FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

I am looking for an LTO tape library. Do you have one to spare?
Port details
linux-eagle 4.16.2 cad Deleted on this many watch lists=4 search for ports that depend on this port
Restricted RESTRICTED: Usage permitted for non-commercial purposes only
NO CDROM NO CDROM: Sale for profit is not permitted
An easy to use, yet powerful tool for designing printed circuit boards
Was Maintained by: riggs@rrr.de search for ports maintained by this maintainer
Port Added: 26 Dec 2001 13:12:17
Also Listed In: linux
License: not specified in port


The EAGLE Layout Editor is an easy to use, yet powerful tool for designing
printed circuit boards (PCBs). The name EAGLE is an acronym, which stands for
Easily Applicable Graphical Layout Editor.

The program consists of three main modules:

o Layout Editor
o Schematic Editor
o Autorouter

which are embedded in a single user interface. Therefore there is no need for
converting netlists between schematics and layouts.

This is a Light Freeware Edition. It has the following limitations:

o The useable board area is limited to 100 x 80 mm (4 x 3.2 inches).
o Only two signal layers can be used (Top and Bottom).
o The schematic editor can only create one sheet.
o Support is only available via email or through our forum (no fax or phone
  support).
o Use is limited to non-profit applications or evaluation purposes.

Apart from these limitations the EAGLE Light Edition can do anything the
Professional Edition can do. You can even load, view and print drawings that
exceed these limits!

WWW: http://www.cadsoftusa.com
SVNWeb : Main Web Site : Distfiles Availability : PortsMon

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.

Required To Run:
  1. emulators/linux_base-fc4
  2. textproc/linux-expat
  3. x11-fonts/linux-fontconfig
  4. x11/linux-xorg-libs
There are no ports dependent upon this port

No installation instructions: this port has been deleted.

The package name of this deleted port was: linux-eagle


Configuration Options
     No options to configure

Master Sites:
  1. ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
  2. ftp://ftp.cadsoft.de/pub/program/4.16r2/

Number of commits found: 26

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
13 Nov 2010 16:46:36
Original commit files touched by this commit  4.16.2
stefan search for other commits by this committer
- Update cad/linux-eagle5 to 5.10 and transfer maintainership to submitter.
- Remove cad/linux-eagle (submitter is maintainer).
- Remove german/linux-eagle (submitter is maintainer).

PR:             151153
Submitted by:   Thomas Zander <thomas.e.zander@googlemail.com>
Approved by:    Michael Durian <durian@shadetreesoftware.com> (old maintainer)
30 Jul 2010 14:51:37
Original commit files touched by this commit  4.16.2
olgeni search for other commits by this committer
Fix a few typos in ports/cad.
19 Mar 2009 17:28:51
Original commit files touched by this commit  4.16.2
bsam search for other commits by this committer
Welcome to the new linux ports infrastructure which allows using
both current (fc4) and future linux (f8) distributions at one
ports tree.

The patch contains full changes to ports/Mk files and all ports involved.
But only infrastructure is changed. The resulting packages are the same as
before. Hence no need to bump PORTREVISIONs.

The idea was taken from bsd.gnome.mk and others.

More than 130 ports are switched to follow a new linux infrastructure
introduced by changes to bsd.port.mk, bsd.linux-rpm.mk and a new
bsd.linux-apps.mk.

Thanks for all who was involved and helped me with this work.
And help from Alexander Leidinger was incredible.

Other changes are coming. Stay tuned!

PR:             ports/132510
Submitted by:   bsam (me)
Exp-run by:     portmgr (pav)
19 Apr 2008 00:40:54
Original commit files touched by this commit  4.16.2
edwin search for other commits by this committer
Use @rmtry macro in the pkg-plist.
06 Jul 2007 10:22:43
Original commit files touched by this commit  4.16.2
miwi search for other commits by this committer
- Update to 4.16r2
- Allow build with amd64

PR:             113871
Submitted by:   Thomas Zander <riggs@rrr.de> (maintainer)
05 Aug 2006 20:16:32
Original commit files touched by this commit  4.16_1
itetcu search for other commits by this committer
Depend on linux-xorg libs, reported by Brian Josefsen <bj@cold.dk>

PR:             ports/101227
Submitted by:   Thomas E. Zander (maintainer)
02 Feb 2006 14:18:46
Original commit files touched by this commit  4.16
barner search for other commits by this committer
- Update to 4.16 [1]
- Use foo-[0-9]* for CONFLICTS

Submitted by:   "Thomas E. Zander" <riggs@rrr.de> (maintainer)
PR:             ports/92575
22 Jan 2006 08:20:48
Original commit files touched by this commit  4.15
edwin search for other commits by this committer
SHA256ify

Approved by:    krion@
26 Sep 2005 11:24:54
Original commit files touched by this commit  4.15
barner search for other commits by this committer
Update to 4.15

Submitted by:   Mike Durian <durian@shadetreesoftware.com>
PR:             ports/86241
Approved by:    "Thomas E. Zander" <riggs@rrr.de> (maintainer)
17 Jun 2005 22:59:29
Original commit files touched by this commit  4.13_1
netchild search for other commits by this committer
Mega-patch to cleanup the ports infrastructure regarding our linux bits:
  - USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
    tools to strip binaries anymore, so it's not neccesary anymore to override
    STRIP and STRIP_CMD.
  - USE_LINUX_PREFIX implies NO_MTREE now.
  - In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
    instead upon the native FreeBSD libraries.
  - The variable LINUX_BASE_PORT contains a string which is suitable as an
    item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
    default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
    instead of a hardcoded reference.
  - Change all ports to comply to the "new world order".
  - The Ports Collection now allows to override the default linux_base port.
    Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
    ${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
(Only the first 15 lines of the commit message are shown above View all of this commit message)
01 Mar 2005 21:51:49
Original commit files touched by this commit  4.13_1
trevor search for other commits by this committer
Respect the user's USE_LINUX setting.
31 Dec 2004 18:24:10
Original commit files touched by this commit  4.13_1
netchild search for other commits by this committer
Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.

It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).

This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).

Changes:
 - change the default linux_base from v7 to v8
 - add a newer freetype to linux_base-8 for nicer fonts display [1]
 - don't let cpio use hardlinks in the linux_base-8 port to quiet some
(Only the first 15 lines of the commit message are shown above View all of this commit message)
13 Dec 2004 10:16:37
Original commit files touched by this commit  4.13
vs search for other commits by this committer
Update to 4.13

PR:             ports/74539
Submitted by:   Frank Mayhar
Approved by:    maintainer
31 Mar 2004 03:12:58
Original commit files touched by this commit  4.11
trevor search for other commits by this committer
SIZEify (maintainer timeout)
13 Nov 2003 14:45:08
Original commit files touched by this commit  4.11
trevor search for other commits by this committer
Use the FIND and XARGS macros introduced in bsd.port.mk 1.391.
14 Oct 2003 11:18:01
Original commit files touched by this commit  4.11
daichi search for other commits by this committer
update cad/linux-eagle: 4.09r2 -> 4.11

PR:             57853
Submitted by:   Thomas E. Zander <riggs@rrr.de> (maintainer)
23 Feb 2003 23:05:19
Original commit files touched by this commit  4.09.2_2
edwin search for other commits by this committer
Maintainer-update of cad/linux-eagle

        The new install routine installs directories without user
        access bits set.

PR:             ports/48184
Submitted by:   Thomas E. Zander <riggs@mugiri-in-au.dyndns.tv>
21 Feb 2003 11:04:55
Original commit files touched by this commit  4.09.2_1
knu search for other commits by this committer
De-pkg-comment.
27 Jan 2003 15:38:44
Original commit files touched by this commit  4.09.2_1
arved search for other commits by this committer
Use cpio instead of tar to fix permission problems.
Remove a file from pkg-plist. Bump PORTREVISION

PR:             47532
Submitted by:   Thomas E. Zander <riggs@hadiko.de>
19 Sep 2002 15:14:33
Original commit files touched by this commit  4.09.2
obraun search for other commits by this committer
* Make german/linux-eagle slave port of cad/linux-eagle.
* Use german distfile for german/linux-eagle.
* Fix pkg-plist for german/linux-eagle.
* Use german website in german/linux-eagle.

Submitted by:   maintainer
27 Aug 2002 16:09:33
Original commit files touched by this commit  4.09.2
lioux search for other commits by this committer
Assign maintainership to "Thomas E. Zander" <riggs@rrr.de> per
request
20 Aug 2002 17:31:09
Original commit files touched by this commit  4.09.2
lioux search for other commits by this committer
Update to 4.09r2

PR:             41614
Submitted by:   Thomas E. Zander <riggs@hadiko.de>
03 Aug 2002 10:57:04
Original commit files touched by this commit  4.09.1
mita search for other commits by this committer
A trivial modification.  ${LINUXBASE}/lib/ld.so, referenced in Makefile,
no more exsists in the new linux_base (7.1) whereas it existed for
linux_base-6.1.
22 May 2002 11:34:42
Original commit files touched by this commit  4.09.1
sobomax search for other commits by this committer
Update to 4.09r1.

PR:             37898
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>
29 Dec 2001 10:25:54
files touched by this commit
sobomax search for other commits by this committer
Add message explaining that after installation the user have to run the program 
 as root in order to create registration key in ${DATADIR}.    
26 Dec 2001 16:12:17
files touched by this commit
sobomax search for other commits by this committer
Add linux-eagle , an easy to use, yet powerful tool for designing   printed
circuit boards.    

Number of commits found: 26

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
chromiumAug 26
fileAug 21
py-djangoAug 21
py-django-develAug 21
py-django14Aug 21
py-django15Aug 21
php53Aug 18
phpmyadminAug 17
chromiumAug 13
serfAug 11
subversionAug 11
subversion17Aug 11
nginxAug 09
nginx-develAug 09
mingw32-opensslAug 06

6 vulnerabilities affecting 9 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds


Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24520
Broken 217
Deprecated 721
Ignore 561
Forbidden 36
Restricted 261
No CDROM 101
Vulnerable 23
Expired 1
Set to expire 711
Interactive 0
new 24 hours 11
new 48 hours17
new 7 days61
new fortnight98
new month264

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.