A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 82

Fix dependency broken due to acroread7 removal.

andreas' commit bit has been taken in for safekeeping.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Remove support for OSVERSION < 5

Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.

Approved by:    portmgr (pav)

"make describe" failed in top-level "make index"
since ports configure script adds "-nox11" suffix
even when ${GHOSTSCRIPT_PORT} is already "ghostscript-gpl-nox11".

Submitted by:   G. Paul Ziemba <paul@treehouse.napa.ca.us>
Reviewed by:    me

Depend on graphics/tgif port not tgif-nls.
Bumped portrevision

PR:             113549
Submitted by:   Geraud CONTINSOUZAS

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

. drop variable RUN_DEPENDS for shells/bash2;
. do not bump PORTREVISION since this dependency is not default.

PR:             108627
Submitted by:   bsam (me)
Approved by:    andreas (maintainer timeout -- 2 weeks)

Update to new version 7.2.8
New features: can play audio files.
lpd then acts like a jukebox.
Remote Audio printing/playing is at experimental stage (untested).
Theoretically it should be possible that multiple print clients
feed the central print server with sound card with audio files.

fix acroread dependency after recent changes to the acrobat reader's
ports structure

PR:             ports/99354
Submitted by:   Kostik Belousov <kib@FreeBSD.org>

It no use to make it build OK on tinderbox if you commit an older file.
Unbreak make install: list pkg-message in SUB_FILES and @${CAT} ${PKGMESSAGE}.

Submitted by:   Scott Allendorf <scott-allendorf@uiowa.edu>
Approved by:    maintianer (andreas@, implicit - out of touch for the moment)

- depend on net/samba3 instead of old, forbiden net/samba [1] [2]
- pet portlint [3]
- pkg-message -> files/pkg-message.in and add to SUB_LIST [3]
- bump PROTREVISION for depends change [3]

PR:             ports/98456 [1], ports/99066 [2]
Submitted by:   Shaun Amott <shaun@inerd.com> [1],
                Gerard E. Seibert <ges@seibercom.net> [2]
                itetcu (me) [3]
Approved by:    andreas@ (maintainer, implicit because unreachable at the
                moment)

new bugfix release 7.2.7
make spaces possible in printer name (samba)

PR:             90744
Submitted by:   Roman Kurakin <rik at FreeBSD dot org>

- Remove bzip2 incantations since it has been part of base system since FreeBSD
4.4.

PR:             ports/88984
Submitted by:   edwin
Approved by:    maintainer timeout (2 weeks)

Make apsfilter prefix clean by setting CONFIGURE_ARGS.
Wrongly thought HAS_CONFIGURE variable at least hands over PREFIX.
Bumped port revision.

Submitted by:   pointyhat (kris)

Thanks for the bugreport including fix. Fix was not complete,
I added the missing changes for manual config.

- Depend on acroread7 instead of acroread5.
  Acroread5 is outdated and marked BROKEN due to multiple security issues
  So the port didn't build/install
- changed manual config and batch mode
- portrevision bump

Submitted by:   Antonio Arredondo <aarredon@cs.nmsu.edu>

- update to 7.2.6 (bugfixrelease)
- pcl3 and hpdj driver fixes for HP DeskJet550C driver and compatible printer
- fixes port dependency for acroread5

PR:             ports/77405
Submitted by:   John Cochran <jdc@fiawol.org>

- added suggested patch to use bash3 as default dependency for bash
- while being here trimmed COMMENT according to portlint
- providing backward compatibility if needed via WITH_BASH2 make env var
- bumping port revision
- closing 76805

PR:             76805
Submitted by:   Michael C.Shultz <reso3w83@verizon.net>

Chase print/acroread5 to print/acroread

Extra Special Pointy Santa Hat to:      trevor

- cleanup after USE_GHOSTSCRIPT_RUN changes in Makefile
  It has been forgotten to change configure script as well
- bumped port revision since it fixes a bug reported by
  Holger Kipp <h.kipp@eurowings.com>

Approved by:    portmgr (Mark Linimon)

- honour PAPERSIZE variable like in a2ps and psutils ports
- default to letter
- inspired by PR but using a more suitable solution to use the
  environment variable already used by other ports instead by
  using new one (PAPER_SIZE and A4_PAPER)

PR:             48140

- sketch is now called skencil
- fixed run-dependencies
- no revision bump, since this doesn't affect normal port installation
  or package building.

Use the new ghostscript options.

Submitted by:   linimon

Variable GSPORT is recursive.

