xlockmore 5.34 x11 =56

Like XLock session locker/screen saver, but just more
Maintained by: marius@nuenneri.ch
Port Added: unknown
License: not specified in port

xlock locks the X server till the user enters their pass-
word at the keyboard.  While xlock is running, all new
server connections are refused. The screen saver is disabled.
The mouse cursor is turned off.  The screen is blanked and a
changing pattern is put on the screen.  If a key or a mouse
button is pressed then the user is prompted for the password
of the user who started xlock.

If the correct password is typed, then the screen is
unlocked and the X server is restored.  When typing the
password Control-U and Control-H are active as kill and
erase respectively.  To return to the locked screen, click
in the small icon version of the changing pattern.

WWW: http://www.tux.org/~bagleyd/xlockmore.html

CVSWeb : Sources : Main Web Site : Distfiles Availability : PortsMon

---

Slave ports

japanese/xlockmore

---

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.
Required To Build: x11/libX11, x11-toolkits/libXaw, x11/libICE
Required To Run: x11/libX11, x11-toolkits/libXaw, x11/libICE
Required Libraries: print/freetype2
There are no ports dependent upon this port

---

To install the port: cd /usr/ports/x11/xlockmore/ && make install clean
To add the package: pkg_add -r xlockmore

---

Configuration Options

===> The following configuration options are available for xlockmore-5.34:
     MESAGL=off (default) "Enable Mesa 3D (for GL modes)"
     MB=off (default) "Enable Xmb function series"
     SYSLOG=off (default) "Enable syslog logging"
     DISABLE_ALLOW_ROOT=off (default) "Allows users to turn off allowroot"
     NICE_ONLY=off (default) "Enable only low cpu modes"
     BLANK_ONLY=off (default) "Enable blank mode only (boring)"
     PAM=off (default) "Enable PAM authentication support"
     BAD_PAM=off (default) "Xlock will ask PAM with root rights"
     GTK2=off (default) "Build Gtk2 graphical shell"
     XLOCK_GROUP=off (default) "Allow xlock group to logout"
     TIME_BOMB=off (default) "Allow autologout"
     CUSTOMIZATION=off (default) "Allow tune through resource file"
===> Use 'make config' to modify these settings

---

Master Sites:

ftp://ibiblio.org/pub/Linux/X11/screensavers/

http://www.tux.org/~bagleyd/xlock/xlockmore-5.34/

http://critical.ch/distfiles/

http://energy.critical.ch/distfiles/

http://snow.critical.ch/distfiles/

http://www.bluestop.org/distfiles/

http://fneu.fr/distfiles/

ftp://ftp.c.saper.info/distfiles/

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/

Update to 5.34

PR:             ports/160232
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>
Approved by:    maintainer timeout (17 days)

- Update to 5.33

PR:             ports/156730
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>
Approved by:    Marius Nuennerich <marius@nuenneri.ch> (maintainer)

- make CATEGORIES overridable, this fixes PKGORIGIN for japanese/xlockmore

- Get Rid MD5 support

- Add missing dependency on freetype2[1]
- While here make portlint happy

PR:             ports/150210 [1]
Submitted by:   Craig Leres <leres _at_ ee.lbl.gov> [1]
Approved by:    Marius Nuennerich <marius _at_ nuenneri.ch> (maintainer) [1]

Update to 5.31

PR:             ports/147990
Submitted by:   UMENO Takashi <umeno at rr.iij4u.or.jp>
Approved by:    maintainer
Feature safe:   yes

- Update to 5.29.1

PR:             139676
Submitted by:   Marius Nuennerich <marius@nuenneri.ch> (maintainer)

- Update to 5.29

PR:             ports/138170
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>
Approved by:    maintainer,     mentors(implicit)

- Pass maintainership to marius@nuenneri.ch

Submitted by:   marius@nuenneri.ch (ports@ mailing list)

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

- Allow mesagl modes on amd64

PR:             ports/129295
Submitted by:   Roland Smith <rsmith@xs4all.nl>

- Update to 5.27

PR:             129136
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp> (maintainer)

- Update to 5.26.1
- Add additional master sites

Do not link against libttf (from print/freetype) if it happens to be
installed.

- Add missing dependens
- Bump PORTREVISION

Submitted by:   pointyhat via pav

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

Get rid of USE_X_PREFIX.

- Fix build when MESAGL enabled is

Submitted by:   Mamoru Iwaki <iwaki@eng.niigata-u.ac.jp> (via ports@ ml)

- Fix Mesa/GL modes

PR:             121428
Submitted by:   Oliver Fromme <olli@secnetix.de>

- Update to 5.25
- Update MASTER_SITES

PR:             117102
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

- Introduce new OPTIONS, including Gtk2 option

PR:             ports/113700
Submitted by:   Rashid N. Achilov <achilov-rn@askd.ru>

- Update to 113514

PR:             113514
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Remove support for xfree86-3

PR:             ports/106666
Submitted by:   vd
With hat:       portmgr

- Update to 5.23

PR:             ports/104668
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

- Update to 5.22

PR:             ports/96348
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

- BAD_PAM option now selectable using configure, rather than directly
  editing config.h.

PR:             91907
Submitted by:   Tobias Roth <ports@fsck.ch>

- Update to 5.21

PR:             91626
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

xlockmore port improvements patch

        Some time ago I send PR about PAM support in xlockmore. Now
        I spend some time to work on xlockmore. I found that PAM
        works fine by default (with --enable-pam), but only with
        modules that does not requires root rights to authenticate.
        But almost all PAM configurations ends with pam_unix call.
        Here is the trouble. xlock drops root privileges after
        startup. I use BAD_PAM again to wrap this setuid().  IMHO,
        usage of BAD_PAM is right in this case. Also abort trap was
        fixed. Here was error in PAM_conv function. I'll send
        explanations of changes and situation to xlock-discuss
        mailing list later. May be fixes will be committed into
        next release of xlockmore.

