brlcad 7.12.6_2 cad =1

CSG modelling system from the US Ballistic Research Laboratory
Maintained by: erik@smluc.org
Port Added: 20 Feb 2005 22:01:29

---

---

BRL-CAD is a powerful Combinatorial/Constructive Solid Geometry (CSG)
solid modeling system that includes an interactive geometry editor,
ray-tracing support for rendering and geometric analysis,
network-distributed framebuffer support, image and signal-processing
tools, and an embedded scripting language.

The package is a collection of over 400 tools and utilities across
over 750,000 lines of source code.  Included is support for various
geometric data format conversions, image and signal processing
capabilities, sophisticated ray-tracing based lighting models, network
distributed ray-tracing, massively parallel ray-tracing, animation
capabilities, data compression, image handling, and interactive 3-D
geometric editing.  Included is an implementation of Weiler's
n-Manifold Geometry (NMG) data structures for surface-based solid
models and photon mapping.


WWW: http://www.brlcad.org/

CVSWeb : Sources : Main Web Site : Distfiles Availability : PortsMon

---

Required To Build: math/jama, devel/gmake, x11/inputproto, x11/libX11, x11-toolkits/libXt, x11/libXi, x11/xproto, x11/libXext, devel/libtool22
Required To Run: x11/libX11, x11-toolkits/libXt, x11/libXi, x11/xproto, x11/libXext
Required Libraries: graphics/png, graphics/urt, x11-toolkits/tk85, graphics/libGL

---

To install the port: cd /usr/ports/cad/brlcad/ && make install clean
To add the package: pkg_add -r brlcad

---

Configuration Options

===> The following configuration options are available for brlcad-7.12.6_2:
     OPTIMIZATION=on (default) "Build with optimizations"
===> Use 'make config' to modify these settings

---

Master Sites:

http://heanet.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://sunet.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://iweb.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://switch.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://surfnet.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://kent.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://freefr.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://voxel.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://jaist.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://osdn.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://nchc.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://transact.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://softlayer.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://internode.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://biznetnetworks.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

http://ufpr.dl.sourceforge.net/project/brlcad/BRL-CAD%20Source/7.12.6/

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with B,C

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to 7.12.6

PR:             127891
Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)

- Mark as BROKEN on CURRENT.

Reported by:    erwin via pointyhat

- After recent commit of MPSAFE TTY layer brlcad builds and runs successfully on
CURRENT, then unbreak it.

PR:             ports/126746
Reported by:    Alexey Shuvaev <shuvaev@physik.uni-wuerzburg.de>

- Mark as BROKEN on -CURRENT.
- Add regression-test.

PR:             ports/124733
Submitted by:   "Pedro F. Giffuni" <pfgshield-freebsd@yahoo.com>
Reviewed by:    lippe
Approved by:    gabor (mentor, implicit)

- Update to 7.12.4

PR:             124105
Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)

- Update to 7.12.2

PR:             ports/123027
Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)

- Update of cad/brlcad from 7.10.4 to 7.12.0
- Removed files: files/patch-src-vas4_vas_io.c (already implemented)
- USE_XORG part already implemented by miwi

PR:             ports/12232
Submitted by:   mm
Approved by:    maintainer timeout

- Fix build after xorg cleanup

Submitted by:   pointyhat

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Fix build with all Tcl 8.5 patchlevels

- Fix build after tcl/tk update
- Bump PORTREVISION

Submitted by:   pointyhat

- Fix build

Submitted by:   pointyhat via erwin/pav

- Use termios, not sgtty

PR:             119096
Submitted by:   Ed Schouten <ed@fxq.nl>
Approved by:    maintainer via irc

- Fix build with tcl 8.5

PR:             119729
Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)
                pointyhat via pav

- Update to 7.10.4
- Fix build after tcl/tk update

PR:             117462
Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)
Approved by:    portmgr (pav)

- Update to 7.10.2

PR:             115601
Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)

- Update to 7.10.0

PR:             111484
Submitted by:   Erik Greenwald <erikg@arl.army.mil> (maintainer)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Remove 4.X cruft.

Approved by:    maintainer

Use libtool port instead of included version to avoid objformat a.out botch

- Fix build on sparc64. [1]
- Respect ${X11BASE}. [2]

PR:             ports/105535 [1], ports/106245 [2]
Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)

- Update to 7.8.4

PR:             ports/104545
Submitted by:   Erik Greenwald <erik at smluc.org> (maintainer)

- fix build on sparc64

PR:             99971
Submitted by:   ahze
Approved by:    maintainer

- Update to 7.8.2
        This release has several notable enhancements, including the
        addition of a new example geometry model of a toy vehicle. The DXF
        converter received considerable attention with the addition of
        support for most of the formerly unsupported 2D entities. Several
        bugs were identified and fixed in mged, g2asc, g_diff, and asc-nmg.
        Documentation was improved for dbupgrade and dxf-g, and a new g-var
        tool was created to facilitate conversion of models for purposes
        directly related to OpenGL display lists. Finally, the new archer
        modeling tool received support for multi-select and cut-n-paste.

PR:             ports/99819
Submitted by:   maintainer

- Update to 7.8.0
- portlint(1)

PR:             95666
Submitted by:   maintainer

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

[Maintainer Update] cad/brlcad 7.6.4 -> 7.6.6

        Another version upgrade. The amd64 problem has been fixed,
        both as a patch here and in the HEAD of the sf.net repository.

        This has only been tested on 6.0/ia32 and 6.0/amd64, my 7
        box is down and I don't have 4 or 5 anymore. :/

PR:             ports/91037
Submitted by:   Erik Greenwald <erik@smluc.org>

- Update to 7.6.4

PR:             ports/89593
Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Update to 7.6.2, a minor bugfix release

PR:             87579
Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)

- Update to 7.6.0

PR:             ports/85983
Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)

Update to 7.4.2

Submitted by:   Erik Greenwald <erik@smluc.org> (maintainer)
PR:             ports/85757

Upgrade to 7.2.6, and don't mark broken on amd64.

PR:             82420
Submitted by:   Roland Smith <rsmith (at) xs4all.nl>
Approved by:    maintainer

Upgrade to 7.2.4.

A good fat fistful if fixes listed at
<http://sourceforge.net/forum/forum.php?forum_id=466182>

PR:             ports/80919
Submitted by:   maintainer

- Update to 7.2.2
- Move maintainership

PR:             ports/79692
Submitted by:   Erik Greenwald <erik@smluc.org>
Approved by:    Pedro <pfgshield-freebsd@yahoo.com> (old maintainer)

- Fix typo in include file
- install wrapper script in a plist safe way
- Mark IGNORE on platforms != i386 (dumps core)

PR:             ports/78686
Approved by:    portmgr (marcus), arved (mentor)
                Perdo F. Giffuni (maintainer)

BROKEN on !i386 and !amd64: Does not compile

Approved by:    portmgr (self)

Fix a typo in COMMENT.

Reported by:    maintainer.

Add brlcad 7.0.4, CSG modelling system from the US Balistic
Research Laboratory.

PR:             76122
Submitted by:   Pedro F. Giffuni

5 vulnerabilities affecting 16 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities