lang/yabasic: Move man pages to share/man

Approved by:	portmgr (blanket)

lang/yabasic: Update to 2.90.4

lang/yabasic: Update to 2.90.3

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

lang: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>

devel/libffi: Bump deps PORTREVISION for shlib change

PR:		263764
Reported by:	VVD <vvd@unislabs.com>

lang/yabasic: Update to 2.90.2

lang/yabasic: Add CPE information

Approved by:    portmgr (blanket)

lang/yabasic: Update to 2.90.1

Remove # $FreeBSD$ from Makefiles.

- Update to 2.89.1

- Update to 2.89.0

- Update to 2.87.1

- Update to 2.87.0

Chanse update of devel/libffi

Chase the devel/libffi update
Bump portrevision of all dependent ports to chace shard library version bump
in libffi.
Update LIB_DEPENDS lines where needed to not require a specific version of
libffi.so.

PR:		247028 (for tracking)

- Update to 2.86.9

- Update to 2.86.8

- Update to 2.86.6

- Update to 2.86.4

- Update to 2.86.3

- Update to 2.86.2

- Update to 2.86.0

Clean up WRKSRC and USE_GITHUB usage in some ports

Add USES=xorg USES=gl, ports categories l

Add USES=xorg and USES=gl to ports in categories starting with 'l'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

- Update to 2.84.2

- Update to 2.84.1

- Update to 2.83.1

- Update to 2.83.0

- Update to 2.82.1

- Update to 2.82.0

- Update to 2.81.1

- Update to 2.80.0

- Update to 2.79.0

- Update to 2.78.5

- Update to 2.78.4

- Update to 2.78.3

- Update to 2.78.2 from 2.769 and bump PORTEPOCH
- Update LICENSE
- Take maintainership

- Switch to new test framework
- Switch to options helpers

Cleanup BROKEN/IGNORE for 10.3-

Sponsored by:	Absolight

- Update to 2.769

PR:		203800
Submitted by:	tkato432@yahoo.com

- Mark BROKEN on < 10.x amd64:

/usr/bin/make  check-TESTS
Segmentation fault (core dumped)
FAIL: tests/simple.yab
Segmentation fault (core dumped)
FAIL: tests/grammar.yab
Segmentation fault (core dumped)
FAIL: tests/io.yab
Segmentation fault (core dumped)
FAIL: tests/bugs.yab
Segmentation fault (core dumped)
FAIL: tests/break.yab
===================
5 of 5 tests failed
===================
*** [check-TESTS] Error code 1

MFH:		2015Q2

- Update to version 2.768; canonicalize Makefile header
- Add LICENSE knob (ART10 GPLv2; multi)
- Drop unneeded "xt" from USE_XORG and adjust its position
- Improve test target by using -C and thus get rid of "cd"
- Remove ".if ${PORT_OPTIONS:MDOCS}" guard, no longer needed

PR:	199240

- Remove empty files and directories

Approved by:	portmgr (antoine)

- Update to 2.767

Remove trailing whitespaces from category lang

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

- Convert to staging

Add NO_STAGE all over the place in preparation for the staging support (cat:
lang)

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

Fix build error with clang.

- remove MD5

For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports.

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Remove USE_REINPLACE from the categories starting with L

Upgrade to 2.763.

PR:             ports/91459
Submitted by:   Ports Fury

- Add SHA256

Update to 2.761

PR:             ports/85880
Submitted by:   Ports Fury

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Update to version 2.751

PR:             ports/69298
Submitted by:   Ports Fury

- Update to version 2.744

PR:             ports/66469
Submitted by:   Ports Fury

- Update to version 2.743

PR:             ports/63007
Submitted by:   Ports Fury

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

SIZEify.

- Update to version 2.730

PR:             59009
Submitted by:   Ports Fury

Update to 2.722.

PR:             51231
Submitted by:   Ports Fury

De-pkg-comment.

Upgrade to 2.721.

PR:             ports/47081
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 2.716

PR:             43447
Approved by:    kris (mentor)

Replace ${PERL} with ${REINPLACE_CMD}

PR:             39605
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

Update to 2.712    

Update to version 2.711.    

Update to 2.697    

Unbreak port. Added manpage, replaced patches with regex, added PORTDOCS.    

Previous version was unavailable; partially upgrade this port to the   latest
version and switch to using a versioned distfile so it has a chance   to keep
building, but mark BROKEN for now because the patches fail to   apply to the new
version.    

Upgrade from 2.64 to 2.66.    

Convert category lang to new layout.  

Eliminate WRKSRC=${WRKDIR}/${PKGNAME} lines, as these will break when  
PORTREVISION or PORTEPOCH are defined.    

Upgrade to yabasic 2.64    

Update to version 2.63.3.