non port: x11-toolkits/linux-gtk/Makefile |
Number of commits found: 43 |
Tuesday, 31 Jul 2012
|
13:15 bsam
Use asolute path for PLIST (prepend ${PKGDIR} to PLIST).
It's more safe that a relative path.
Inspired by PR: ports/169702
Submitted by: Tijl Coosemans <tijl@coosemans.org>
Discussed at: freebsd-emulation
|
Saturday, 14 Apr 2012
|
20:24 netchild
Set the expiration date for all ports which depend upon linux_base-fc4 to
the EoL of the last 7.x release. The 7.x branch is the only supported
FreeBSD version not yet at his EoL which needs a linux 2.4 based linuxulator
environment (linux_base-f10 doesn't work there).
I didn't bump the portrevision, this is mostly done as a hint for ports
committers to tell them that at least the emulation@-owned ports need
to stay until then (even the forbidden ones). The dependent ports need to
go at the same time, but are free to be deleted before.
Discussed with: bsam
|
Monday, 7 Mar 2011
|
15:08 ehaupt
Unify maintainer address for emulation ports.
(freebsd-emulation@FreeBSD.org -> emulation@FreeBSD.org)
Discussed with: netchild (emulation)
|
Thursday, 3 Mar 2011
|
09:26 ehaupt
Add a more reliable mirrors for fc4 and f10 linux emulation ports.
Triggered by: distilator
Reviewed by: netchild (emulation)
|
Tuesday, 2 Jun 2009
|
21:15 bsam
. add linux-f10 ports to the rank of CONFLICTS for linux-fc4 ports;
. bump PORTREVISIONs.
|
Wednesday, 1 Apr 2009
|
10:10 bsam
Finish repocopies of new linux-f8 infrastructure ports:
. add CONFLICTS to 47 original ports;
. bump PORTREVISIONs for all of them;
. pet portlint for 2-3 ports (misplaced PORTREVISION).
|
Thursday, 19 Mar 2009
|
17:28 bsam
Welcome to the new linux ports infrastructure which allows using
both current (fc4) and future linux (f8) distributions at one
ports tree.
The patch contains full changes to ports/Mk files and all ports involved.
But only infrastructure is changed. The resulting packages are the same as
before. Hence no need to bump PORTREVISIONs.
The idea was taken from bsd.gnome.mk and others.
More than 130 ports are switched to follow a new linux infrastructure
introduced by changes to bsd.port.mk, bsd.linux-rpm.mk and a new
bsd.linux-apps.mk.
Thanks for all who was involved and helped me with this work.
And help from Alexander Leidinger was incredible.
Other changes are coming. Stay tuned!
PR: ports/132510
Submitted by: bsam (me)
Exp-run by: portmgr (pav)
|
Saturday, 19 Apr 2008
|
17:56 miwi
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
Friday, 14 Jul 2006
|
22:08 bsam
o remove locale dirs from pkg-plist (those locales are taken care of
by linux_base-fc4);
o bump PORTREVISION.
Pointed out by: pointyhat (i386-4-latest)
Approved by: netchild (mentor, implicit)
|
Tuesday, 27 Jun 2006
|
12:35 bsam
o fix pkg-plist at linux_base-fc4 to unbrake pointyhat building
of x11-toolkits/linux-gtk ;-)
o update x11-toolkits/linux-gtk to a newer version (FC3 -> FC4)
o bump PORTREVISION for both ports
Pointed out by: pointyhat
Approved by: netchild (mentor, implicit)
|
Tuesday, 16 May 2006
|
18:04 netchild
Fix plist.
Noticed by: gohan (krismail)
|
Monday, 1 May 2006
|
17:28 netchild
- convert to use bsd.linux-rpm.mk (get rid of include of linux-gtk/Makefile) [1]
- use fixed plists [1]
- category "linux" added to those ports without it [1]
- update some ports to a recent FC3 one [1]
- remove plists/... for Alpha (there's no support since linux_base-8 for
Alpha anymore)
- don't hardcode version numbers in some plists, use PLIST_SUB instead
(any errors are mine, don't keep them, send them to me)
Regarding linux-ungif I declare a maintainer timeout (one month, Boris tried
to contact the maintainer) and also pull the "sweeping commit"-card (the
port which it uses as some kind of master port can not be used for this
anymore). Besides this, I don't think he will be upset when other people
do the work instead of adding an entry to his TODO list. :-)
This commit brings us just before the switch of the default linux base
port to the fc3 one, modulo some bugs which may appear. So:
Beta testers wanted!
To test:
sed -i.old -e 's:linux-XFree86-libs:linux-xorg-libs:' /usr/ports/Mk/bsd.port.mk
echo OVERRIDE_LINUX_BASE_PORT=fc3 >> /etc/make.conf
portupgrade -f -o emulators/linux_base-fc3 -f linux_base-8
portupgrade -o x11/linux-xorg-libs linux-XFree86-libs
portupgrade linux-\*
The first two steps are necessary to switch to fc3 as the new default linux
base port, the last 3 steps to upgrade to fc3.
And feel free to send a big "Thank you!" to Boris, he did a lot of the work!
I just provided some hints and answered some questions (besides from
committing all the necessary changes for FC3 and doing some minor
changes+comments/improvements to/of his work), even when he tries to tell
you something else. ;-)
Submitted by: Boris Samorodov <bsam@ipt.ru> [1]
|
Saturday, 3 Dec 2005
|
14:45 netchild
- update to 1.2.10
- use the fedora legacy site before the rpm mirrors (should speed up the
fetch operation)
- allow to add SRC RPM's (not used in this port, since it also serves
as a framework for other ports which would break then, I hope this
will be fixed soon by seperating the framework from this Makefile)
|
Friday, 25 Nov 2005
|
23:11 pav
- Hack in fedoralegacy.org which seems to carry RedHat 7.2, 7.3, 8 and 9 RPMs
Fixes fetching of x11-fonts/linux-urw-fonts
|
Tuesday, 22 Nov 2005
|
18:50 netchild
Allow to replace with an old package (useful in the portupgrade case).
|
Friday, 17 Jun 2005
|
22:59 netchild
Mega-patch to cleanup the ports infrastructure regarding our linux bits:
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by: portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on: ports cluster (kris)
Reviewed by: silence on emulation@
Superseedes PR: 69997
Maintainer approval from:
chris@chrisburkert.de
cracauer@cons.org
des
girgen
jamie@bishopston.net
mezz
mi
nivit@users.sf.net
pat
simond@irrelevant.org
riggs@rrr.de
Udo.Schweigert@Siemens.com
|
Tuesday, 1 Mar 2005
|
21:51 trevor
Respect the user's USE_LINUX setting.
|
Wednesday, 16 Feb 2005
|
17:51 obrien
1. uses "ARCH" instead of "MACHINE_ARCH"
2. allow "ARCH" to be over-ridable.
3. fix ordering to better follow Mk/bsd.port.mk guidelines
XXX, I don't like setting "--ignorearch", but some ports just would not
install on amd64 w/o it. Even with the 'ARCH' override, installing these
RPM's would complain about the system being the wrong architecture.
|
Friday, 31 Dec 2004
|
18:24 netchild
Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX=<value> specifies a dependency upon
emulators/linux_base-<value>, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portrevision of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas <scirocco@tasam.com> [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
|
Sunday, 21 Nov 2004
|
16:31 trevor
Allow slave ports to override DIST_SUBDIR.
PR: 74186
Submitted by: Jin-Shang Tseng
|
Monday, 26 Jul 2004
|
12:13 vs
Remove references to mirror.ac.uk
PR: ports/69481
Submitted by: Tim Bishop
|
Wednesday, 11 Feb 2004
|
16:57 trevor
forced commit: previous change was from
PR: 62682
Submitted by: Volker Stolz of RWTH Aachen
|
16:41 trevor
The rpm executable is needed in do-install, so having it as I did
as "BUILD_DEPENDS?=" is illogical. Instead use "BUILD_DEPENDS+=".
