Port details |
- fileschanged Utility that reports when files have been altered
- 0.6.5_4 sysutils =5 0.6.5_3Version of this port present on the latest quarterly branch.
- There is no maintainer for this port.
- Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org
- Port Added: 2004-05-24 01:40:38
- Last Update: 2024-09-05 06:17:39
- Commit Hash: 455664c
- People watching this port, also watch:: pcre, dnstop, oinkmaster, unzip, phpMyAdmin-php81
- License: GPLv2
- WWW:
- https://fileschanged.sourceforge.net/
- Description:
- The fileschanged utility is a client to the FAM (File Alteration Monitor)
server that is now available in some distributions. Here's how the fileschanged
FAM client works: you give it some filenames on the command line and then it
monitors those files for changes. When it discovers that a file has changed
(or has been altered), it displays the filename on the standard-output.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- fileschanged>0:sysutils/fileschanged
- To install the port:
- cd /usr/ports/sysutils/fileschanged/ && make install clean
- To add the package, run one of these commands:
- pkg install sysutils/fileschanged
- pkg install fileschanged
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: fileschanged
- Flavors: there is no flavor information for this port.
- distinfo:
- SHA256 (fileschanged-0.6.5.tar.gz) = 63c10995197bca6a7f24a19ca26870abafc919b23a870447cb44199d22f777cc
SIZE (fileschanged-0.6.5.tar.gz) = 270182
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- help2man : misc/help2man
- gmake>=4.4.1 : devel/gmake
- Runtime dependencies:
-
- indexinfo : print/indexinfo
- Library dependencies:
-
- libargp.so : devel/argp-standalone
- libfam.so.0 : devel/gamin
- There are no ports dependent upon this port
Configuration Options:
- ===> The following configuration options are available for fileschanged-0.6.5_4:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
- Options name:
- sysutils_fileschanged
- USES:
- fam gmake localbase
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
0.6.5_4 05 Sep 2024 06:17:39 |
Po-Chuan Hsieh (sunpoet) |
devel/argp-standalone: Update to newer snapshot (8ded2bc)
- Bump PORTREVISION for package change
- Bump PORTREVISION of dependent ports for shlib change |
0.6.5_3 25 Feb 2024 17:49:50 |
Muhammad Moinur Rahman (bofh) |
sysutils/fileschanged: Moved man to share/man
Approved by: portmgr (blanket) |
0.6.5_2 01 Nov 2023 22:11:47 |
Rodrigo Osorio (rodrigo) |
*/*: Update WWW to use HTTPS for sourceforge.net projects
Homepage link is permanent redirected to its HTTPS counterpart |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.6.5_2 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
0.6.5_2 20 Jul 2022 14:23:05 |
Tobias C. Berner (tcberner) |
sysutils: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <jsmith@resonatingmedia.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Landwehr <aaron@snaphat.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Adrian Chadd
* Adrian Chadd <adrian@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Deiter <alex.deiter@gmail.com> (Only the first 15 lines of the commit message are shown above ) |
0.6.5_2 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.6.5_2 10 Nov 2018 18:12:58 |
bapt |
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816 |
0.6.5_1 01 Apr 2016 14:25:18 |
mat |
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight |
0.6.5_1 03 Mar 2016 16:41:57 |
amdmi3 |
- Add LICENSE
- Switch to USES=localbase
- Switch to options helpers |
0.6.5_1 26 Mar 2015 23:18:16 |
marino |
sysutils/fileschanged: disable -Werror, eliminate pkg-plist |
0.6.5_1 22 Nov 2014 09:13:36 |
antoine |
Cleanup plist |
0.6.5_1 11 Jun 2014 14:50:00 |
tijl |
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be (Only the first 15 lines of the commit message are shown above ) |
0.6.5_1 04 Jan 2014 23:40:44 |
antoine |
Convert the tree to USES=fam
Approved by: portmgr (bapt) |
0.6.5_1 13 Nov 2013 12:50:18 |
vanilla |
Support STAGEDIR. |
0.6.5_1 22 Sep 2013 18:05:05 |
bapt |
Fix NO_STAGE attribution |
0.6.5_1 20 Sep 2013 23:06:00 |
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
sysutils) |
0.6.5_1 23 Sep 2011 22:26:39 |
amdmi3 |
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav |
0.6.5_1 19 Mar 2011 12:38:54 |
miwi |
- Get Rid MD5 support |
0.6.5_1 22 Aug 2009 00:35:32 |
amdmi3 |
- Switch SourceForge ports to the new File Release System: categories starting
with P,R,S |
0.6.5_1 17 Mar 2009 19:47:22 |
wxs |
- Respect NOPORTDOCS
PR: ports/132729
Submitted by: Steven Kreuzer <skreuzer@exit2shell.com> |
0.6.5_1 06 Jun 2008 14:03:26 |
edwin |
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav) |
0.6.5 04 Jun 2007 22:29:29 |
pav |
- Update to 0.6.5 |
0.6.0_1 21 Dec 2006 15:36:59 |
arved |
Fix build with gcc41 |
0.6.0_1 11 Feb 2006 02:37:36 |
kris |
Remove direct LIB_DEPENDS on fam in favour of the new USE_FAM
infrastructure. Default to WANT_FAM_SYSTEM=fam to be conservative since
these ports either have not been tested with gamin or are known to fail
(courier).
PR: ports/92583
Submitted by: marcus |
0.6.0_1 25 Nov 2005 18:14:52 |
pav |
- Add SHA256 |
0.6.0_1 26 Oct 2005 14:55:37 |
vs |
Use CONFIGURE_ARGS |
0.6.0_1 15 Jul 2004 22:59:11 |
kris |
Reset undeliverable maintainer address:
----- Transcript of session follows -----
451 4.4.1 reply: read error from mix.premierbank.dp.ua.
<kot@premierbank.dp.ua>... Deferred
Message could not be delivered for 1 week
Message will be deleted from queue
For two consecutive weeks. |
0.6.0_1 16 Jun 2004 18:21:49 |
pav |
- Add patch to fix zombie problem
- Raise portrevision
PR: ports/67927
Submitted by: Konstantin Reznichenko <kot@premierbank.dp.ua> (maintainer) |
0.6.0 23 May 2004 16:29:27 |
pav |
Add fileschanged, a client to the FAM (File Alteration Monitor) server.
Here's how the fileschanged FAM client works: you give it some filenames
on the command line and then it monitors those files for changes. When it
discovers that a file has changed (or has been altered), it displays
the filename on the standard-output.
PR: ports/66894
Submitted by: Konstantin Reznichenko <kot@premierbank.dp.ua> |