*/tex*: Update version 20230313=>20240312

- devel/tex-kpathsea: Update version 6.3.5=>6.4.0
- devel/tex-libtexlua: Update distinfo
- devel/tex-synctex: Update distinfo
- devel/tex-web2c: Update version 20230313=>20240312
- japanese/tex-ptex: Update distinfo
- print/tex-basic-engines: Update version 20230313=>20240312
- print/tex-dvipdfmx: Update version 20230313=>20240312
- print/tex-dvipsk: Update version 20230313=>20240312
- print/tex-jadetex: Update version 20230313=>20240312
- print/tex-luatex: Update version 20230313=>20240312
- print/tex-ptexenc: Update version 1.4.3=>1.4.6
- print/tex-xdvik: Bump REVISION
- print/tex-xetex: Update verison 0.99993=>20240312
- print/tex-xmltex: Update verison 1.9=>20240312
- print/texlive-base: Update version 20230313=>20240312
- print/texlive-docs: Update version 20230313=>20240312
- print/texlive-texmf-source: Update version 20230313=>20240312
- print/texlive-texmf: Update version 20230313=>20240312
- print/texlive-tlmgr: Update version 20230313=>20240312
- print/xpdfopen: Update version 0.86=>20240312

Sponsored by: Nepustil

devel/tex-kpathsea: Sanitize MANPREFIX

Approved by:    portmgr (blanket)

*/tex*: Update version 20210325=>20230313

- devel/tex-kpathsea: Update version 6.3.3=>6.3.5
- print/texlive-tlmgr: Update version 20210325=>20230313
  * Add LICENSE GPLv2
- devel/tex-libtexlua: Update distinfo from 20230313 dists
- devel/tex-libtexluajit: Update distinfo from 20230313 dists
- print/tex-ptexenc: Update version 1.3.9=>1.4.3
  * Pet portclippy
- devel/tex-web2c: Update version 20210325=>20230313
- devel/tex-synctex: Update distinfo from 20230313 dists
- print/tex-basic-engines: Update version 20210325=>20230313
- print/texlive-base: Update version 20210325=>20230313
- print/texlive-docs: Update version 20210325=>20230313
- print/texlive-full: Update version 20210325=>20230313

Mk/**tex.mk: Convert bsd.tex.mk to USES=tex

- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
  and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
  infrastructure and also in the ports which have been removed from the
  ports as those are redundant.

In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.

Reviewed by:	portmgr
Approved by:	portmgr (blanket)

tex* : Update version 20150521=>20210325

- Update MASTER_SITES_TEX_CTAN from https://tug.org/historic/
- Update texlua to use texlua53 library
- Deprecate CSLaTeX format
- Remove aleph as per Upstream
- Add common variables TEXLIVE_YEAR and TEXLIVE_VERSION to be used in
  all ports related to tex*
- Fix dependency of print/texlive-texmf-source [1]
- devel/tex-kpathsea: Update version 6.2.1=>6.3.3
- devel/tex-libtexlua: Update version 5.2.4=>5.3.6
- devel/tex-libtexluajit: Update version 2.0.3=>2.1.0
- devel/tex-synctex: Update version 1.17.0=>2.0.0
- devel/tex-web2c: Update version 20150521=>20210325
- editors/texworks: Fix build with newer tex version

devel/tex-kpathsea: Update maintainer from freebsd-tex@ to tex@

PR:		257601
Approved by:	tcberner (mentor)

print/texlive-full: Update maintainership of TeX Live universe ports

- Give the maintainership of the TeX-live related ports to the FreeBSD
  TeX group [1].

[1] https://wiki.freebsd.org/tex

Approved by:	hrs

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

- Add LICENSE

Approved by:	portmgr blanket

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

Add preliminary support of tlmgr.

 - TLPDB and tlmgr.log are located in /var/db/tlpkg.

 - "tlmgr conf texmf" modifies /var/db/tlpkg/texmf.cnf.
   libkpathsea looks up it first if it exists and ignore the standard ones
   in PREFIX/share/texmf-dist/web2c/texmf.cnf or
   PREFIX/share/texmf-local/web2c/texmf.cnf.

 - "tlmgr update" can still break consistency of the installed texmf-*
   hierarchy by FreeBSD Ports Collection if it runs by root.

- Separate libsynctex from tex-web2c to devel/tex-synctex.
- Separate basic TeX engines from tex-web2c to print/tex-basic-engines.
- Add CTAN mirrors to MASTER_SITES.
- Drop gmake where not required.
- Remove extra dependencies in print/tex-aleph, print/tex-dvipdfmx,
  print/tex-luatex, print/tex-xetex, and japanese/tex-ptex.

Update TeXLive to TL2015.

- print/texlive-infra was renamed with print/texlive-tlmgr.
  Note that currently tlmgr(1) does not work because of
  lack of TLPDB.  This will be fixed.

- Lua libraries used in LuaTeX are separated into
  devel/tex-libtexlua and devel/texlibtexluajit.
  USE_TEX supports them via keywords "texlua" and "texluajit".

- libsynctex is currently installed by devel/tex-web2c.
  This will be separated into a single port.

- Add graphics/libpotrace and use installed libpotrace
  and libharfbuzz.

- Move kpse* scripts from texlive-base to tex-kpathsea.
- Use install-strip target.

Cleanup plist

Update TeXLive to 2014.

- Note that full support of configuration tools such as tlmgr and texconfig
  is not ready yet.

- Most of dviware now supports libpaper to choose the default papersize.
  Use paperconfig(8) utility or print/papersize-default-* packages.

- Some quite old macros of the age of latex209 have been removed, and
  there are user-visible/invisible incompatibilities.  Please send a report
  to freebsd-tex@FreeBSD.org or file a PR if you have trouble.

- Switch to USES=libtool, drop .la files
- Fix whitespace

Approved by:	portmgr blanket

USES= tar:xz

- Stage support
- Convert to USES

Fix properties on pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 4)

- Fix duplicated pkg-plist entries.
- Split off documentation to print/texlive-docs from print/texlive-texmf.
  The document part was 1.3GB (30k files).  Now the size of texlive-texmf
  package is 557MB (this was 1.5GB before the split).
- do-texhash, do-fmtutil, do-updmap targets now run after post-install.

Add USE_TEX=texlive.

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

Fix dependency.

Spotted by:	miwi

- Separate print/tex-dvipdfmx from print/texlive-base and add libpaper
  support.  dvipdfmx's default paper size can be set by
  ${LOCALBASE}/etc/papersize and/or PAPERSIZE environment variable as
  other programs like print/psutils do.

- Use absolute pathname in {fmtutil,texconfig,updmap}-sys programs because
  manually-installed and/or old TeXLive files can prevent them from
  working. [1]

- Fix pkg-plist in print/texlive-texmf.

- Remove DIST_SUBDIR from Mk/bsd.tex.mk.

Reported by:	bsam, Stephen Montgomery-Smith [1]

TeXLive mega commit.  The following ports have been added:

  * Meta port
   - print/texlive-full: meta port to install all of the TeXLive components

  * Libraries
   - devel/tex-kpathsea: kpathsea library
   - devel/tex-web2c: WEB2C toolchain and TeX engines
   - print/tex-ptexenc: character code conversion library for pTeX

  * Base part of the TeXLive
   - print/texlive-base: binary programs in TeXLive
   - print/texlive-texmf: macro and font data in TeXLive
   - print/texlive-infra: tlmgr dependency (Perl modules)