|
Wednesday, 4 Feb 2004
|
05:10 marcus
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
|
Thursday, 4 Dec 2003
|
03:07 trevor
Allow slave ports to set their own ONLY_FOR_ARCHS (fixes a problem
with my i386-only slave ports, noticed by kris in bento logs).
|
Wednesday, 19 Nov 2003
|
15:31 trevor
Make BUILD_DEPENDS changeable by slave ports.
|
13:13 trevor
Make MD5_FILE changeable by slave ports which install "noarch" RPMs.
|
02:24 trevor
Let slave ports set BASEVERSION and PLIST.
|
Saturday, 27 Sep 2003
|
01:01 edwin
KATO mega patch
- ECHO -> ECHO_MSG
For some ports:
- pre-fetch -> pre-everything
- ECHO -> ECHO_CMD
PR: ports/56820-56858
Submitted by: KATO Tsuguru <tkato@prontomail.com>
|
Friday, 4 Apr 2003
|
05:34 lioux
After repo copy from graphics category to newly create multimedia
one, update all appropriate references (*_DEPENDS, comments, etc):
ports/graphics/libfame --> ports/multimedia/libfame
ports/graphics/libquicktime --> ports/multimedia/libquicktime
ports/graphics/mpeg --> ports/multimedia/mpeg
ports/graphics/mpeg_encode --> ports/multimedia/mpeg_encode
ports/graphics/mpeg_play --> ports/multimedia/mpeg_play
ports/graphics/mtv --> ports/multimedia/mtv
ports/graphics/smpeg --> ports/multimedia/smpeg
ports/graphics/totem --> ports/multimedia/totem
ports/graphics/transcode --> ports/multimedia/transcode
ports/graphics/xanim --> ports/multimedia/xanim
ports/graphics/xmps --> ports/multimedia/xmps
Repo copied by: cvs (joe)
Approved by: portmgr (self & no objections)
|
Thursday, 20 Feb 2003
|
19:31 knu
De-pkg-comment.
|
Saturday, 23 Nov 2002
|
23:22 maho
PORTREVISION should be PORTREVISION?=2, otherwise
PORTREVISION of satellite ports cannot be set.
Advised and approved by: knu (mentor)
|
Saturday, 3 Aug 2002
|
10:11 mita
MAINTEINER-suggested version up.
Install RPMs from RedHat 7.1 instead of RedHat 6.1.
Thanks to this upgrade, many ports (pips, bjfilter,..)
is internationalized without *-linux-locale port.
I have verified this modification imposed no fatal error to
the depending ports.
Submitted by: Maintainer (taoka@FreeBSD.org)
Reviewed by: ports-jp
|
Wednesday, 7 Nov 2001
|
16:33 taoka
Change from MASTER_SITES= to MASTER_SITES?= to be able to overwrite in slave
ports
|
Sunday, 23 Sep 2001
|
20:50 dwcjr
Remove ftp.freesoftware.com from MASTER_SITES of ports since it no longer
exists.
|
Tuesday, 20 Mar 2001
|
20:28 obrien
`rpm' and `rpm2cpio' have been repocopied from "misc" to "archivers".
|
Thursday, 8 Mar 2001
|
01:01 taoka
This port is a master port for a lot of ports whose maintainers are different.
So "MAINTAINER=" should be "MAINTAINER?=".
|
Wednesday, 7 Mar 2001
|
22:12 sf
add missing files under /etc/gtk for i386. remove directories if empty(note:
this port does not use mtree).
|
21:02 sf
NO_MTREE=yes, PREFIX=/compat/linux, RUN_DEPENDS=linux_base -->
USE_LINUX_PREFIX=yes
|
Thursday, 23 Nov 2000
|
11:56 sobomax
Ditch out "Version required" from comments section.
|
Wednesday, 22 Nov 2000
|
18:52 gallatin
The linux libc on alpha is /lib/libc.so.6.1 not /lib/libc.so.6
|
Wednesday, 1 Nov 2000
|
09:55 obrien
Add Alpha bits.
|
Monday, 12 Jun 2000
|
08:54 sobomax
Update MASTER_SITES to make distfile fetchable.
|
Number of commits found: 43 |