- Add WITH_NICE_ONLY knob to enable only low-cpu modes.

PR:             ports/76358
Submitted by:   Yuri Y. Bushmelev <jay-dev@simcom.ru>

- Add SHA256

- Add WITH_PAM knob.

PR:             ports/89060
Submitted by:   Ronald Klop <ronald@cs.vu.nl>

- Distfile was rerolled, no content change

Reported by:    krismail
Submitted by:   Andrew P. <infofarmer@gmail.com>

- Update to 5.20.1

PR:             ports/88328
Submitted by:   Andrew Pantyukhin <infofarmer@gmail.com>

Update to 5.19

PR:             ports/85068
Submitted by:   UMENO Takashi

. Update to 5.18.

PR:             82063
Submitted by:   Björn König <bkoenig@cs.tu-berlin.de>

. Update to 5.17.

PR:             81422
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Update to 5.16
- Use PLIST_FILES (me)

PR:             ports/79516
Submitted by:   UMENO Takashi

Update to 5.15

PR:             ports/76848
Submitted by:   UMENO Takashi

Update to 5.14.1

PR:             ports/74466
Submitted by:   UMENO Takashi

Add MASTER_SITES for more redundancy.

- Add the X_WINDOW_SYSTEM={xorg,xfree86-4,xfree86-3} variable to bsd.port.mk,
  and make XFREE86_VERSION map to it.  XFREE86_VERSION is now deprecated.
- Make xorg the default X_WINDOW_SYSTEM on -current.
- Add several new X_*_PORT variables which point to various pieces of X11 based
  on the setting of X_WINDOW_SYSTEM, and make ports use them.
- Add information to CHANGES about how to handle the transition.

PR:             ports/68763
Approved by:    portmgr (marcus)
Approved by:    re (scottl)

Update port: x11/xlockmore to 5.13

        Update port: x11/xlockmore to 5.13

PR:             ports/69379
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

- Update to 5.12

PR:             ports/66067
Submitted by:   UMENO Takashi <umeno@belldandy.unnumbered.net>

Tidy up whitespace.

Add WITH_SYSLOG knob.

Submitted by:   Katsura Matsumoto <katsura@cc.osaka-kyoiku.ac.jp>
PR:             62629

Fix build on AMD64 by disabling MESAGL.

SIZEify.

unbreak gcc3 WITH_MB.

. Update to 5.11.1.

PR:             61159
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

Update to 5.11 [1]
Fix build if MAKE_KERBEROS4 defined [2]
Make cosmetic changes for pkg-descr, add WWW tag [3]

Spotted by:     Chris <chris-gnats34@randomcamel.net> [2]
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp> [1],
                Volker Stolz <stolz@i2.informatik.rwth-aachen.de> [2],
                osa [3]
PRs:            59882, 60925

Make some variables ?= because they might be set by slave ports
(for example, japanese/xlockmore)

PR:             ports/59664 (related)

. Update to 5.10. [1]
. Add some knobs (WITH_MB, XLOCKMORE_LANG). [1]
. USE_MESA -> USE_GL.

PR:             59139 [1]
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp> [1]

Update to 5.09.

PR:             ports/55812
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

Upgrade to 5.08.2.

PR:             52001 52512
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

Disown this port.

Upgrade to 5.07.1.

PR:             51428
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

Use REINPLACE_CMD.

PR:             50843
Submitted by:   Ulrich Spoerlein <q@uni.de>

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Update to xlockmore-5.06

PR:             46050
Submitted by:   UMENO Takashi <umeno@rr.iij4u.or.jp>

Update to version 5.04.

Approved by:    tg (maintainer)

Don't use bitmap we don't have.

Submitted by:   Christian Chen <oistrakh@earthlink.net>

Fix building when MAKE_KERBEROS4 is defined.

Upgrade to 5.03.

Upgrade to 5.02.    

The `--with{,out}-mesagl' option to configure is spelled `--with{,out}-mesa'.   

Add ${KRB5_HOME}/include to $CFLAGS and ${KRB5_HOME}/lib to   $XLOCKLIBS for
people using kerberos5.    

Link against ${PTHREAD_LIBS} if we want MESAGL. Mesa is now compiled   with
thread support also on XFree86-3 systems.    

Add a knob to disable the `allow-root' functionality, which lets root   unlock
the screensaver regardless of the current owner.    

Upgrade to 5.01.    

Add ${PTHREAD_LIBS} to the libs to fix building on XFree86-4.    

Style fixes for ports/x11.    

Upgrade to 5.00.    

Convert category x11 to new layout.  

Use new variable XFREE86_VERSION.    

Upgrade to 4.17.1. This release contains the security fix in patch-sec1.    

Make this at least compile for XFree86-4.0.1.    

Fix a local root exploit in xlock    

Upgrade to 4.17.    

(1) Add new variable, XFREE86_VERSION, to specify which version of       XFree86
(3 or 4) to depend to when USE_XLIB is set.       XFREE86_VERSION defaults to 3
for now, but adventurous users can       override it in /etc/make.conf.  When
XFREE86_VERSION=3, USE_XLIB       will add a dependency to x11/XFree86; when it
is set to 4, the       dependency will be to x11/XFree86-4-libraries.  When     
 XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS       hacks
to avoid messing with XFree86 are turned off.    

15 vulnerabilities affecting 34 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities