KDE provides an integrated X11 based environment, much like CDE.
This particular port installs the graphics and image manipulation
components of KDE3.
WWW: http://www.kde.org/
===> The following configuration options are available for kdegraphics-3.5.10_11:
GPHOTO2=off: Enable support for digital cameras
IMLIB2=off: Build Kuickshow, a fast and versatile image viewer
SANE=off: Build Kooka, a SANE scanner frontend for KDE
===> Use 'make config' to modify these settings
KDE3 and QT3 expired on 2013-07-01, remove these ports.
Unfortunately, this also affects some ports using QT3 as a GUI toolkit.
Changes to infrastructure files:
- bsd.kde.mk : obsolete, remove
- bsd.qt.mk : note that a CONFLICTS_BUILD line can probably go after a while
- CHANGES : document the removals from bsd.port.mk
- KNOBS : remove KDE and QT (KDE4 and QT4 should be used instead)
- MOVED : add the removed ports
PR: ports/180745
Submitted by: rene
Approved by: portmgr (bapt)
Exp-run by: bapt
Rectify USE_TEX to support both of teTeX and TeXLive.
TEX_DEFAULT:
A knob to choose teTeX or TeXLive. One can specify in /etc/make.conf.
USE_TEX:
A knob for port developers. Valid keywords are listed in
bsd.tex.mk.
- Deprecate QT3, KDE3 and unmaintained ports depending on them. QT 3.3.8
was released in 2007 and KDE 3.5.10 in 2008 and both are no longer
maintained upstream nor in our tree.
- Set EXPIRATION_DATE to 2013-07-01
Discussed with: bapt, tabthorpe
Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.
Bump all ports that directly depend on libglut because of the shlib version
change.
There are some extra items in this patch.
*) Because freeglut doesn't have the same dependancies as libglut, some ports
need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
remains now.
*) While here fix a png related build issue games/vegastrike.
Thanks to miwi for running the exp-run.
Approved by: portmgr (miwi)
Collaboration with: zeising@
Obtained from: xorg-dev staging area.
Update poppler to 0.18.0.
The qt3 bindings are removed upstream.
The glib library lost the last gdk-pixbuf code. And rename it from
-gtk to -glib.
Thanks to: pav for a exp-runs
bapt for double checking the libreoffice ports
Reset maintainership de jure. In fact KDE 3 has not been maintained by our team
for a long time, not to mention upstream.
Discussed a while ago among the KDE/FreeBSD team.
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Chase graphics/poppler update, bump PORTREVISION [1].
Mark MAKE_JOBS_SAFE, minor clean-ups.
Noticed by: Jan Henrik Sylvester (via kde@freebsd maillist) [1].
- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
The KDE FreeBSD team is proud to announce the release
of KDE 3.5.10 for FreeBSD. The official KDE 3.5.10 release
notes can be found at:
http://www.kde.org/announcements/announce-3.5.10.php
While not a very exciting release in terms of features,
3.5.10 brings a couple of nice bugfixes and translation
updates to those who choose to stay with KDE 3.5. The
fixes are thinly spread across KPDF with a number of crash
fixes, KGPG and probably most interesting various fixes
in kicker, KDE3's panel:
* Improved visibility on transparent backgrounds
* Themed arrow buttons in applets that were missing them
* Layout and antialiasing fixes in various applets
Approved by: portmgr (erwin/pav)
The KDE FreeBSD team is proud to announce the release
of KDE 3.5.9 for FreeBSD. The official KDE 3.5.9 release
notes can be found at:
http://www.kde.org/announcements/announce-3.5.9.php
After the KDE 4.1.0 import the team found time to make
KDE 3.5.9 ready for the Ports tree.
KDE 3.5.9 was released six months ago and 3.5.10 is coming
soon. We are not sure we have time to get 3.5.10 for FreeBSD
7.1/6.4 release, but we would have minimum 3.5.9 for those
people who prefer to stay with KDE3.
Of course Thanks to all Testers.
Even thought if poppler-qt doesn't has shared library version change, but these
ports also linking to poppler. The poppler is the one that has shared library
version change. Therefore, bump the PORTREVISION.
Reported by: Jan Henrik Sylvester <me@janh.de>
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
No KDE release without an xpdf-inherited security issue.
Security: CVE-2006-0301,
http://www.kde.org/info/security/advisory-20060202-1.txt
kpdf, the KDE pdf viewer, shares code with xpdf. xpdf contains
a heap based buffer overflow in the splash rasterizer engine that
can crash kpdf or even execute arbitrary code.
- Update graphics/libglut to 6.4.1.
- Shared lib version and PORTREVISION bumb for all affected ports.
While I'm here:
- Remove USE_MESA knob where it was (35 ports).
It marked as depricated for 2 years.
PR: ports/90247
Submitted by: Ermal Lu?i <eri--@albabsd.org>
Patch security issues in imported xpdf code.
Security: CAN-2005-3193
Security: http://www.kde.org/info/security/advisory-20051207-1.txt
Security: kpdf, the KDE pdf viewer and KOffice' pdf filter share code with
xpdf. xpdf contains multiple integer overflow vulnerabilities that
allow specially crafted pdf files, when opened, to overflow a heap
allocated buffer and execute arbitrary code.
Factor out all but one of the build switches of the KDE main module ports
into separate ports. The OPTIONS will remain as of yet and trigger dependencies
now, for easy transition.
Update KOffice to version 1.3.2.
Add patches to fix a number of issues, including:
- fix kxkb on Xorg
- fix kdemultimedia WITH_MPEGLIB (now mpeglib_artsplug) compilation on gcc 3.4.2
with optimizations greater than -O
Add security related patches and entries to portaudit.txt.
Add a patch that fixes a crashbug in kghostview. Bump PORTREVISION.
Noticed by: Arjan van Leeuwen <avleeuwen@piwebs.com>,
Kay Lehmann <kay_lehmann@web.de>
Update to KDE 3.2.1 / QT 3.3.1
Important changes:
==================
KDE:
- Audio/arts does not install artswrapper anymore, instead it is provided by
audio/artswrapper. See UPDATING.
- misc/kdeaddons3 is now a metaport with
editors/kate-plugins
editors/vimpart
games/atlantikdesigner
(Only the first 15 lines of the commit message are shown above )
Update to KDE 3.2.0
Important changes:
==================
- Kmail and knode have been moved from kdenetwork to kdepim. This
means you will have to install kdepim if you want to continue using
kmail or knode. This is to ease integration with korganizer, in
the new 'Kontact' application.
- The arabic translations for KDE and KOffice have been moved from
misc to the arabic category.
- There is a new module called kdeaccessibility in the accessibility
category. It contains a few utilities for disabled users like a
magnification lens and a text-to-speech frontend.
- In KDM, you need to select the 'CUSTOM' session profile in order
to have your .xsession executed. This is particularly important if
you're using the aegypten tools
(http://freebsd.kde.org/howtos/aegypten-kmail.php).
- We have started making more parts of the ports optional. In kdepim,
both Kandy and KPilot can be turned off with ports-knobs. This
process will continue in the 3.2 series.
Fix the -pthread problem in case the option gets removed again. This
patch involved patching the core auto* routines in KDE to accept the
PTHREAD_* variables in the environment, with fallbacks. We decided the
easiest way to implement this in ports was to generate configure instead
of risking incorrect generation at port configure time.
Said patch has already been committed to HEAD in KDE and as such will be
removed with the 3.2 upgrade once it is released.
Ports using Makefile.kde that shouldn't be using them (i.e. non-KDE
modules) have this support commented out due to lack of patch.
Helped out: Adriaan de Groot <adridg@cs.kun.nl>
Lauri Watts <lauri@kde.org>
Andy Fawcett <andy@athame.co.uk>
Update KDE to the latest official release, KDE 3.1.3
Official KDE 3.1.3 announcement:
http://www.kde.org/announcements/announce-3.1.3.php
(may not work until a few hours after this commit - we jumped the gun a little
in order to have the update in place at the time the security notifications for
KDE 3.1.2 will be released together with the announcement of KDE 3.1.3).
Changelog from 3.1.2 to 3.1.3 release:
http://www.kde.org/announcements/changelogs/changelog3_1_2to3_1_3.php
Thanks and credits need to go to the whole KDE-FreeBSD team, as well
as everyone on kde@freebsd.org for providing feedback, reporting bugs
and just using the KDE ports.
Approved by: will (real mentor asleep)
Upgrade to 3.1.1a to handle PS/PDF security advisory. There are additional
patches to kgv which are also included in this commit.
Submitted by: Lauri Watts <lauri@kde.org>
1. Removed comments from pkg-plist files per will's request.
2. This completes the KDE 3.0.4 commit. It's here, folks! Now /. those
cvsup servers (in about an hour or so)!
Update to 3.0.3. Not much changed here: [1] i18n PKGNAMEs converted to
more closely conform to FreeBSD style etc, and Konqueror SSL patch merged.
Tested by: Matt Douhan <matt@fruitsalad.org>, alane
Submitted by: lioux [1]
1, Restored kamera with a WITH_GPHOTO2 knob that works like the WITH_SANE knob.
That is, it looks for gphoto2-config.
2, pkg-plist changes to go with (1).
3. Changed WITH_SANE= to WITH_SANE?= (and WITH_GPHOTO2 is the same) so that
even if the package is installed you can build kdegraphics without it by
using WITH_SANE=no and/or WITH_GPHOTO2=no.
4. No PR, just request on list and it seemed reasonable.
Upgrade to KDE 3.0.1. The delay in this upgrade is mainly due to the
rigorous testing performed on the part of the KDE/FreeBSD Project
over the last three weeks. Thanks to everyone who helped test!
General changes:
[1] Follow KDE2 style by moving KDE core specific macros and
the like to x11/kde3/Makefile.kde.
[2] Fix a variety of comments or miscellaneous data to reflect
that this is KDE3 and not KDE2.
[3] Account for more empty directories in the PLISTs.
deskutils/kdepim3:
[4] More #include <malloc.h> -> #include <stdlib.h>.
audio/arts:
(Only the first 15 lines of the commit message are shown above )
