICTS
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".
Approved by: portmgr (blanket)
When in the serverquery, help commands
fail due to the txt's not being found.
The serverquerydocs folder needs to be
in the working directory. Added a link
to resolve this issue.
Fix issues when calling teamspeak_flags.
When calling teamspeak_flags prior to this commit,
flags would be appended to the daemon command. After
this commit, it will be appended to the teamspeak
command as one would expect.
Reported by: Oliver Lehmann <lehmann@ans^>
* Updated to 3.6.1
* Removed workaround for a fixed bug in previous 11.x release
* Reworked rc script to be more standardized
The rc script now has 3 possible entries that can be changed,
teamspeak_pidfile, teamspeak_db_dir and teamspeak_log_dir.
This will provide a more customizable experience when using
teamspeak.
Changes: https://forum.teamspeak.com/threads/138675-Release-TeamSpeak-3-Server-3-6-1
PR: 235082
Remove compatibility code for FreeBSD < 11.2 from all ports.
Simplify some ports where DragonFlyBSD no longer needs to be special-cased.
Submitted by: rene
Reviewed by: bapt, jbeich
Differential Revision: https://reviews.freebsd.org/D17724
* Added new default unset option MYSQL
If mysql is used instead of sqlite, teamspeak can fail to start because
mysql sometimes starts after teamspeak. As a fix, a new option has been
added that will add mysql to REQUIRES and set mysql server as a depend.
Reported by: Dries Michiels <driesmp@hotmail.com>
Reviewed by: lifanov (mentor)
Approved by: lifanov (mentor)
Differential Revision: https://reviews.freebsd.org/D11681
* Updated maintainer email
* Changed comment headers to match my name and FreeBSD email
Reviewed by: matthew (mentor)
Approved by: matthew (mentor)
Differential Revision: https://reviews.freebsd.org/D11466
audio/teamspeak3-server: update 3.0.13.5 -> 3.0.13.6
- Fixed virtual server stops responding to clients
- TSDNS server now also listens on ipv6 when available
- TSDNS server Documentation updated
PR: 214641
Submitted by: Ultima1252@gmail.com (maintainer)
Update to upstream version 3.0.13.4
Detailed maintainer log:
- fixed a problem where virtual servers refuse to start due to invalid flags
or order
- fixed a crash in fix crash on servergroupautodelperm /
servergroupautoaddperm
- "Error opening file: No such file or directory" message now includes
filename
- Fixed server crash when ipv6 client connects while using MariaDB (or
MySQL) server
- Database plugins are now checked more thoroughly at server startup
- To fix the problem with MariaDB, the server needs to alter columns in the
client and bindings table. For large databases, this can take a while. It
is recommended that all ts3servers that use the same database, are stopped
and then one new ts3server is started first which does the update. After
this, the other instances can be started too.
PR: 212531
Submitted by: Ultima1252@gmail.com (maintainer)
audio/teamspeak3-server: 3.0.13 -> 3.0.13.2
- fixed several vulnerabilities.
- fixed a crash introduced in 3.0.13.1
- fixed a deadlock in the server causing some instances to
hang / be unresponsive
- fixed a crash reported by a customer.
PR: 211911
Changes: http://forum.teamspeak.com/threads/126318-TeamSpeak-3-Server-3-0-13-2-released
Submitted by: Ultima1252@gmail.com (maintainer)
audio/teamspeak3-server: 3.0.12.4 -> 3.0.13
+ ipv6 support
+ improved database performance
+ improved snapshot create/deploy performance
+ Enable "tcp_nodelay" option for server query (less latency)
+ bindinglist command now has a new parameter "subsystem"
- file transfer now only accepts connections from ip addresses that
have started an upload / download. There is a reserve of 20 slots
that are allowed to connect even though that particular
ip address did not start an upload/download. This is to support
exotic client routing configurations like tcp load balancers.
- fixed incorrect filetransfer port reported in instanceinfo
- binding voice to the any address (0.0.0.0 / 0::0), which is the
default behaviour of the server, now supports clients connecting
(Only the first 15 lines of the commit message are shown above )
When there is a do-install target, do not use a post-install target, do
everything at once. Sometime, rename post-install into a options helper
target.
I did not fix ports that were such a mess that I could not figure out
what they really wanted to do. I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.
With hat: portmgr
Sponsored by: Absolight
audio/teamspeak3-server: 3.0.12.3 -> 3.0.12.4
- fixed an other server crashes on malicious input (again)
- fixed a deadlock on some query commands
PR: 209126
Submitted by: Ultima1252@gmail.com (maintainer)
Update to 3.0.12.2.
* Fixed DISTNAME
* Added tar to uses for new tar format
* Fixed WORKSRC
* Removed server query manual (No longer exists)
* Adjusted ts3 Binary name for new version
* Updated distinfo
* Adjusted rc script for binary change
* Updated pkg-plist
PR: 207430
Submitted by: Ultima <Ultima1252@gmail.com>
Approved by: hirner@bitfire.at (maintainer)
- Update to upstream version 3.0.11
- Remove invalid mirror
- gcc and libiconv dependencies not needed anymore
- WRKSRC has changed ("_" for x86, "-" for amd64)
- Correct ownership of /var/log/teamspeak
- Un-silence INSTALL*
- Remove explicit actions which are handled by ports/pkg automatically
- Display pkg-message.in
- IGNORE due to license; LICENSE_PERMS does not contain auto-accept
PR: 194282
Submitted by: hirner@bitfire.at (maintainer)
Reviewed by: riggs
Approved by: hirner@bitfire.at (maintainer)
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().
In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.
- Update to 3.0.1
- Abstract MASTER_SITES to avoid having to edit each update
- Use bsd.port.options.mk; apparently that includes ARCH
PR: ports/162666
Submitted by: Richard Hirner <hirner@bitfire.at> (maintainer)
Feature safe: yes
- Update to 3.0.0 (release numerically less than betas,
so unfortunately PORTEPOCH comes in)
- Use the LICENSE in the distfile
PR: ports/159674
Submitted by: Pavel M. <admin@onlyfriends.info>
Reviewed by: Richard Hirner <hirner@bitfire.at> (maintainer)
- Change PORTVERSION to DISTVERSION in due of package to be a release candidate
- Add package to arch amd64
- Add new doc file.
Submitted by: Richard Hirner <hirner@bitfire.at> (maintainer - via e-mail)
- Updated to 3.0.0.b30 [1]
- Over to new volunteer [1]
- Added new UID, GID, and LEGAL entries [1]
- Fixed rc.conf variable name in pkg-message
- Fixed a couple of portlint warnings
PR: ports/154453 [1]
Submitted by: Richard Hirner <hirner@bitfire.at>
Reviewed by: Chris Rees <utisoft@gmail.com>
