x11-wm/lxqt: Update to 2.0.0
- Update mostly lxqt ports to 2.0.x
- Update some lxqt dependencies to latest version
- Update Mk/Uses/lxqt.mk file for support some legacy and new lxqt ports
- Add devel/libdbusmenu-lxqt
- Add x11/libfm-qt6
- Add devel/libqt6xdg
- Add sysutils/libsysstat-qt6
- Add devel/lxqt2-build-tools
- Add sysutils/lxqt-qt6plugin
- Add deskutils/xdg-desktop-portal-lxqt
- Add x11-toolkits/qtermwidget-qt5 for no break x11/coreterminal
- Pass maintainership to new lxqt@ group
- Few other modifications
PR: 278905
Approved by: jsm
x11/qterminal: unbreak after 020693c166d1
CMake Error at
/usr/local/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:230
(message):
Could NOT find Perl (missing: PERL_EXECUTABLE)
PR: 266007
Reported by: antoine (via exp-run)
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Add USES=xorg USES=gl, ports categories x
Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above )
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
Multiple ports:
Change maintainer email bacon4000@gmail.com to jwb@FreeBSD.org
Remove Created by comments for same user
Approved by: jrm (mentor)
Differential Revision: https://reviews.freebsd.org/D14128
x11/qterminal: Update to 0.8.0
While here, set maintainer to Jesper Schmitz Mouridsen
<jesper@schmitz.computer>, maintainer of other lxqt related ports.
PR: 223224
Submitted by: Olivier Duchateau <duchateau.olivier@gmail.com>
Approved by: Jason Bacon <bacon4000@gmail.com> (maintainer)
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
x11/qterminal: Adjust LDFLAGS to support DragonFly
The ulog library is FreeBSD-specific so make it conditional based on
OPSYS to fix linking on DragonFly.
Approved by: DF blanket
Let USES=localbase add -L${LOCALBASE}/lib to LIBS instead of LDFLAGS.
USES=localbase:ldflags can be used to set LDFLAGS. Normally LDFLAGS
appears too early on the command line causing some ports to link with
their own libraries in LOCALBASE (if installed) instead of WRKSRC.
Also make use of _USES_POST so -L${LOCALBASE}/lib is added as late as
possible after anything a port Makefile might set. Use _USES_POST
instead of .include in libedit.mk and libarchive.mk so things like
'USES=libedit localbase:ldflags' work correctly.
Fix some issues with LIBS in some ports.
Switch ports that don't support LIBS to localbase:ldflags.
PR: 212987
Exp-run by: antoine
Approved by: portmgr (antoine)