PR:             60532
Submitted by:   leeym
Approved by:    maintainer timeout (2 weeks)

- typo in make variables, at some places "WITH_GHOSTSCRIPT_AFP1" has been used
  instead of using "WITH_GHOSTSCRIPT_AFPL"
- bumped port revision, because this sanitizes dependencies

Submitted by:    Frank Bartels <knarf@knarf.de>

[PATCH] print/apsfilter: enable choose of ghostscript interpreter

        This patch allows the admin of the machine to choose either
        print/ghostscript-gnu or print/ghostscript-afp1

Please note that the wrong version of this patch (the one with afp1
instead of afpl) had already been applied by andreas@. I've updated
this to fix it.

PR:             ports/54941
Submitted by:   Jens Rehsack <rehsack@liwing.de>

- enable choose of ghostscript interpreter
- change all occurrences of acrobat reader from v4 to v5
- bumped portrevision

To Jens in e-mail:
"Jens, do you take care of the pending PRs ?
Content of PRs sounded to me as if you are waiting for several changes."

PR:             54958 54960 (both pending)
Submitted by:   Jens Rehsack <rehsack@liwing.de>

- use acroread5 port instead of old ancient acroread (v3) for port dependency,
  good suggestion by: ajhar@physics.miami.edu (Dr. Edward Ajhar)
- update apsfilters acroread search order to use acroread5 in the 1st place
- bump PORTREVISION
- tested installation and package-building

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

fix pkg-plist

PR:             46641
Submitted by:   Bjoern A.Zeeb <bzeeb+freebsdports@zabbadoz.net>

- update to 7.2.5
- important bugfixrelease
- unbreaks windows/novell/appletalk remote printing
- explanation: permissions 600 root:daemon
  were too strong for smbclient & Co.'s config files...
- fix: teach SETUP to use 640 root:daemon as default
- If that's still not sufficient, 'hack' SETUP
  and fine tune the new global PASSWD_PROTECT=640 variable.

update to new apsfilter version 7.2.4
this is mainly a BUGFIX Release

NEW FEATURES
        - some ijs driver scripts got more differentiation
          concerning options for print quality.
DOCUMENTATION
        - wrong manual reference in apsfilter manpage, changed from
          smbprint(1) to smbclient(1)
        - apsfilter handbook got a path fix and cosmetic changes
        - support for ijs 1.1 and later (prior 1.0 and later)
BUG FIXES
        - driver/stp/escp2-440
        - set traditional umask in SETUP (022) just for the case
          somebodies root account has strange default settings not
          to end up with screwed permissions, that make printing
          impossible.
        - update driver MAPPINGS
CODE IMPROVEMENTS
        - partly cosmetic, get rid of GS_MODEL
        - modified gs_cmnd

backout last change by request of Kris Kenneways mail in -developers

use new PORTCOMMENT

- set umask 022 in SETUP, so that it works under root environment
  with too restricive umask settings like '026'.
- bumped port revision, since this unbreaks installation under
  non-default root environments

Submitted by:   Martin.Kraemer@Fujitsu-Siemens.com

- added needed run dependency
  added dependency to print/hpijs, since the ijs driver isn't automatically
  installed anymore when installing ghostscript
- therefore bumped portrevision

I recommend you to upgrade to this new version
* update to apsfilter 7.2.3
* contains two major bugfixes
  a) printing using newest HP IJS driver is fixed (PR 37085)
     the fix has been taken from other source but PR should be resolved
  b) printing to a remote windows printer via samba is fixed
     there was a nasty typo in the apsfilter script ($SMP_IP -> $SMB_IP)
* other changes
- new gimp-print driver / ijsgimpprint
- add new pretty command to set text-to-PostScript highlight level
- fix "remote copies" parameter to lpr
- clean up template apsfilterrc
* FreeBSD/port related things:
- could close all problems report
- PR 34153: fixed configure script: a permanent runtime dependency
  to bzip2 is inappropriate on FreeBSD systems that have bzip2 in
  the base system.
* For a list of all changes please look at ANNOUNCE and ChangeLog file
        http://www.apsfilter.org/download.html

PR:             34153, 37085

Add USE_SUBMAKE, where it might be necessary.

- new apsfilter version 7.2.2 - bugfix release !   - please upgrade   - updated
pkg-plist to match reality   - tested packaging   Changes:   - replace awk
"duplex" function with psset call   - adjust psnup rotation to various
converters     for landscape mode   - add landscape option to enscript command
line   - introduce IGNORE_LPD_RAW variable to please buggy     spoolers that
send jobs in raw mode   - sanitize ": ${foo:-bar}" to ": ${foo:=bar}"   - make
n{c}print line whitespace-safe   - save return code in global temporary file   -
typo in wmf2eps line   - make apspreview use global "restrictions" file   - get
basedir in SETUP from configure   - protect $foo[bar] contructs from being
expanded     to array elements by zsh   - add "-dPARANOIDSAFER" for gs7.04
(harmless for all     older releases)   - save "rm" and "rp" in SETUP.cfg   -
add some hints w.r.t landscape and n-up in handbook   - remove media types in
scripts for some PCL printers   - be more helpful with "invalid method"   -
LaserJet 4L needs fixed 300dpi   - LN macro in Makefile needs -n switch -- we
must     create a directory link even if one exists already   - add .PHONY
targets in Makefiles   - MAPPING update   - change email address in various
places   new driver scripts:   -  ljet4l, pips/sc70s, pips/sc80s, stp/pcl-2,
stp/pcl-4    

Update apsfilter port to 7.2.1   Important fixes for FreeBSD   Patches from
files subdir went into this new release   General fixes:          - remove
apsfilter installation error when typing "make install"             by using
ln's -f (force) option to overwrite an existing symlink             (just in
case you overwrite another installation).    

Update Prio: high (because of driver and other fixes, see below)    

Update port dependency, if defined APSFILTER_ALL   The interactive script will
be updated later.   Don't bump port revision, since next following commit   will
contain new apsfilter release, that is now in the   queue, before I finished
polishing interactive installartion.   But I didn't want to mix this change and
the new apsfilter   version in one commit.    

Update to apsfilter version 7.1.1    

update to apsfilter 7.1.0   - new design: use GNU configure alike script
(without the bloat) for     creating different files (scripts, manpages,
handbook, Makefile).     now paths are 100% matching.   - create portable
Makefile across various platforms   - manpage update, supported file types,
commandline options (lpr -C/-Z),     docu fixes   - some fixes in driver
(hl1250, bjc600/800)    

Unluckily FreeBSD's shell isn't able to read from/write to /dev/stdin   and
stdout.   Therefore we have to use bash as shell for /usr/local/bin/aps2file  
program.   Arrange things with patch and pre-configure command, so that this  
port stays prefix-clean.   The patch inserts !!PREFIX!!/bin/bash and configure
configures in   the current PREFIX settings.   I'd whish somebody could fix our
shell to remove the dependency from bash.    

New apsfilter version 7.0.1   - patch-SETUP is included in 7.0.1 (we don't
provide insane defaults anymore)   - support for HPIJS V 1.0 ("IJS" driver)   -
still supporting old HPIJS driver ("HPIJS" driver)   - some more sanity checks
in SETUP (check is print device is character special)   - added bjc800 driver
script, since it differs to bjc600 printer   - format of MAPFILE documented   -
handbook has been updated   - compatible to 7.0.0 version, so old entries and
spooldirs should work     after upgrade has been made    

update apsfilter to new version 7.0, here a short summary,   see ANNOUNCE and
ChangeLog for a complete list:   - supports fully ghostscript7   - enhanced
driver support, hpijs, pips, latest gimp-print, etc ...   - per driver scripts,
where printer manufacturer *could* place     their driver/scripts, the case
structure wasn't scaleable anymore     an led to incomplete support or to large
apsfilter script   - unified command-line options, see handbook   - support for
HARDWARE_COPIES if your printer can print multiple copies     himself   - option
settings can be restricted by the administrator for all printer     or print
queues (maybe to save print costs on color printers ...)   - support for many
new filetypes   - print contens of archives: tar, cpio, ar, zip, zoo ...   -
security: update for duplex print keys   - separate faq has gone, everything is
in the handbook   - error messages can be sent to user now via Cc:   - no bugs
so far ;-)    

- Add patch, update to FAQ and handbook and some driver updates for SETUP   -
place apsfilter distfiles into subdir apsfilter, since name of patchfile    
doesn't contain string apsfilter. On my TODO list for future.   - update prio
for apsfilter user: low (hint: try/test apsfilter-current     from
http://www.apsfilter.org if you are looking for more printer     support and
other goodies)    

Replace the ghostscript6 dependencies with ghostscript-gnu.    

Conditionalize bzip2 dependencies.    

Standartise the way used to disable X11 support in various ports. From now   on
WITHOUT_X11 is the Only True Way[tm].    

update from apsfilter 6.1.0 to 6.1.1   - a duplex printing password fix turned
out incompatibility of     BSD od(1) to other flavours of od(1).   - apsfilter
6.1.1 contains the duplex password fix     + a substitution of od(1) with
hexdump which also seems to be     available on Linux and Solaris.   - no
PORTREVISION dump since we have a new release   - added pkg-message file for
easier handling and addition of     notification to apsfilter *package*     had
to change configure script and Makefile to follow that new     infrastructure.  
- troff notification in dependency to FreeBSD version    

update to new apsfilter version 6.1.0   all from -current has been merged after
a long testing period.   See the ANNOUNCE file for the long list of bugfixes,
security,   feature and code enhancements.    

merged everything from apsfilter-current   see new handbook !!!   update to
apsfilter 6.1.0 BETA   if everything is right I'll tag and roll apsfilter 6.1.0 
 bumped PORTREVISION    

- bump port revision, you can select ghostscript version without X11 support    
when doing interactive installation    

- bumped port revisions because of new dependencies   - default in BATCH mode is
now, NOT to have X11 based utilities in     port dependencies, I think this
makes apsfilter better in     - running on small printservers that don't have
X11 installed     - making apsfilter package more "sexy" for being placed onto
the 1st       FreeBSD installation CD-ROM, since now it consumes less space !!! 
 - make apsfilter use the same make environment variable NO_X like     in
ghostscript6 port   - this enables you to build and run apsfilter even on a
small printserver,     that doesn't have X installed   - NO_X is even usefull
when having APSFILTER_ALL set, since then it installs     all
available/supported filter utilities, that don't require X11   - the last one
needs some more fine tuning, currently I left it empty,     have to think about,
whats a possible replacement that don't need X11...    

update apsfilter port   - add patchsite and patchfile   - fix1: correct
apsfilter version string that is echo'd in logfile   	when script debugging is
turned on   - fix2: samba remote printing bug fixed. The exported variable  
	containing the windows password was spelled incorrectly.   	samba 2.0.7 uses
PASSWD not PASSWORD.    

- manpages were missing in ports Makefile     therefore they were also missing
in package (-> PORTREVISION bump)   - portlint complained about descr. line
being too long, trimmed it down     to below 70 chars.    

Update old apsfilter-stable with V 6.0.0 from new stable-branch.  

die apsfilter5, long live apsfilter6 ;-)   Just released the new version 6.0.0
release.  

update patch   hint: no need to update folks, sorry, make-release still doesn't
work right   and updates still apsfilter-stable if I want to roll a new -current
snapshot.   I will fix it in the future but currently I don't have time.    

update after make release    

update after make-release    

upgrade after make-release.    

update.    

Upgrade md5 chksum.    

update after make release.    

update patch after make-release    

Update: new patch    

MFC   Allow 6.x gs versions, even developer snapshots.   by using gs --version
to get gs version number.    

use newest available diff.    

update apsfilter stable port   last recent changes:    

update port after new make-release script on www.apsfilter.org   which produces
files with other md5 checksum, but more accurate   file creation date.    

unbreak port.   Add patch 5.4.2 to RELENG_5    

Had to mark it broken, because patches for 5.4.2 were not created correctly   on
www.apsfilter.org, after make-release script has moved from apsfilter   source
to www area ...   Am working on this, sorry for any inconveniances !    

reorganized apsfilter download area ...   make-release produced new diff but
actionally no change    

apsfilter main site moved from freefall.freebsd.org   completely to
www.apsfilter.org   Many thanks to the FreeBSD developer team, Jordan, WC,   who
made distribution of apsfilter possible for years.   Changes:   - checksums
changed   - Redesign concerning patches to save CVS repository space     remove
patches in patches directory completely !   - use PATCHFILES in Makefile
instead, which are actually     smaller changes !    

o Synchronize with latest patch on apsfilter homepage...   o Additional
"post-5.4.2 Release" features:   - AppleTalk Remote printer support (via
netatalk's pap(1) utility).     Experimental, please test !   - new revised
uniprint profiles from Harold Bower <HalBower@worldnet.att.net>     and
additionally some new for:     - Epson Stylus 800 (Monochrome) and     - Epson
LQ-570/870/1070/1170 24-pin Dot-Matrix   - prevent printing of an empty page
when using raw printer, default is off now.   - bugfix: older gs versions (<
v6.x) doesn't support "-_", which allows more      efficient read operation. The
bug prevented apsfilter to work with the     older gs versions.   - bugfix: hpdj
(3rd party gs driver) doesn't like the -sBitsPerPixel option.      So stripp it
off, if using hpdj driver.   - FAQ file cleanups   - better hpdj driver defaults
for HP DJ 970 printers   - some cleanups in code when printing PDF files   - and
other things ....    

Move the stragler's www.freebsd.org/~user distfiles to the offical  
MASTER_SITE_LOCAL site.    

use new SCRIPTS_ENV variable   latest diff    

Number of commits found: 82

14 vulnerabilities affecting 30 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities