A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 128 (showing only 100 on this page)

1 | 2  »  

- Update to 20081128

- Update to 20081125

- Update to 20081117
- Remove --disable-zlib-vcheck, it's not necessary anymore and is generating a
  warning on configure script
- Remove libtool from dependencies and leave it using its own libtool, without
  it, clamav doesn't build anymore

Discussed with: Török Edwin at clamav-devel maillist

- Update to 20081105

- Update to 20081016

- Change pre-install: target to pre-su-install: since user and group are
  created there (via pkg-install), and it must be done as root.
- While i'm here, fix the same on clamav-devel port

PR:             ports/126701
Submitted by:   grog

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

- Update to 20080818 to align with 0.94-RC1

- Permit to ser owner and group to clamav milter socket [1]
- Remove @ to show some install commands, and add -v to cp
- Install clamav-milter doc
- User CHOWN and CHMOD from bsd.commands.mk

PR:             ports/126069 [1]
Submitted by:   Matthew D. Fuller <fullermd@over-yonder.net> [1]

- Update to 20080811

- Update to 20080805

- Upgrade to 20080725

- Update to 20080724

- Update to 20080708
- Align clamav-milter startup script with security/clamav version, that waits
  for milter sock before chmod it

- Fix checking of database viruses at startup script that i broke on last
  commit
- Bump PORTREVISION again

Submitted by:   George L. Yermulnik <yz@iptcom.net>
Pointyhat to:   me

- Fix clamd startup script to support cld containers for virus databases
- Bump PORTREVISION

Reported by:    Robert Huff <roberthuff@rcn.com>

- Forgot to remove one conditional about PTHREAD_LIB on last commit

- Remove < 6.1 conditional since it's no longer supported

- Update to 20080520
- Change OPTION UNRAR on by default to align with clamav port
- USE_GMAKE to build fine new version

- Update to 20080221
- Fix pthread problem on 5.x to align with security/clamav
- Fix pkg-install to five correct permissions to log, db and run dirs

- Update to 20080124
- Add a new OPTION ICONV (off by default), with it fix an auto iconv detection
  problem on last version

Reported by:    pavmail

- Update to 20080121

- Update to 20071212
- Unrar code was removed from clamav source due to license problems, and a patch
  was created. I've added an UNRAR option, Off by default.
- Cosmetic changes
- Fix rc.d/clamav-milter to change socket permissions after startup. It fixes
  proclems when sendmail or postfix cannot connect to this socket. [1]

Submitted by:   Chris St Denis <chris@smartt.com>  by email

- Update to 20071011 to reflect 0.92RC2

Update to 20070830

- Update to 20070724

PR:             ports/114854
Submitted by:   delphij

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Remove CURL option, forgotten on last commit. It's not needed anymore

- Update to 20070711

- Fix CLAMAV_CLAMD_SOCKET

Reported by:    Robert Huff <roberthuff@rcn.com>

- Update to 20070529
- Make all last changes that i've made on security/clamav:
  o Make arc, arj, lha and unzoo achives support dependency as OPTIONS
  o Fix build with gethostbyname_r after 601103
  o Install clamav-config.h
  o Change clamav-milter rc.d script to use a var to determine seconds of
    timeout to wait clamd socket be started, just if clamav_clamd_enable
    is set

- Update to 20070218
- Make all cleanups and changes i made on security/clamav port
- Add CURL and LDAP OPTION

- Update to 20061217

- Mark as FORBIDDEN

Security:      
http://www.vuxml.org/freebsd/eb5124a4-8a20-11db-b033-00123ffe8333.html
With hat:       secteam

Update to 20061029 to fix vulnerability

Approved by:    portmgr (erwin)
Security:      
http://www.vuxml.org/freebsd/8012a79d-5d21-11db-bb8d-00123ffe8333.html

- Mark as forbidden

Approved by:    portmgr (secteam blanket)
Security:      
http://www.vuxml.org/freebsd/8012a79d-5d21-11db-bb8d-00123ffe8333.html

- Update do 20060922 snapshot.
- Add --enable-experimental and remove CURL option to test new code that
  doesn't depend of external curl.

Update to 20060905 snapshot

- Update to 20060808
- s/INSTALLS_SHLIB/USE_LDCONFIG/

Update to 20060724

Update to 20060703

- Add an option to print logs on stderr instead stdout, it's useful to catch
  logs and use on smtp log. In preparation to update spamcontro to 2.4 series.
- s/unarj/arj/ on clamscan man [1]
- Bump PORTREVISION because man change

Reported by:    Anton Yuzhaninov <citrin at citrin.ru> [1]

- Update to 20060525
- Use arj and unzoo instead unarj and zoo

Chase gmp library and bump PORTREVISION.

Update to 20060503

- Update to 20060426

- Update to 20060406 snapshot -- fix multiple vulnerabilities
   * CVE-2006-1614
      Damian Put discovered an integer overflow in the PE header parser.
      This is only exploitable if the ArchiveMaxFileSize option is disabled.
   * CVE-2006-1615
      Format string vulnerabilities in the logging code have been discovered,
      which might lead to the execution of arbitrary code.
   * CVE-2006-1630
      David Luyer discovered, that ClamAV can be tricked into an invalid
      memory access in the cli_bitset_set() function, which may lead to
      a denial of service.

- Synchronize with clamav port using SUB_FILES, USE_RC_SUBR

PR:             ports/95425
Submitted by:   garga
Security:       VuXML 6a5174bd-c580-11da-9110-00123ffe8333

Take over maintainership

Approved by:    maintainer by email

- Mark as FORBIDDEN

Security:      
http://www.vuxml.org/freebsd/6a5174bd-c580-11da-9110-00123ffe8333.html

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Update to 20051104

PR:             88483
Approved by:    rob@debank.tv (simon bypass maintainer timeout)
Security:       CAN-2005-3303,
http://www.zerodayinitiative.com/advisories/ZDI-05-002.html

Update to 20051003
Unmark FORBIDDEN

PR:             86878
Approved by:    rob@debank.tv (maintainer), pav (mentor)

Mark FORBIDDEN due to arbitrary code execution vulnerability.

Security:      
http://vuxml.FreeBSD.org/271498a9-2cd4-11da-a263-0001020eed82.html
With hat:       secteam

Change MASTERSITE from ~renato to ~garga because I change my account
here

Approved by:    flz (mentor)

Update to 20050704.

PR:             82972
Submitted by:   Renato Botelho <freebsd@galle.com.br>
Approved by:    Rob Evers (maintainer)

- Bump PORTREVISION

Requested by:   Pavel Rochnyack (irc)

- Fix compilation of the milter interface
- Unconditionally define PORTDOCS, as bsd.port.mk now tests ${NOPORTDOCS}

Fix the packing list

Update to 20050614 (0.86rc1).

PR:             82222
Submitted by:   Renato Botelho <freebsd@galle.com.br>
Approved by:    Rob Evers (maintainer)

Update to 20050608.

PR:             82042
Submitted by:   Renato Botelho <freebsd@galle.com.br>
Approved by:    Rob Evers (maintainer)

- Update to 20050529

PR:             ports/81681
Submitted by:   Renato Botelho <freebsd@galle.com.br>
Approved by:    Rob Evers <rob@debank.tv> (maintainer)

Update to 20050524.

PR:             81441
Submitted by:   Renato Botelho <freebsd@galle.com.br>
Approved by:    Rob Evers (maintainer)

- Update to 20050503

PR:             ports/80581
Submitted by:   Renato Botelho <freebsd@galle.com.br>
Approved by:    rob@debank.tv (maintainer)

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Update to 20050408, unbreak

PR:             ports/79688
Submitted by:   Renato Botelho <freebsd@galle.com.br>

BROKEN: Unfetchable

Drop a log-related SED_SCRIPT rule undeeded since rev#1.61.
Since then, there has been a common rule for both LogFile and
UpdateLogFile.

Introduce a variable LOGDIR instead of using a literal log directory
pathname everywhere.

Approved by:    Rob Evers (maintainer)

Finish incorporating the changes proposed in
ports/75607 into clamav-devel.

In particular, the last change to this port makes
use of the clamav-milter pidfile, which wouldn't be
recorded without the present change.

PR:             ports/75607
Approved by:    maintainer

Unbreak security/clamav-devel by updating it to 20050110 (maintainer update)

PR:             ports/76086
Submitted by:   maintainer
Approved by:    nectar (mentor)

Fix ports: security/clamav and security/clamav-devel (change db
directory to /var/db/clamav and fix removal of db on deinstall)

        For the sake of coherence, the ClamAV database should be
        installed in /var/db/clamav, not /usr/local/share/clamav.
        Also fixes the database removal on package deinstallation.

