Litecoin is a peer-to-peer Internet currency that enables instant payments to
anyone in the world. It is based on the Bitcoin protocol but differs from
Bitcoin in that it can be efficiently mined with consumer-grade hardware.
Litecoin provides faster transaction confirmations (2.5 minutes on average) and
uses memory-hard, scrypt-based mining proof-of-work algorithm to target the
regular computers and GPUs most people already have. The Litecoin network is
scheduled to produce 84 million currency units.
One of the aims of Litecoin was to provide a mining algorithm that could run at
the same time, on the same hardware used to mine bitcoins. With the rise of
specialized ASICs for Bitcoin, Litecoin continues to satisfy these goals. It is
unlikely for ASIC mining to be developed for Litecoin until the currency is
widely used.
===> The following configuration options are available for litecoin-0.21.4_14:
DBUS=on: D-Bus IPC system support
DEBUG=off: Build with debugging support
HARDENING=on: Attempt to harden binaries (PIE for ASLR, NX Stack)
QRCODES=on: Display QR Codes
TESTS=off: Build test binary and unit tests
UPNP=on: UPnP protocol support
WALLET_BDBMODERN=on: Wallet using modern BDB 18.x
ZMQ=on: Block and transaction broadcasting with ZeroMQ
===> Use 'make config' to modify these settings
*/*: Bump all devel/protobuf consumers
They must always be bumped after devel/protobuf because it include
following files whose filenames contain %%PORTVERSION%%. Consequently,
the shlib will always change when PORTVERSION is increased.
lib/libprotobuf-lite.so.%%PORTVERSION%%.0
lib/libprotobuf.so.%%PORTVERSION%%.0
lib/libprotoc.so.%%PORTVERSION%%.0
Approved by: portmgr (blanket; fixing consumers)
devel/libfmt: Bump PORTREVISION of dependent ports for shlib change after
786cb608216ce14e8ced27108c96a1f2c8492fca
The following ports are skipped because they have been updated after
786cb608216ce14e8ced27108c96a1f2c8492fca.
- chinese/fcitx5-chinese-addons
- chinese/fcitx5-mcbopomofo
- devel/fatal
- devel/fbthrift
- devel/folly
- devel/spdlog
- mail/mu
- net/fb303
- net/mvfst
- net/wangle
- science/seacas
- security/fizz
- www/proxygen
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
net-p2p/litecoin: update to 0.21.2.1
Summary: update litecoin and associated port to latest version
Test Plan:
poudriere testport -j 13_0-amd64 net-p2p/litecoin
poudriere bulk -C -j 13_0-amd64 net-p2p/litecoin net-p2p/litecoin-daemon
net-p2p/litecoin-utils
install litecoin-daemon and litecoin-utils test locally in regression mode
Reviewed by: arrowd
Differential Revision: https://reviews.freebsd.org/D35969
net-p2p/litecoin: fix build on GCC architectures
Recent upgrade of some dependency causes GCC to fail to build this port:
httpserver.cpp:74:10: error: 'deque' in namespace 'std' does not name a template
type
74 | std::deque<std::unique_ptr<WorkItem>> queue;
| ^~~~~
httpserver.cpp:33:1: note: 'std::deque' is defined in header '<deque>'; did you
forget to '#include <deque>'?
32 | #include <support/events.h>
+++ |+#include <deque>
33 |
httpserver.cpp: In member function 'bool
WorkQueue<WorkItem>::Enqueue(WorkItem*)':
httpserver.cpp:92:13: error: 'queue' was not declared in this scope; did you
mean 'Enqueue'?
92 | if (queue.size() >= maxDepth) {
| ^~~~~
| Enqueue
(Only the first 15 lines of the commit message are shown above )
net-p2p/litecoin: fix build on big-endian architectures
Include sys/endian.h in src/crypto/scrypt.cpp, big-endian architectures need it:
crypto/scrypt.cpp:157:3: error: 'be32enc' was not declared in this scope
157 | be32enc(ivec, (uint32_t)(i + 1));
| ^~~~~~~
crypto/scrypt.cpp: In function 'void scrypt_1024_1_1_256_sp_generic(const char*,
char*, char*)':
crypto/scrypt.cpp:269:10: error: 'le32dec' was not declared in this scope
269 | X[k] = le32dec(&B[4 * k]);
| ^~~~~~~
crypto/scrypt.cpp:285:3: error: 'le32enc' was not declared in this scope
285 | le32enc(&B[4 * k], X[k]);
| ^~~~~~~
PR: 240695
Approved by: hsw@bitmark.com (maintainer), linimon (mentor)
Update to 0.17.1 release and add the option (default enabled) to use
a newer BDB version (sync with bitcoin port).
PR: 240058
Submitted by: ale
Approved by: maintainer
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Remove compatibility code for FreeBSD < 11.2 from all ports.
Simplify some ports where DragonFlyBSD no longer needs to be special-cased.
Submitted by: rene
Reviewed by: bapt, jbeich
Differential Revision: https://reviews.freebsd.org/D17724
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
- update to miniupnpc 2.1
PR: 228050
Submitted by: Hung-Yi Chen
- fix python build
- add LICENSE for slave port
- make portlint happier
- bump PORTREVISION on ports using the shared lib
Adjust PORTREVISION order to pet portlint after r467711
Tools/scripts/bump-revision.sh adds PORTREVISION in the wrong place
when DISTVERSION*FIX is used.
net-p2p/litecoin: update to 0.14.2
While here, add rc script for litecoin-daemon
PR: 222343
Submitted by: Christopher Hall <hsw@bitmark.com> (with changes)
Mark some ports failing on power64. In cases where the error message
was a stub, provide a real one.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Reported by: swills
Update devel/protobuf to 3.3.0
- Remove USE_CSTD=c99: it was added for [1], now audio/clementine-player builds
fine without it
- Bump PORTREVISION for shlib change
Changes: https://github.com/google/protobuf/releases
PR: 178687 [1]
