FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

I am looking for an LTO tape library. Do you have one to spare?
Port details
exim-ldap2 4.82.1_5 mail on this many watch lists=14 search for ports that depend on this port An older version of this port was marked as vulnerable.
High performance MTA for Unix systems on the Internet
Maintained by: vsevolod@FreeBSD.org search for ports maintained by this maintainer
Port Added: 03 Jul 2001 08:21:50
Also Listed In: ipv6
License: GPLv2


Exim is a mail transfer agent for Unix systems connected to the Internet.
It is a monolithic MTA designed to be a command line compatible drop-in
replacement for Sendmail.

Exim is an excellent mailer for an ISP, as its control and flexibility
are very good and its requeueing and retry algorithms are very powerful.
Exim's configuration syntax is well documented.

WWW: http://www.exim.org/
SVNWeb : Main Web Site : Distfiles Availability : PortsMon
Master port: mail/exim

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Required To Build:
  1. security/openssl
  2. converters/libiconv
  3. lang/perl5.16
Required To Run:
  1. security/openssl
  2. lang/perl5.16
Required Libraries:
  1. devel/pcre
There are no ports dependent upon this port

To install the port: cd /usr/ports/mail/exim-ldap2/ && make install clean
To add the package: pkg install mail/exim-ldap2


Configuration Options
===> The following configuration options are available for exim-ldap2-4.82.1_5:
     ALT_CONFIG_PREFIX=off: Restrict the set of configuration files
     CONTENT_SCAN=off: Enable exiscan email content scanner
     DAEMON=on: Install scripts to run as a daemon
     DCC=off: Enable DCC at ACL support via dccifd
     DEBUG=off: Build with debugging support
     DISABLE_D_OPT=on: Disable macros overrides using option -D
     DKIM=on: Enable support for DKIM
     DMARC=off: Enable DMARC support
     EMBEDDED_PERL=on: Enable embedded Perl interpreter
     EXIMON=off: Build eximon monitor (requires X libraries)
     ICONV=on: Enable header charset conversion
     IPV6=on: IPv6 protocol support
     LISTMATCH_RHS=off: Enable pre-4.77 behaviour for match_*
     LMTP=off: RFC2033 SMTP over command pipe transport
     OCSP=off: Enable OCSP stapling
     OLD_DEMIME=on: Enable old, deprecated "demime" ACL
     READLINE=off: Enable readline(3) library
     SPF=off: Enable Sender Policy Framework checking
     SRS=off: Enable Sender Rewriting Scheme
     SRS_ALT=off: Enable alternative SRS library
     SUID=on: Install the exim binary suid root
     TCP_WRAPPERS=off: Enable /etc/hosts.allow access control
     WISHLIST=off: Include the unsupported patches
     XCLIENT=off: Enable XCLIENT command in exim
====> SMTP Authorization
     AUTH_CRAM_MD5=on: Enable CRAM-MD5 authentication mechanisms
     AUTH_DOVECOT=on: Enable Dovecot authentication mechanisms
     AUTH_PLAINTEXT=on: Enable plaintext authentication
     AUTH_RADIUS=off: Enable radius (RFC 2865) authentication
     AUTH_SASL=off: Enable use of Cyrus SASL auth library
     AUTH_SPA=on: Enable Secure Password Authentication
     SASLAUTHD=off: Enable use of Cyrus SASL auth daemon
     PAM=on: Enable PAM authentication mechanisms
     PASSWD=on: Enable /etc/passwd lookups
====> Lookup support
     CDB=on: Enable CDB-style lookups
     BDB=off: Enable Berkeley DB lookups
     DNSDB=on: Enable DNS-style lookups
     DSEARCH=on: Enable directory-list lookups
     LSEARCH=on: Enable wildcarded-file lookups
     MYSQL=off: Enable mysql lookups
     NIS=on: Enable NIS-style lookups
     OPENLDAP=off: Enable LDAP lookups
     PGSQL=off: Enable postgresql lookups
     REDIS=off: Enable redis lookups
     SQLITE=off: Enable SQLite lookups
====> Supported storage formats
     MAILDIR=on: Enable Maildir mailbox format
     MAILSTORE=on: Enable Mailstore mailbox format
     MBX=on: Enable MBX mailbox format
====> TLS support: you can only select none or one of them
     TLS=on: TLS support
     GNUTLS=off: Use GnuTLS instead of OpenSSL for TLS
====> Local scan patch: you can only select none or one of them
     SA_EXIM=off: Build with Spamassassin local scan
     SO_1024=off: Build with Spamooborona-1024 local scan
     KAS=off: Build with Kaspersky AntiSpam local scan
===> Use 'make config' to modify these settings

Master Sites:
  1. http://distcache.FreeBSD.org/ports-distfiles/exim/

Number of commits found: 5

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
04 Jul 2014 11:57:12
Original commit files touched by this commit  4.82.1_1
Revision:360601
vsevolod search for other commits by this committer
- Support stage
- Update to 4.82.1 (fixes issues with DMARC)
- Simplify plist
- Take maintainership

Reviewed by:	bapt
20 Sep 2013 19:59:14
Original commit files touched by this commit  4.80.1_2
Revision:327742
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)
29 Sep 2003 12:56:01
Original commit files touched by this commit  4.24
 This port version is marked as vulnerable.
sheldonh search for other commits by this committer
Don't hard-code the desired OpenLDAP version; this value happens to be
the default now, and should slide foward gracefully (or obey make.conf
or portupgrade.conf).

Reported by:    Oliver Eikemeier <eikemeier@fillmore-labs.com>
29 Sep 2003 11:42:46
Original commit files touched by this commit  4.24
 This port version is marked as vulnerable.
sheldonh search for other commits by this committer
WARNING: See caution at the end of this bullet list.

* Update to exim-4.24 (bugfix release).
* Wishlist patch for "eqi" incorporated.
* Mark exim-{ldap2,mysql,postgresql,} as conflicting.
* Substitute PORTREVISION for build number so that the version string
  hints at which version of the port the binary comes from.
* Clean up POST-INSTALL-NOTES.
* Install example scripts, especially upgrade converters, now that exim-old
  has been retired.
* Enable DNSDB-style lookup support by default; it can be disabled with
  WITHOUT_DNSDB.
* Simplify LDAP support, using various versions of OpenLDAP only.
  The old WITH_OPENLDAP[0-9][0-9] options are now invalid; use
  WITH_OPENLDAP and/or WITH_OPENLDAP_VER instead.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
03 Jul 2001 12:21:50
files touched by this commit
sheldonh search for other commits by this committer
Add slave port for Exim so that packages will be built for Exim   that include
support for LDAP using OpenLDAP2.    

Number of commits found: 5

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
dbusJul 03
mencoderJun 28
mplayerJun 28
lzo2Jun 26
phpmyadmin*Jun 24
gnupgJun 23
gnupg1Jun 23
samba36Jun 23
samba4Jun 23
samba41Jun 23
iodineJun 18
asteriskJun 17
asterisk11Jun 17
dbusJun 14
chromiumJun 10

7 vulnerabilities affecting 10 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds


Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24447
Broken 195
Deprecated 601
Ignore 517
Forbidden 2
Restricted 265
No CDROM 102
Vulnerable 26
Expired 3
Set to expire 588
Interactive 15
new 24 hours 3
new 48 hours9
new 7 days36
new fortnight53
new month100

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.