PR:             ports/74172
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be>
Approved by:    Rob Evers <rob@debank.tv>

Update to 20041213 snapshot.

Approved by:    maintainer

Update to 20041201 snapshot.

Approved by:    maintainer

- Update to 20041101
- Configuration file was renamed to clamd.conf!

PR:             ports/73491
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

Kill off automake18, switching to automake19.  Requiem Mors Pacem.

- Update to 20040826 snapshot
- Fix fetching
- Fix -pthread/-lc_r issue for good
   (courtesy of bsd.autotools.mk, who'd have guessed...)

PR:             ports/71168
Submitted by:   Rob Evers (maintainer), me

Unbreak (fetching) and update security/clamav-devel to 20040701 snapshot

PR:             68596
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

- Update to 20040610

PR:             ports/67792
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

Update to today's release. Propagate CPPFLAGS to CONFIGURE_ENV to enable
building of the milter part. Use autoconf-2.59 instead of the deprecated
2.57

Approved by:    Rob Evers (maintainer)

- Update to 20040603

PR:             ports/67524
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

undo chmod on socket directory

Approved by:    Rob Evers <rob@debank.tv> (maintainer)

- Change permissions on socket directory to 750.
  This unbreaks sendmail.

Submitted by:   ume
Approved by:    maintainer

- Update to 20040524
- Rename rc script freshclam.sh -> clamav-freshclam.sh for consistency
  BEWARE if you're using freshclam daemon you must update your rc.conf!
- Chmod 770 socket directory
- Diff reduction against security/clamav port

PR:             ports/67125
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

- Update to 20040521

PR:             ports/67040
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

- update to 20040503
AllowSupplementaryGroups enabled by default
Removed OSVERSION check (not needed anymore)
Make the port look a bit more like security/clamav

PR:             66203
Submitted by:   Rob Evers

Update to 20040419

PR:             65764
Submitted by:   Rob Evers <rob@debank.tv>

- update to 20040404
PR:             65205
Submitted by:   Rob Evers

- fix deinstallation on clean system.
sed modifies clamav.conf.default and freshclam.conf.default only.
when installing on a clean system from port (package is fine),
clamav.conf.default and clamav.conf are diffrent
also freshclam.conf.default and freshclam.conf are diffrent,
and a deinstallation will leave stale files.

- Update to 20040321 snapshot

PR:             64564
Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

Update to 20040313

PR:             ports/64224
Submitted by:   Rob Evers <rob@haha.debank.tv> (maintainer)

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Replace all known incantations of WANT_{AUTOMAKE,AUTOCONF,LIBTOOL}* with
the USE_<x> equivalents.  In the current scheme of things, the WANT_
variables in this case are synonymous with the USE_ ones, and thus need
to be exterminated.

First in a series of major autotools cleanups.

Upgrade to 20040229 snapshot.

Submitted by:   Rob Evers <rob@debank.tv> (maintainer)

- Unbreak threading issue
PR:             63022
Submitted by:   rob@debank.tv

- Use fixStaleSocket by default
- Add clamav user to mail group (for exim users)
- clean up DOCSDIR variable
PR:             63022
Submitted by:   rob@debank.tv
Suggested by:   eik

FORBIDDEN on 502102: Links against libc_r and libpthread

- update to 20040210
- The install doesn't delete the database anymore
- Don't remove the database on deinstall
- Use OPTIONS target
- handle all config install via the port

You have to run freshclam manually once after upgrade to restore the database.

PR:             62653
Submitted by:   rob@debank.tv

- Fix deinstall when no database was installed.
Submitted by:   dinoex

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

- udpate to 20040129 (Various OLE2/VBA fixes)
Get default config files from BUILD_WRKSRC to fix upgrade when config files are
untouched
Really use the POST-INSTALL target

PR:             62112
Submitted by:   rob@debank.tv

- update to 20040126
Various bugfixes
Added support for OLE2 / VBA streams scanning

PR:             61948
Submitted by:   rob@debank.tv

Number of commits found: 128 (showing only 100 on this page)

1 | 2  »  

9 vulnerabilities affecting 22 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities