|non port: head/sysutils/hal/distinfo
Number of commits found: 22
Sat, 26 Feb 2011
[ 21:20 marcus ] |
Remove the legacy MD5 checksum.
Mon, 10 May 2010
[ 21:19 kwm ] |
(Only the first 10 of 772 ports in this commit are shown above. )
Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .
This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.
Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.(Only the first 15 lines of the commit message are shown above )
Sat, 28 Nov 2009
[ 20:06 marcus ] |
(Only the first 10 of 823 ports in this commit are shown above. )
Presenting GNOME 2.28.1 for FreeBSD. The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.
On the FreeBSD front, though, a lot went into this release. Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration. Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.
But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.
(Only the first 15 lines of the commit message are shown above )
Mon, 19 May 2008
[ 06:24 marcus ] |
Update to 0.5.11.
Mon, 24 Mar 2008
[ 03:50 marcus ] |
(Only the first 10 of 712 ports in this commit are shown above. )
The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD. The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ . On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media. Work
is also underway to tie webkit more closely into GNOME. As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
This release would not have been possible without the contributions and
testing efforts of the following people:
Peter Ulrich Kruppa
J. W. Ballantine
Sun, 3 Feb 2008
[ 16:53 marcus ] |
Update to snapshot 20080203.
Do not assume a cdb length of 16. Instead, set it according to the size
of the data being requested.
Submitted by: kan
Mon, 24 Dec 2007
[ 19:42 marcus ] |
* Make sure all PCI buses are probed
* Be gentler when probing removable media USB and SCSI devices as to not
spam the console with media read failures where there is no media inserted.
This will aleviate the problem with USB/SCSI floppy drives and card
Submitted by: Andriy Gapon <firstname.lastname@example.org> 
Sat, 22 Dec 2007
[ 21:58 marcus ] |
Update to 20071222 which allows hal to build on 6.0.
Submitted by: Alex Stangl <email@example.com>
Sun, 16 Dec 2007
[ 20:31 marcus ] |
Fix the build on 5.X.
Reported by: pointyhat via pav
Sat, 15 Dec 2007
[ 18:03 marcus ] |
Update to snapshot 20071215.
* Remove dependency on isoinfo, and detect disc type internally. 
* Adapt patch from Linux's hal backend to add media changer support and
prevent hal from trying to treat tape changers like CD drivers. 
PR: 118273 
Submitted by: bland 
Sun, 9 Sep 2007
[ 22:08 marcus ] |
Update to snapshot 20070909.
* Add support for ext3 file systems 
* Reopen the devd socket if devd restarts
Submitted by: Raaf <firstname.lastname@example.org> 
Tue, 3 Apr 2007
[ 06:24 marcus ] |
Update to snapshot 20070403.
* Add a new utility function, hf_str_no_slashes(), that converts '/' into '_'
for purposes of UDI constructions. UDI path components cannot contain
embedded slashes, and a trailing slash will cause hald to crash. 
* Ensure that UDIs of ATA and SCSI devices are unique. 
* Do not re-probe disks that are managed by hald-addon-storage since that
will result in a double-probe and data corruption. In particular, this
fixes a problem with CD unmounting when ATAPICAM is enabled. 
Reported by: Chess Griffin <email@example.com> 
sajd on #freebsd-gnome 
Submitted by: jylefort 
Reviewed by: jylefort 
Sat, 24 Mar 2007
[ 20:47 marcus ] |
* Power down the system rather than simply shutting it down. 
* Avoid an infinite loop with buggy PCI firmwares  
* While here, simplify the PCI probing mechanism 
PR: 110492 
Reported by: firstname.lastname@example.org, Nick Withers <email@example.com> 
Submitted by: Rechistov Grigory <firstname.lastname@example.org> 
Sat, 10 Feb 2007
[ 21:17 marcus ] |
Update to snapshot 20070210.
* Fix an assertion in hal-device 
* Fix detection of disc volumes on FreeBSD 5.X
* Fix the mapping of SCSI to atapi devices 
Obtained from: HAL git 
Submitted by: jylefort 
Fri, 5 Jan 2007
[ 03:58 marcus ] |
Update to snapshot 20070104.
* If atapicam is enabled, use the CAM device node instead of the ATAPI
device node to access disc devices. The previous behavior can be restored
by following instructions in the README.freebsd file. 
* Flesh out the list of supported mount options for the vaious file systems
Submitted by: jylefort 
Mon, 25 Dec 2006
[ 03:38 marcus ] |
Update to snapshot 20061224.
* Fix support for ATAPI devices under FreeBSD 5.X 
* Add more mount options for FAT and NTFS file systems
A special thanks to Nigel Wohlers <email@example.com> who provided a machine
for testing the 5.X patches.
Reported by: lofi
Sun, 17 Dec 2006
[ 20:19 marcus ] |
Update to snapshot 20061217.
* Fix some 64-bit compile warnings
* Turn two assertions into additional conditional checks to prevent potential
hald crashes when switching disc media
* Shutdown hald on deinstall to prevent two halds from running on restart
Fri, 17 Nov 2006
[ 06:39 marcus ] |
Update to snapshot 20661117.
* Account for ACPI BIOSes that report a rate of 0xffff while they are still
initializing (adapted from the HAL linux backend)
* Add support for two new net properties: net.freebsd.ifindex and
* Add support for the MBREXT GEOM class
* Create /media for 6.1 and 5.5 users that do not have this directory in
Tue, 7 Nov 2006
[ 22:16 marcus ] |
Update to snapshot 20061107.
* Use the system libvolume_id
* Fix some bashims in the configure script
* Merge the latest HAL ids code from HAL git
* Add support for the pnp.description property
* If hw.acpi.lid_switch_state is set to NONE, set the info.ignore property on
the lid button to TRUE
* Actually introduce the fix for treating blank discs as volumes. This
truly fixes nautilus-cd-burner
* Add support for the new volume.partition properties
* Add more GEOM support for SUN, APPLE, and GPT classes
Thanks to jylefort for reviewing some of these patches, and a bunch of
testers for putting the changes through their paces.
Thu, 2 Nov 2006
[ 22:56 marcus ] |
Update to snapshot 20061102.
* The volume probing helper can take up to a minute to run the isoinfo
command against data DVDs, so bump the timeout up to 60 seconds.
* Fix a spurious warning when running lshal
Add two new properties to SCSI block devices. The first is
block.freebsd.cam_path which is a bus,target,lun path to a SCSI device.
This is needed by tools such as cdrecord, and by adding a private freebsd
property, it is much easier to get apps like nautilus-cd-burner working.
The second property is block.freebsd.atapi_cam_device. This property is
actually attached to ATAPI CAM devices, and denotes the CAM block device
associated with this ATAPI block device. This may be useful for programs
that can only operate with CAM-compliant devices.
Finally, update the volume probing code so that blank discs are treated as
volumes. This is sort of crude. We basically say a disc is blank is it
is a disc and contains no data and no audio.
With all of these changes, plus a minor change to nautilus-cd-burner, n-c-b
now works again on FreeBSD.
Tue, 31 Oct 2006
[ 03:15 marcus ] |
Update to the 20061030 snapshot which contains support for virtual GEOM
classes such as MIRROR, LABEL, GELI, etc. as well as fixes a bug with
handling the return value from open(2) in the volume probing code.
Sat, 14 Oct 2006
[ 08:35 marcus ] |
(Only the first 10 of 577 ports in this commit are shown above. )
Presenting GNOME 2.16.1 for FreeBSD. This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.
On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE. This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed. The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily. We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.
Back to GNOME 2.16. This release brings a huge amount of new functionality
to FreeBSD. The standard release notes can be read at
http://www.gnome.org/start/2.16/ . But on top of what you will read there,(Only the first 15 lines of the commit message are shown above )
Number of commits found: 22
16 vulnerabilities affecting 109 ports have been reported in the past 14 days
* - modified, not new