FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

I am looking for an LTO tape library. Do you have one to spare?
Port details
python-doc-text Documentation for the Python programming language
2.7.8 lang on this many watch lists=0 search for ports that depend on this port
Maintained by: python@FreeBSD.org search for ports maintained by this maintainer
Port Added: 18 Jun 2011 18:57:10
Also Listed In: python
License: not specified in port


Documentation for the Python programming language.

WWW: http://www.python.org/doc/
SVNWeb : Main Web Site : Distfiles Availability : PortsMon
Master port: lang/python-doc-html

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Required To Build:
  1. lang/python27
There are no ports dependent upon this port

To install the port: cd /usr/ports/lang/python-doc-text/ && make install clean
To add the package: pkg install lang/python-doc-text


Configuration Options
     No options to configure

Master Sites:
  1. http://distcache.FreeBSD.org/ports-distfiles/python/
  2. http://www.python.org/ftp/python/doc/2.7.8/
  3. http://www.python.org/ftp/python/doc/current/
Notes from UPDATING
These upgrade notes are taken from /usr/ports/UPDATING
  • 2013-10-03
    Affects: users of lang/python* and ports
    Author: mva@FreeBSD.org
    Reason: 
      The default versions of lang/python* have been changed to support the
      new DEFAULT_VERSIONS variable.
    
      PYTHON_DEFAULT_VERSION, PYTHON2_DEFAULT_VERSION and
      PYTHON3_DEFAULT_VERSION are deprecated. If you have set them in your
      make.conf, you should change them something like
    
      DEFAULT_VERSIONS=python=2.7 python2=2.7 python3=3.3
    
    
  • 2013-08-17
    Affects: users of lang/python*
    Author: mva@FreeBSD.org
    Reason: 
      The lang/python* ports do not install links to 2to3, idle, pydoc, python
      and other binaries anymore. Those were moved into the lang/python2 and
      lang/python3 ports respectively. This change brings us closer to the goal
      of making Python ports usable with different Python versions at the same
      time.
    
      If you have lang/python2* or lang/python3* installed, please also install
      the associated lang/python2 or lang/python3 port.
    
      1. update lang/python2* and/or lang/python3*
      2. install lang/python2 and/or lang/python3
      3. install/update lang/python
    
    
  • 2011-09-25
    Affects: users of lang/python*
    Author: lwhsu@FreeBSD.org
    Reason: 
      The HUGE_STACK_SIZE option has been removed, now Python will use default
      thread stack size of the system.  If you want to change it, specify it
      with -DTHREAD_STACK_SIZE=<size> in CFLAGS.
    
    
  • 2011-03-04
    Affects: users of lang/python* and py-*
    Author: miwi@FreeBSD.org
    Reason: 
      The default version of Python has been changed from 2.6.x to 2.7.x.
      If you have 2.6.x installed, perform an upgrade of lang/python26 to
      lang/python27 with one of the following commands:
    
      If using portupgrade:
      # portupgrade -o lang/python27 lang/python26
    
      If using portmaster:
      # portmaster -o lang/python27 lang/python26
    
      If you want to retain 2.6.x as default Python version, set the
      PYTHON_DEFAULT_VERSION variable to 'python2.6' (without quotes) in
      /etc/make.conf, then go to lang/python and perform the following
      command:
    
      # portupgrade -R python
    
      Once the installed Python has been updated to 2.7, by using the
      method above, it is required to run the upgrade-site-packages target in
      lang/python to assure that site-packages are made available to the new
      Python version.
    
      If using portupgrade:
      # cd /usr/ports/lang/python && make upgrade-site-packages
    
      If using portmaster:
      # cd /usr/ports/lang/python && make upgrade-site-packages -DUSE_PORTMASTER
    
      The portmaster case can take quite some time to complete due to the lack of
      cached information that the portupgrade suite uses (specifically pkg_which).
      This is not the fault of portmaster.
    
    
  • 2009-06-08
    Affects: users of lang/python* and py-*
    Author: miwi@FreeBSD.org
    Reason: 
      The default version of Python has been changed from 2.5.x to 2.6.x.
      If you have 2.5.x installed, perform an upgrade of lang/python25 to
      lang/python26 with one of the following commands:
    
      If using portupgrade:
      # portupgrade -o lang/python26 lang/python25
    
      If using portmaster:
      # portmaster -o lang/python26 lang/python25
    
      If you want to retain 2.5.x as default Python version, set the
      PYTHON_DEFAULT_VERSION variable to 'python2.5' (without quotes) in
      /etc/make.conf, then go to lang/python and perform the following
      command:
    
      # portupgrade -R python
    
      Once the installed Python has been updated to 2.6, by using the
      method above, it is required to run the upgrade-site-packages target in
      lang/python to assure that site-packages are made available to the new
      Python version.
    
      If using portupgrade:
      # cd /usr/ports/lang/python && make upgrade-site-packages
    
      If using portmaster:
      # cd /usr/ports/lang/python && make upgrade-site-packages -DUSE_PORTMASTER
    
      The portmaster case can take quite some time to complete due to the lack of
      cached information that the portupgrade suite uses (specifically pkg_which).
      This is not the fault of portmaster.
    
    

Number of commits found: 4

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
16 Jan 2014 20:17:54
Original commit files touched by this commit  2.7.6
Revision:339975
rm search for other commits by this committer
- mark stage-safe
20 Sep 2013 19:53:10
Original commit files touched by this commit  2.7.5
Revision:327741
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
lang)
11 May 2013 11:37:55
Original commit files touched by this commit  2.7.3
Revision:317865
rm search for other commits by this committer
Commit all the non-functional changes to python ports to reduce the diff size
for an exp-run of updated python versions.

- trim Makefile headers
- remove leading indefinite article from COMMENT
- use PYTHON shortcut in MASTER_SITES
- whitespace fixes
- remove checks for unsupported versions of FreeBSD
- use static value ``33'' instead of PYTHON_SUFFIX in lang/python33/pkg-plist,
  because this value is not supposed to be changed across the branch and for
  consistency with other python3 ports
- remove conflicts in lang/python-mode.el with not more existing python-2.4
18 Jun 2011 18:56:38
Original commit files touched by this commit  2.7.1
ohauer search for other commits by this committer
 - Documentation for the Python programming language in txt format

PR:             ports/152186
Submitted by:   John Hein <jhein _at_ symmetricom.com>

Number of commits found: 4

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
asterisk11Nov 21
asterisk11Nov 21
phpmyadminNov 21
kde4-runtimeNov 20
kwebkitpartNov 20
yiiNov 19
chromiumNov 18
kde4-workspaceNov 17
dbusNov 11
wgetNov 08
konversation-kde4Nov 05
jenkinsOct 31
jenkins-ltsOct 31
twikiOct 31
libsshOct 29

9 vulnerabilities affecting 11 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds


Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24396
Broken 106
Deprecated 39
Ignore 364
Forbidden 1
Restricted 206
No CDROM 93
Vulnerable 18
Expired 0
Set to expire 35
Interactive 0
new 24 hours 6
new 48 hours14
new 7 days131
new fortnight155
new month202

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.