21:50 bdrewery 

Stop touching the filesystem during build.

The pkg-install handles the scrollkeeper-rebuild and xmlcatalog needs.
This also avoids:
    Shared object "libscrollkeeper.so.0" not found, required by
"scrollkeeper-update"

 

14:25 mat 

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

 

01:18 amdmi3 

- Modernize plist

Approved by:	portmgr blanket

 

22:50 antoine 

Switch ports depending on docbook* through a directory name to a package name,
as a directory name can't be attributed to a package

 

22:46 bapt 

Get rid of gnomehier

 

14:50 tijl 

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

00:22 bapt 

Support stage

 

14:45 mat 

Consolidate the docbook ports into -sgml and -xml variants.

Submitted by:	hrs (based on)
Sponsored by:	Absolight

 

14:50 mat 

Chase docbook cleanup dependencies.

Sponsored by:	Absolight

 

23:17 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

 

10:44 ak 

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

 

11:32 bapt 

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

 

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

19:20 kwm 

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

07:34 ade 

Sync to new bsd.autotools.mk

02:01 ade 

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

01:36 araujo 

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

14:05 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

23:37 marcus 

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for
their work on porting modules and testing the whole ball of wax on
pointyhat (respectively).

The FreeBSD GNOME team would also like to thank our various testers and
contributors:

Yasuda Keisuke
Frank Jahnke
Pawel Worach
Brian Gruber
Franz Klammer
Yuri Pankov
Nick Barkas
Cristian KLEIN
Tony Maher
Scot Hetzel
Martin Matuska (mm)
Benoit Dejean
Martin Wilke (miwi)
(And anyone else I may have missed)

PRs fixed in this release:

111272, 113470, 115995, 116338

10:13 ade 

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

05:14 marcus 

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

02:42 kris 

Use libtool port instead of included version to avoid objformat a.out botch

08:35 marcus 

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,
jylefort and marcus have completed work on a port of HAL to FreeBSD.  This
will allow FreeBSD to take advantage of closer hardware interaction such
as auto-mounting CD-ROMs, USB drives, and music players; auto-playing
audio CDs; and managing laptop power consumption.

But where would this all be without our loyal testers and contributors?
Therefore, the FreeBSD GNOME team would like to thank the following users:

Phillip Neumann <pneumann@gmail.com>
tmclaugh
mux
Yuri Pankov <yuri.pankov@gmail.com>
chinsan
Thomas <freebsdlists@bsdunix.ch>
Brian Gruber <knightbg@yahoo.com>
Franz Klammer <klammer@webonaut.com>
Dominique Goncalves <dominique.goncalves@gmail.com>
Pascal Hofstee <caelian@gmail.com>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
backyard <backyard1454-bsd@yahoo.com>
Andris Raugulis <endrju@null.lv> <endrju@null.lv>
Eric L. Chen <d9364104@mail.nchu.edu.tw>
Pawel Worach <pawel.worach@gmail.com>
QuiRK on #freebsd-gnome
Shane Bell <decept0@gmail.com>
luigi
sajd on #freebsd-gnome
sat
Chris Coleman <chrisc@vmunix.com>
kaeru on #freebsd-gnome
crsd_ via irc.freenode.org/#FreeBSD-GNOME
Joel Diaz <joeldiaz@mac.com>

Enjoy!

Approved by:    portmgr (implicit, kris)

04:58 mezz 

Use the correct mtree when you change the prefix, for example:

        Incorrect: (before)
        ================================
        # cd /usr/ports/x11-toolkits/pango
        # make -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist
        # make PREFIX=/tmp/foo -V MTREE_FILE
        /etc/mtree/BSD.local.dist <-- Here...
        ================================

        Correct: (after)
        ================================
        # cd /usr/ports/x11-toolkits/pango
        # make -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist
        # make PREFIX=/tmp/foo -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist <-- Here...
        ================================

04:24 edwin 

Remove USE_REINPLACE from categories starting with T

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

23:54 marcus 

* Fix some off-by-one errors
* Update our strndup implementation

19:10 marcus 

Use catalog.ports instead of catalog to stoure our DTD info.  The root XML
catalog should only be touched by xmlcatmgr.

01:33 pav 

- Use intlhack

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

08:01 marcus 

Remove the now-redundant MTREE file selection code.  This is handled in
bsd.port.mk.

Requested by:   lesi

19:10 anholt 

- Add the X_WINDOW_SYSTEM={xorg,xfree86-4,xfree86-3} variable to bsd.port.mk,
  and make XFREE86_VERSION map to it.  XFREE86_VERSION is now deprecated.
- Make xorg the default X_WINDOW_SYSTEM on -current.
- Add several new X_*_PORT variables which point to various pieces of X11 based
  on the setting of X_WINDOW_SYSTEM, and make ports use them.
- Add information to CHANGES about how to handle the transition.

PR:             ports/68763
Approved by:    portmgr (marcus)
Approved by:    re (scottl)

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

04:36 marcus 

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

18:12 trevor 

Now gettext 0.12.1 is gettext-old.

23:13 marcus 

Update to 0.3.14.

12:54 trevor 

Use the FIND and XARGS macros introduced in bsd.port.mk 1.391.

13:23 bland 

Fix build on -STABLE.

08:53 marcus 

Convert scrollkeeper over to use the system catalog location.  This helps
to unbreak gtk-doc as well as removes a ton of gross hacks to support
the old location.  Also, import some CVS patches from SK to fix some
potential crashes when installing bad catalogs.

While I tested this with a full SK database rebuild, problems may still
occur.  Please let me know if you encounter any issues with OMF files
after this commit.

20:25 marcus 

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:     kris

05:41 marcus 

Chase the libintl.so shared lib version.

09:46 adamw 

Remove REINPLACE commands that were rolled into gnomehack.

22:58 marcus 

Bump PORTREVISION to pick up -pthread from libxml2.  As of libxml2-2.5.7,
thread support is enabled by default.  This fixes undefined symbol errors
when running scrollkeeper apps.

05:13 marcus 

Update to 0.3.12.

19:44 marcus 

Remove USE_GNOMENG.

06:11 ade 

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

04:20 marcus 

Fix a long-standing bug that required scrollkeeper to build as root.
Instead, make configure check for a file installed by docbook-sk, and
move the catalog creation to a pre-install target.

Prompted by:    Andrew J Caines <A.J.Caines@halplant.com>
Tested by:      myself
                Andrew J Caines <A.J.Caines@halplant.com>

05:03 marcus 

* Allow bento to generate the necessary XML catalogs
* Update the XSL versions

22:08 marcus 

Allow the XML catalogs to be built if BATCH is defined.

Reported by:    Hung Michael Nguyen <nguyenhm16@mac.com>

00:30 marcus 

Fix two long-standing bugs where scrollkeeper would overwrite the
SGML catalogs in favor of its own XML format catalogs as well as prevent
scrollkeeper from making HTTP connections to obtain DTDs for OMF
validation.

PR:     39504 46179
Tested by:      Stephen Hilton <nospam@hiltonbsd.com>
                Mezz bsdforums.org <reigncracks@hotmail.com>

02:43 marcus 

Set the MTREE_FILE explicitly since we're setting PREFIX explicitly.

Modeled after: lang/librep

19:52 marcus 

Add support for Docbook 4.2.

Submitted by:   John Merryweather Cooper <john_m_cooper@yahoo.com>

16:34 marcus 

Apply the vendor patch for the recent security exploit.

See http://online.securityfocus.com/bid/5602/info/ for more details.

17:07 marcus 

GNOME has just changed the layout of their FTP site.  This resulted in
making all the distfiles unfetachable.  Update all GNOME ports that fetch
from MASTER_SITE_GNOME to fetch from the correct location.

04:03 marcus 

Attempt to fix a security bug in scrollkeeper in which the code will follow
symlinks when attempting to locate a temp file.  Note, this is not the
author's patch, but one of my own.  I think this should fix it, but I'm
not sure if I'm missing something.  The patch is based on the description
from securityfocus.com.

See http://online.securityfocus.com/bid/5602/info/ for more details.

Reported by:    Daniel Harris <dh@askdh.com>

15:52 marcus 

We backup the original SGML catalog files before converting them to XML.
When we uninstall scrollkeeper, revert back to the original catalog files
so the dependecny chain has a better chance of being preserved.  Bump
PORTREVISION.

PR:             41300

17:32 marcus 

Add an explicit dependency on docbook-xml to get around a problem where
the implicit dependency fails due to the catalog file not being removed
when docbook-xml is deleted.

PR:             41300

16:22 ade 

Chase shlib rev of devel/gettext

Submitted by:   lots and lots
Pointy hat to:  ade

14:51 marcus 

Update to 0.3.11.

17:16 sobomax 

Convert all core GNOME1 components and some of the most popular GNOME1
apps to bsd.gnomeng.mk. The goal is to make GNOME1 framework more modular,
which will allow to use GNOME1 apps with GNOME2 desktop as well as considerably
reduce langht of dependency chains for GNOME1 ports (for example after this
commit AbiWord's dependency chain was reduced by 7 ports from 57 to only
50, while Gnumeric's - from 60 to 53 and so on).

The most of the GNOME1 apps are still not converted, so that lot of work is
still ahead.

Please report any unusual problems to gnome@FreeBSD.org.

Discussed with: marcus
Reviewed by:    marcus

04:51 marcus 

Allow the pkg-install script to traverse symbolic links looking for DTD files.
This fixes a problem where /usr/local might be a symlink.

Reported by:    Eric W. Bates <ericx@vineyard.net>

10:52 marcus 

Forced commit to test cvs email.

08:18 sobomax 

Add USE_REINPLACE where appropriate.

19:23 marcus 

Update to 0.3.9.

Approved by:    silence from the GNOME user group

06:28 marcus 

Chase the _right_ version number for libintl.

06:27 marcus 

Add dependency on gettext after it was removed from gmake.

Reported by:    bento

21:54 marcus 

Revert back to 0.2 to fix some conflicts with the GNOME 1.4 OMF files.
Also, fix it so scrollkeeper 0.2 will produce a correct XML
database.  Bump PORTEPOCH.

scrollkeeper 0.3.x will be looked at further to see if there is a good way
to make it work with both GNOME 1.4 and GNOME 2.0.

PR:             38581

05:09 marcus 

Update to 0.3.6.

With this new version, GNOME 2.0 documentation works, and scrollkeeper
updates for GNOME 1.x applications work as well.  I have tested builds
of most of the GNOME 1.x applications, and none of them fail.

Reviewed by:    sobomax

07:56 sobomax 

Use `@unexex /bin/rm' to remove symlinks to dirs, otherwise weird things  
happen and as a result bento can't build gnomelibs package.    

17:36 ade 

SWitch maintainership of core GNOME ports to a small group of   committers
(gnome@FreeBSD.org), since this is now definitely too big   for just one person.
   

18:06 ade 

Use a PREFIX hack (from lang/librep) instead of USE_X_PREFIX (which has   a few
extra undesired consequences)    

17:27 ade 

Fix a number of issues with scrollkeeper, install things in the right   places
(see Makefile for more details), fix a bug, bump PORTREVISION    

17:33 sobomax 

Add scrollkeeper 0.2, an Open Document Cataloging Project.