SOGo is a fully supported and trusted groupware server with a focus on
scalability and open standards. It provides a rich AJAX-based Web
interface and supports multiple native clients through the use of
standard protocols such as CalDAV, CardDAV and GroupDAV.
===> The following configuration options are available for sogo2-2.4.3_3:
ACTIVESYNC=off: Enable support for ActiveSync protocol
===> Use 'make config' to modify these settings
SOGo 2 was installed
In order to run the sogo daemon (sogod), you will need to create and configure
the main configuration file, e.g.:
cp -p ${LOCALBASE}/etc/sogo/sogo.conf.sample ${LOCALBASE}/etc/sogo/sogo.conf
And to allow the service to run at system startup, add sogod_enable="YES"
in your rc.conf.
If you need to allow email alarms (notifications) for calendar events, copy
the sample credentials file:
cp -p ${LOCALBASE}/etc/sogo/ealarms-notify.creds.sample \
${LOCALBASE}/etc/sogo/ealarms-notify.creds
Then replace the username:password with appropriate credentials for SMTP AUTH
sending capabilities.
Then copy the sample cron executable:
cp -p ${LOCALBASE}/GNUstep/Local/Tools/Admin/cron-ealarms-notify.sample \
${LOCALBASE}/GNUstep/Local/Tools/Admin/cron-ealarms-notify
And edit this file to suit your server timezone (e.g. TZ=Africa/Algiers).
Then add the following lines to the root users' crontab (crontab -e):
# Process email reminders every minute
* * * * * ${LOCALBASE}/GNUstep/Local/Tools/Admin/cron-ealarms-notify
If you need to automatically purge vacation messages from users sieve scripts,
copy the sample credentials file:
cp -p ${LOCALBASE}/etc/sogo/expire-autoreply.creds.sample \
${LOCALBASE}/etc/sogo/expire-autoreply.creds
Then replace the username:password with appropriate credentials for your
IMAP servers' sieve account.
Then copy the sample cron executable:
cp -p ${LOCALBASE}/GNUstep/Local/Tools/Admin/cron-expire-autoreply.sample \
${LOCALBASE}/GNUstep/Local/Tools/Admin/cron-expire-autoreply
And edit this file to suit your server timezone (e.g. TZ=Africa/Algiers).
Then add the following lines to the root users' crontab (crontab -e):
# Vacation messages expiration
# The credentials file should contain the sieve admin credentials (username:passwd)
0 0 * * * ${LOCALBASE}/GNUstep/Local/Tools/Admin/cron-expire-autoreply
For more information about using SOGo, visit:
http://www.sogo.nu/downloads/documentation.html
all: drop support for FreeBSD 13, mips and risc64sf
Reviewed by: many (*)
Differential Revision: https://reviews.freebsd.org/D55624
Differential Revision: https://reviews.freebsd.org/D55642 (merged in from bofh)
many (*)
acm arrowd brooks cmt dch decke dinoex eduardo fluffy fuz gahr garga
jbeich joerg jrm kai kenrap martymac matthew mfechner michaelo mizhka
nobutaka pkubaj se tagattie thj
Anton Saietskii
GenericRikka
Gert Doering
Jan Bramkamp
Oleh Hushchenkov
Oleksandr Kryvulia
Ralf van der Enden
Yamagi
desktop kde python tcltk office
Fix WWW in parent/child ports
Many of the WWW are overwritten later which means the wrong value
is used. This did not happen before where the children were either
a) just using the pkg-descr from the parents
b) or had their own separate pkg-descr with custom WWW
Use WWW?= in parents when the child's WWW is different.
Children that use the same WWW as the parent can just inherit it,
i.e., the child WWW can be removed.
Approved by: portmgr (implicit)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org>
(Only the first 15 lines of the commit message are shown above )
*/*: Remove redundant '-[0-9]*' from CONFLICTS
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".
Approved by: portmgr (blanket)
Update a few GNUstep ports:
* devel/gnustep-make: Update to 2.8.0
* lang/gnustep-base: Update to 1.27.0
* x11-toolkits/gnustep-back: update to 0.28.0
* x11-toolkits/gnustep-gui: update to 0.28.0
Also bump PORTREVISION on dependent ports.
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Move Objective-C ports to the v2 GNUstep ABI.
* Bump the LLVM revision used for GNUstep to 7, the minimum to support
the new ABI.
* GNUstep-back does not work with lld, so mark it to use Gold (BFD LD
doesn't seem able to link Objective-C things).
* Turn off some annoying debug logs in GNUstep back, which generate
several messages per second when you move the mouse. These should
never have been enabled in a release build anyway.
* Downgrade Cenon to 4.0.2. This was the last version to actually work
with GNUstep (the later ones use XCode >= 5 .xib files, which GNUstep
can't parse).
* Update gorm to git head. The current release doesn't work with the
new Objective-C ABI, but -head has the patches to fix it.
* Update PikoPixel and add it to the gnustep-app meta-package.
* Update the three core GNUstep packages to the latest release.
* Update gnumail and pantomime to the latest release and fix a linking
error with the new ABI.
* Update GNUstep FTP to the latest version.
Reviewed by: bapt (previous version)
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Fix configure options for gnustep-make
We were not setting the flag to select the GNUstep ABI, so were defaulting to
using the GCC-compatible version, which was likely to trigger a lot of subtle
bugs. This was noticed when C++ exceptions thrown through Objective-C stack
frames caused segfaults.
Update GNUstep core libraries.
Update the default Objective-C compiler.
Fix various build failures in GNUstep ports from newer versions of the GNUstep
core libraries and from changes to GNUstep Make.
Update various ports that use GNUstep and bump the portrevision of the ones
that haven't had a new release.
