FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

Please give me your LTO-4 or better tape library and I'll put it to good use.
Port details
p5-HTTP-Server-Simple-Recorder Mixin to record HTTP::Server::Simple's sockets
0.03_1 www on this many watch lists=0 search for ports that depend on this port Find issues related to this port Report an issue related to this port
Maintainer: tobez@FreeBSD.org search for ports maintained by this maintainer
Port Added: 27 Dec 2005 10:58:08
Also Listed In: perl5
License: not specified in port
This module allows you to record all HTTP communication between an
HTTP::Server::Simple-derived server and its clients.  It is a mixin, so
it doesn't itself subclass HTTP::Server::Simple; you need to subclass
from both HTTP::Server::Simple::Recorder and an actual
HTTP::Server::Simple subclass, and HTTP::Server::Simple::Recorder should
be listed first.

WWW: http://search.cpan.org/dist/HTTP-Server-Simple-Recorder/
SVNWeb : Homepage : Distfiles Availability : PortsMon

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:
  1. p5-HTTP-Server-Simple>=0 : www/p5-HTTP-Server-Simple
  2. p5-Test-HTTP-Server-Simple>=0 : www/p5-Test-HTTP-Server-Simple
  3. p5-IO-Tee>=0 : devel/p5-IO-Tee
  4. perl5.18.4 : lang/perl5.18
Runtime dependencies:
  1. p5-HTTP-Server-Simple>=0 : www/p5-HTTP-Server-Simple
  2. p5-Test-HTTP-Server-Simple>=0 : www/p5-Test-HTTP-Server-Simple
  3. p5-IO-Tee>=0 : devel/p5-IO-Tee
  4. perl5.18.4 : lang/perl5.18

This port is required by:

for Build for Run * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

To install the port: cd /usr/ports/www/p5-HTTP-Server-Simple-Recorder/ && make install clean
To add the package: pkg install www/p5-HTTP-Server-Simple-Recorder


Configuration Options
     No options to configure

USES:
perl5

Master Sites:
  1. ftp://ftp.auckland.ac.nz/pub/perl/CPAN/modules/by-module/HTTP/
  2. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/HTTP/
  3. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/HTTP/
  4. ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/HTTP/
  5. ftp://ftp.kddlabs.co.jp/lang/perl/CPAN/modules/by-module/HTTP/
  6. ftp://ftp.mirrorservice.org/sites/cpan.perl.org/CPAN/modules/by-module/HTTP/
  7. ftp://ftp.sunet.se/pub/lang/perl/CPAN/modules/by-module/HTTP/
  8. http://backpan.perl.org/modules/by-module/HTTP/
  9. http://cpan.metacpan.org/modules/by-module/HTTP/
  10. http://distcache.FreeBSD.org/ports-distfiles/
  11. http://ftp.jaist.ac.jp/pub/CPAN/modules/by-module/HTTP/
  12. http://ftp.twaren.net/Unix/Lang/CPAN/modules/by-module/HTTP/
  13. http://www.cpan.dk/modules/by-module/HTTP/
  14. http://www.cpan.dk/modules/by-module/HTTP/
  15. http://www.cpan.org/modules/by-module/HTTP/

Number of commits found: 13

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
26 Nov 2014 13:08:38
Original commit files touched by this commit  0.03_1
Revision:373448
mat search for other commits by this committer
Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
05 Jan 2014 13:23:33
Original commit files touched by this commit  0.03
Revision:338767
az search for other commits by this committer
- stage support

Approved by:	portmgr (blanket infrastructure)
20 Sep 2013 23:36:54
Original commit files touched by this commit  0.03
Revision:327776
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
www)
05 Aug 2013 15:05:30
Original commit files touched by this commit  0.03
Revision:324276
az search for other commits by this committer
- Convert to new perl framework
- Trim Makefile header

Approved by:	tobez@ (maintainer)
03 Jun 2012 05:56:20
Original commit files touched by this commit  0.03
az search for other commits by this committer
- Remove SITE_PERL from *_DEPENDS

Approved by: maintainer (tobez@ via IM)
21 Jan 2012 17:40:15
Original commit files touched by this commit  0.03
eadler search for other commits by this committer
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.

Explicit duplication > := > = and this just moves ports one step to the left

Approved by:    portmgr
17 Sep 2011 06:49:29
Original commit files touched by this commit  0.03
sunpoet search for other commits by this committer
- Change PERL_CONFIGURE to "yes" for all values less than or equal to 5.8.0+

With hat:       perl
19 Mar 2011 12:38:54
Original commit files touched by this commit  0.03
miwi search for other commits by this committer
- Get Rid MD5 support
09 Jan 2009 10:34:45
Original commit files touched by this commit  0.03
tobez search for other commits by this committer
Update to 0.03.

Changes: http://search.cpan.org/dist/HTTP-Server-Simple-Recorder/Changes
17 Apr 2008 14:30:31
Original commit files touched by this commit  0.02
araujo search for other commits by this committer
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)
08 Sep 2007 01:11:48
Original commit files touched by this commit  0.02
  Sanity Test Failure
linimon search for other commits by this committer
Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr
22 Jan 2006 02:58:25
Original commit files touched by this commit  0.02
edwin search for other commits by this committer
Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)
27 Dec 2005 10:55:51
Original commit files touched by this commit  0.02
tobez search for other commits by this committer
Add www/p5-HTTP-Server-Simple-Recorder 0.02, a Perl mixin to record all
HTTP communication between an HTTP::Server::Simple-derived server and
its clients.

Number of commits found: 13

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
php5Apr 25
php55Apr 25
php56Apr 25
wordpress*Apr 24
wordpress*Apr 24
wordpress*Apr 24
wordpress*Apr 24
wordpress-zh_CN*Apr 24
wordpress-zh_TW*Apr 24
libtasn1Apr 22
firefoxApr 21
linux-firefoxApr 21
chronyApr 18
sqlite3Apr 18
dulwichApr 17

10 vulnerabilities affecting 33 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24692
Broken 252
Deprecated 49
Ignore 522
Forbidden 1
Restricted 204
No CDROM 95
Vulnerable 21
Expired 0
Set to expire 42
Interactive 0
new 24 hours 1
new 48 hours2
new 7 days14
new fortnight29
new month109

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.