A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 52

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

Update to 1.0.3

PR:             ports/125904
Submitted by:   Naram Qashat <cyberbotx@cyberbotx.com>

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Specify dependencies on xorg libraries, bump portrevision

Reported by:    pointyhat

Update to 1.0.2

PR:             ports/120522
Submitted by:   Naram Qashat <cyberbotx@cyberbotx.com>

Fix the build with new gtk20.

PR:             ports/117624, ports/117629 and ports/117768
Reported by:    Ralph Zitz <ralph@imada.sdu.dk>,
                Randy Pratt <bsd-unix@embarqmail.com>
                Kyryll A Mirnenko <mirya@zoc.com.ua>

Really turn off gtk support if the option is unchecked.

- Enable x264 support. It is usually brought in indirectly via ffmpeg, so make
  it always on and fix plist

Reported by:    pointyhat

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

Add faad to LIB_DEPENDS and plist since its now supported via ffmpeg

Reported by:    pointyhat via kris

- Chase increase of audio/libvorbis shlib version.
- Bump PORTREVISION

Use multimedia/ffmpeg now instead of multimedia/ffmpeg-devel

Update to 1.0.0

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- /objformat=/s|=.*|=elf|

-Update to 0.9.10.
-Add WITH_OPTIMIZED_CFLAGS knob, off by default.
-Respect the CFLAGS/CPUTYPE.

Reviewed by:    ahze

Remove support for deprecated jpeg-mmx

- Disable ffmpeg support if multimedia/ffmpeg is installed before building
  libquicktime, otherwise depend on multimedia/ffmpeg-devel

Reported by:    Randy Pratt <bsd-unix@earthlink.net>

- Update to 0.9.9

- Transfer MAINTAINER to multimedia@

Approved by:    dhw (postmaster, for using multimedia@ as maintainer)
                gnome (gstreamer ports)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Revert to making ffmpeg default instead of ffmpeg-devel

- Fix plist if used with old ffmpeg
- Default to using ffmpeg-devel unless ffmpeg is already installed

- Update to 0.9.8
- Switch WITH_GTK to WITH_GTK2 to be on the same page as ports/KNOBS

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

- Update to 0.9.7

- Update to 0.9.6
- This version now supports ffmpeg-devel

- Update to 0.9.5

Note: Does not build with ffmpeg-devel, but will run w/ ffmpeg-devel.

- Only detect MMX on i386 not amd64

- Enable some depreciated library functions to fix build of
  multimedia/mjpegtools
- Bump PORTREVISION

auto-detect gtk12 in helps of depreciating gtk12.

Fix plist for lame support

Reported by:    pointyhat via kris

- Make lame support optional and off by default since lame can't be packaged.

Update to 0.9.4

Chase library version bump on multimedia/ffmpeg

Change email to new FreeBSD.org address

Approved by:adamw (mentor)

- Use jpeg-mmx on i386

PR:             ports/72557
Submitted by:   Michael Johnson <ahze@ahze.net> (maintainer)

- install portdocs
- fix build on 4.x (pointed out by vs@)
- use SOURCEFORGE_EXTENDED in master sites

PR:             69643
Submitted by:   maintainer

upgrade to 0.9.3
grab maintainership

PR:             69405
Submitted by:   Michael Johnson <ahze@ahze.net>

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Chase libdv shared library version bump

Fix build on AMD64

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Catch up with libogg/libvorbis version bump.

- Update to version 0.9.2

PR:             59334
Submitted by:   Ports Fury

Remove hardwired arch-dependent flags from CFLAGS.

PR:             52276
Submitted by:   Ports Fury

Remove USE_GNOMENG.

After repo copy from graphics category to newly create multimedia
one, update all appropriate references: *_DEPENDS, CATEGORIES

Repo copied by:         cvs (joe)
Approved by:            portmgr (self & no objections)

Number of commits found: 52

9 vulnerabilities affecting 22 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities