This is the new, shiny frontend for Cura. Check daid/LegacyCura for the
legacy Cura that everyone knows and loves/hates. We re-worked the
whole GUI code at Ultimaker, because the old code started to become
unmaintainable.
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
devel/py-shapely: Fix PORTNAME and WWW
- Bump PORTREVISION for package change
It is to minimize the patch of 2.0.1 update. Upstream also changed the tarball
from Shapely to shapely.
Approved by: portmgr (blanket)
With hat: python
PyQt: Update to latest versions
- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7
PR: 269751
Exp-run by: antoine
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
ports/cura: Update to 4.13.1
Major update to 4.13.1 not 4.12
I've said it before and I'll say it again. This port should be a
group effort but a cads porting team. I'd be happy to give
up Maintainership as my only interest with cura was to get it into
ports.
PR: ports/255630
Reported by: unrelentingtech <greg@unrelenting.technology>
Tested by: trombik1973@gmail.com
PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these
(Only the first 15 lines of the commit message are shown above )
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
Just to add to the mix here (I can open a new ticket if you prefer):
Missing dependency: py37-qt5-svg (Icons render as black squares without it.)
- db Yes this should have been a separate PR :-) closing PR now
PR: ports/251236
Reported by: eborisch+FreeBSD@gmail.com
the port uses USE_GITHUB=yes, yet the commit did not change GH_TAGNAME.
the package is still 4.7. as a proof, SHA256 in distinfo is identical.
confusingly, the version in "About" says "master", not 4.8 nor 4.7.
this PR should be reopened. (Tomoyuki Sakura)
Apparently I forgot to remove a line causing the wrong cura version
to be claimed as an update to 4.8
I think I have it right this time. Apologies I should have noticed.
I'll take the pointyhat and go sit in the corner.
PR: ports/251236
Submitted by: sko@rostwald.de
Reported by: trombik1973@gmail.com
Update Qt/PySide2 to 5.15.2 / PyQt to 5.15.1 / SIP to 5.4.0
This commit combines several updates.
- Update Qt to 5.12.2
- Update PyQt to 5.15.1
- Since PySide 5.15.1 is broken with Qt 5.15.2, so PySide and Shiboken are also
updated to 5.15.2.
- Update sip to 5.4.0
SIP is a collection of tools to create Python bindings for C and C++ libraries
and used by PyQt and wxPython. There are some changes with sip5 [1]:
- python 3.5+ is required
- sip drops support of old deprecated methods as sipdistutils & cie.
- this version breaks also PyQt5 extension ABI. SIP files will be installed in
${PYTHON_SITELIBDIR}/PyQt${_PYQT_VERSION}/bindings
- some ports will use the new pyqtbuilder package with the pyproject.toml setup.
Instead if the project have a setup.py, you should use sip-build to build it.
- if a port needs sip, it should also needs pysip. BTW, py-qt5-core requires
pysip, so that should be enough for PyQt packages.
(Only the first 15 lines of the commit message are shown above )
From PR:
In Cura version 4.7 a bug regarding slowdowns in circular perimeters was
introduced (or at list gets triggered much more easily than in earlier
versions):
https://github.com/Ultimaker/Cura/issues/8321
This issue makes v4.7.x hardly usable.
Sticking to v4.5 has become quite "tricky" to say the least, due to
the massive python-induced dependency hell and lots of dependencies
being too new and/or incompatible for the 4.5 version.
Version 4.8 has been released on November 10 that fixes this glitch in
the simplification algorithm. The issue is still open, but is considered
to be solved with 4.8 and changed default settings for Maximum resolution
(Only the first 15 lines of the commit message are shown above )
This patch updates Cura and all associated dependencies to 4.7.1.
Also, it adds math/py-numpy-stl - an optional dependency that makes
loading STL files much faster. Without it, Cura was complaining:
2020-09-20 02:19:31,877 - WARNING - [MainThread] STLReader.STLReader.<module>
[32]: Could not find numpy-stl, falling back to slower code.
I'm not sure where the 6.x version in cad/fdm_materials came from, seems
like now that project has its version in sync with the Cura version,
so I chose to increment PORTEPOCH for that. [Greg]
- fdm_materials adds some new materials usable with Cura
- I had to bump PORTEPOCH on a couple of ports
- py-numpy-stl was added on a separate commit
- Bump version checking in Cura on some dependancies
[db]
PR: ports/249468
Submitted by: greg@unrelenting.technology
The serial library returns 'n/a' to the port[2] string that Cura was checking
for starting with 'USB' (which would actually be 'U' for us). I guess
somewhere it is only splitting on 'tty' and not 'cua'. Well, let's just
not filter serial ports for USB for now.
PR: ports/248227
Submitted by: greg@unrelenting.technology
Move comms/py-serial to comms/py-pyserial
- While I'm here, add NO_ARCH
- Bump PORTREVISION of dependent ports for dependency change
(devel/py-pyvisa-py and finance/odoo will be bumped in next commit, py-pyusb
renaming)
PR: 246546
Submitted by: sunpoet (myself)
Approved by: maintainer (timeout, 40 days)
I was confused by the jump back in version numbering but got the proper
commit number after the proper 4.5 tag did an unneeded EPOCH bump
(Thinking I was working on CuraEngine) and then managed to leave the
wrong tag 14.5 instead of 4.5 in the version. (Porter Handbook 5.14)
I'll wear the pointy hat.
Mop up the RUN_DEPENDS I missed as noted by lme@ via email.
===
I made it work on my machine but there were a few missing runtime
dependencies:
- cad/cura-engine
- comms/py-serial
- graphics/qt-graphicaleffects
- x11-toolkits/qt-quickcontrols2
After I installed the packages manually Cura starts successfully. :-)
===
Reported by: lme@FreeBSD.org
This is the new, shiny frontend for Cura. Check daid/LegacyCura for the
legacy Cura that everyone knows and loves/hates. We re-worked the
whole GUI code at Ultimaker, because the old code started to become
unmaintainable.
WWW: https://github.com/Ultimaker/Cura/wiki
