Number of commits found: 53

Remove CMAKE_USE_PTHREAD from the ports using it.

This setting has not had any effect since r1.13 to bsd.cmake.mk, as it
was only useful when we supported FreeBSD < 7.

Approved by:    avilla (mentor), portmgr (miwi)
Feature safe:   yes

Bump PORTREVISION after open-mofit update

- chase exiv2 library bump
- while here remove some MD5
- fix some forgottern desktop-file-utils dependencies

Fix graphics/hugin pkg-plist

Feature safe:   yes

Upgrade graphics/hugin from 2009.4.0 to 2010.4.0

* WX Unicode is now required to build Hugin
* Remove the requirement for GCC 4.2 on 6.x since Hugin does not do
  RPATH_REMOVE anymore (see the log message for graphics/hugin/Makefile,
  rev 1.43)

Chase exiv2 shlib bump.

Change dependency from boost-python back to boost-libs.

PR:             ports/147801
Submitted by:   makc@
Approved by:    vd@ (maintainer timeout two weeks)
Feature safe:   yes

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- Add glew to the list of supported USE_GL variables
- Patch ports depending on GLEW directly

Approved by:    portmgr (pav)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

The error with GCC 4.4:

  /libexec/ld-elf.so.1: /usr/lib/libstdc++.so.6: version GLIBCXX_3.4.11 required
by /usr/local/bin/hugin not found

which I just fixed by using an older GCC is because
hugin-2009.4.0/src/hugin1/hugin/cmake_install.cmake includes this code:

    FILE(RPATH_REMOVE
         FILE "$ENV{DESTDIR}${CMAKE_INSTALL_PREFIX}/bin/hugin")

which does remove the rpath setting -Wl,rpath=/usr/local/lib/gcc44 which was
injected by /usr/ports/Mk/bsd.gcc.mk and then /usr/lib/libstdc++.so.6 is
picked up instead of /usr/local/lib/gcc44/libstdc++.so.6

If we have to compile with GCC 4.4 some day, then we will have to

(Only the first 15 lines of the commit message are shown above )

Use ${OSVERSION} after including bsd.port.pre.mk

Feature safe:   yes

graphics/hugin:

The compilation is known to fail on 6.x with GCC 3.4, so
use non-standard GCC (4.4+) only on 6.x and older.

On 7.x and above use the base GCC instead of GCC 4.4+ because:
1. GCC 4.4+ is not needed anyway and
2. The hugin executable compiled on 8.0/gcc-4.4.4.20100216 fails to start:

  /libexec/ld-elf.so.1: /usr/lib/libstdc++.so.6: version GLIBCXX_3.4.11 required
by /usr/local/bin/hugin not found

Reported by:    Hannes Hauswedell <h2@fsfe.org>
Feature safe:   yes

- update to jpeg-8

graphics/hugin: Use GCC 4.4 or higher

The compilation fails on 6.x with GCC 3.4:

...
[ 11%] Building CXX object
src/hugin_base/CMakeFiles/huginbase.dir/algorithms/nona/NonaFileStitcher.cpp.o
cd /work/a/ports/graphics/hugin/work/hugin-2009.4.0/src/hugin_base &&
/usr/bin/c++   -Dhuginbase_EXPORTS -O2 -fno-strict-aliasing -pipe -O2 -g -fPIC
-I/work/a/ports/graphics/hugin/work/hugin-2009.4.0/src
-I/work/a/ports/graphics/hugin/work/hugin-2009.4.0/src/hugin_base
-I/work/a/ports/graphics/hugin/work/hugin-2009.4.0/src/foreign
-I/work/a/ports/graphics/hugin/work/hugin-2009.4.0/src/foreign/vigra
-I/work/a/ports/graphics/hugin/work/hugin-2009.4.0/src/celeste
-I/usr/local/include -I/usr/local/include/OpenEXR -o
CMakeFiles/huginbase.dir/algorithms/nona/NonaFileStitcher.cpp.o -c
/work/a/ports/graphics/hugin/work/hugin-2009.4.0/src/hugin_base/algorithms/nona/NonaFileStitcher.cpp
In file included from /usr/local/include/boost/thread/future.hpp:12,
                 from /usr/local/include/boost/thread.hpp:24,
                 from
/work/a/ports/graphics/hugin/work/hugin-2009.4.0/src/hugin_base/vigra_ext/MultiThreadOperations.h:30,
                 from
/work/a/ports/graphics/hugin/work/hugin-2009.4.0/src/hugin_base/vigra_ext/ImageTransforms.h:42,
                 from
/work/a/ports/graphics/hugin/work/hugin-2009.4.0/src/hugin_base/nona/Stitcher.h:49,
                 from
/work/a/ports/graphics/hugin/work/hugin-2009.4.0/src/hugin_base/algorithms/nona/NonaFileStitcher.cpp:33:
/usr/local/include/boost/exception_ptr.hpp:43: error: looser throw specifier for
`virtual boost::exception_ptr::~exception_ptr()'
/usr/local/include/boost/exception/detail/exception_ptr_base.hpp:27: error:  
overriding `virtual
boost::exception_detail::exception_ptr_base::~exception_ptr_base() throw ()'
*** Error code 1
...

Reported by:    pav

Upgrade graphics/hugin from 2009.2.0 to 2009.4.0.

Release notes:
http://hugin.sourceforge.net/releases/2009.4.0/en.shtml

ChangeLog:
http://hugin.svn.sourceforge.net/viewvc/hugin/hugin/trunk/ChangeLog

- Fix build - switch dependency to boost-python-libs

Reported by:    pointyhat

graphics/hugin:

Add missing dependencies that were added in the latest release.

Reported by:    erwin@, pav@

graphics/hugin:

Chase a distfile that has been moved.

Pointed by:     QAT@
Feature safe:   yes

Upgrade graphics/hugin from 0.8.0 to 2009.2.0.

Release notes:
http://hugin.sourceforge.net/releases/2009.2.0/en.shtml

ChangeLog:
http://hugin.svn.sourceforge.net/viewvc/hugin/hugin/trunk/ChangeLog

Feature safe:   yes

graphics/hugin:

Get rid of the idea to add lapack dependency.
Bruno Postle says it is not needed.

Upgrade graphics/hugin from 0.7.0 to 0.8.0.

Release notes:
http://hugin.sourceforge.net/releases/0.8.0/en.shtml

ChangeLog:
http://hugin.svn.sourceforge.net/viewvc/hugin/hugin/trunk/ChangeLog

- Switch SourceForge ports to the new File Release System: categories starting
with G

- Update boost to 1.39
- Split boost port to separate components, with boost-all metaport

PR:             ports/137054
Submitted by:   Alexander Churanov <churanov.port.maintainer@gmail.com>
(maintainer)

- update to jpeg7
Tested by:      pav on pointyhat

bump PORTREVISION after cmake update

. update graphics/exiv2 to the new version;
. bump ports which depends upon libexiv2.so
  (the library was bumpted from *.so.3 to *.so.7);
. mark current graphics/py-exiv2 as broken since it doesn't compile
  with new libexiv2; this should change with graphics/py-exiv2-0.2.

PR:             ports/131376
Submitted by:   bsam (me)
Discussed with: kde@
Approved by:    maintainer timeout (5 weeks)

Upgrade graphics/hugin from 0.7.r3135 to 0.7.0.

Upgrade graphics/hugin from 0.7_beta4 to 0.7.r3135 (SVN revision 3135).

This version is not archived by the authors, so this is a
snapshot of the SVN repository as of revision 3135.

The archive is put on the freebsd.org cluster.

graphics/hugin:

Fix reference to autopano-complete - it is installed as autopano-complete,
not autopano-complete.sh and does not recognize long options under FreeBSD.

PR:             ports/123588
Submitted by:   marck

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Hugin does not work with wxgtk 2.8. It crashes at startup, after displaying
the startup tip. This has been reported in ports/118190 and ports/119866.

So limit the WX dependency to 2.6 only.

* Upgrade graphics/hugin from 0.6.1 to 0.7.b4
* Update libpano dependency to libpano13
* Add OPTIONS to depend on enblend, autopano-sift and ptstitcher
* Update automake dependency to 1.10
* Get rid of the autotools hack in pre-configure:, not necessary anymore
* Sync pkg-plist
* Sync the patches in files/

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Allow the execution of gettextize because the present gettext infrastructure
does not work with the new gettext version.

Unfortunately gettextize is interactive (it just wants one to hit enter)
and there seems no way to circumvent this, so I set IS_INTERACTIVE=yes
(it does ``read dummy < /dev/tty''!)

Adopt graphics/hugin and related ports.

Reset cartola@openit.com.br due to maintainer-timeouts and no response
to previous email.

Hat:            portmgr

Update graphics/hugin from 0.5 to 0.6.1:
* Change dependency on libpano12 >= 2.8.4
* Hook dependencies on the autotools, we need to recreate the
  autogenerated files because now we have changed the autotools source
  config files (configure.ac etc.) with the hope that our changes will
  be propagated upstream

PR:             ports/108266
Submitted by:   vd
Approved by:    cartola@openit.com.br (maintainer timeout)

- Use features of bsd.wx.mk, especially USE_WX

PR:             ports/101613
Submitted by:   alepulver

- Update to 0.5
- Use DATADIR
- Respect WITHOUT_NLS
- Require wxgtk26 instead wxgtk24 and patch to use wxrc-gtk2-2.6
- Unbreak

PR:             ports/90619
Submitted by:   Marco Molteni <molter@tin.it>
Reworked by:    garga
Approved by:    maintainer

BROKEN: Does not compile

Bump PORTREVISION to chase the glib20 shared library update.

- Fix build on RELENG_4.
- Fix dependencies on wxgtk (include lib versions, otherwise
wxgtk2 2.6.x libarries could match)
- Bump PORTREVISION.

Approved by:    portmgr

- Fix pkg-plist.
- Bump PORTREVISION.

Approved by:    portmgr

Fix the build (wx-config has different name now). Maintainer timeout.

Pointy hat to:  fjoe

Finish repo copy of wxgtk 2.4.2 ports to wxgtk24*

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Bump PORTREVISION to chase the glib20 shared lib version change.

- Update to 0.5 beta2

PR:             ports/78350
Submitted by:   Marco Molteni <molter@tin.it>
Approved by:    Carlos Eduardo <cartola@openit.com.br> (maintainer)

Add use_imake to get makedepend

Noticed by: pointyhat / kris

New port: graphics/hugin - a gui system to mount panoramic images
from individual pictures

        Goal: an easy to use cross-platform GUI for Panorama Tools.

        With hugin you can assemble a mosiac of photographs into a
        complete immersive panorama, stitch any series of overlapping
        pictures and much more.

        WWW: http://hugin.sourceforge.net/

PR:             ports/71849
Submitted by:   Carlos Eduardo G. Carvalho <cartola@openit.com.br>

Number of commits found: 53

15 vulnerabilities affecting 34 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities