non port: archivers/py-zstd/Makefile |
SVNWeb
|
Number of commits found: 24 |
Wed, 11 Jan 2023
|
[ 15:58 Dmitry Marakasov (amdmi3) ] 77d6847 (Only the first 10 of 3335 ports in this commit are shown above. )
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt
|
Sun, 18 Sep 2022
|
[ 06:11 Yuri Victorovich (yuri) ] f432a2f
archivers/py-zstd: Update 1.5.2.5 -> 1.5.2.6
Reported by: portscout
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Tue, 3 May 2022
|
[ 23:34 Yuri Victorovich (yuri) ] 85bbd2e
archivers/py-zstd: Update 1.5.2.4 -> 1.5.2.5
Reported by: portscout
|
Sat, 23 Apr 2022
|
[ 03:52 Yuri Victorovich (yuri) ] 2fe49c4
archivers/py-zstd: Update 1.5.1.0 -> 1.5.2.4
Reported by: portscout
|
Mon, 3 Jan 2022
|
[ 19:34 Yuri Victorovich (yuri) ] 64e3160
archivers/py-zstd: Update 1.5.0.4 -> 1.5.1.0
Reported by: portscout
|
Sat, 4 Dec 2021
|
[ 09:21 Yuri Victorovich (yuri) ] 9fab1a7
archivers/py-zstd: Update 1.5.0.2 -> 1.5.0.4
Reported by: portscout
|
Thu, 20 May 2021
|
[ 06:02 Yuri Victorovich (yuri) ] 1b790ff
archivers/py-zstd: Update 1.5.0.0 -> 1.5.0.2
Reported by: portscout
<If someone else reported the issue.>
|
Sun, 16 May 2021
|
[ 16:15 Yuri Victorovich (yuri) ] 4b58bf9
archivers/py-zstd: Update 1.4.9.1 -> 1.5.0.0
Reported by: portscout
|
Sun, 18 Apr 2021
|
[ 05:28 Yuri Victorovich (yuri) ] 860c5fe
archivers/py-zstd: Update 1.4.9.0 -> 1.4.9.1
Reported by: portscout
|
[ 00:16 Yuri Victorovich (yuri) ] f47d74f
archivers/py-zstd: Update 1.4.8.1 -> 1.4.9.0
Reported by: portscout
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Tue, 29 Dec 2020
|
[ 08:10 yuri ]
archivers/py-zstd: Update 1.4.5.1 -> 1.4.8.1
|
Mon, 28 Dec 2020
|
[ 23:02 antoine ] (Only the first 10 of 1942 ports in this commit are shown above. )
Drop python 2.7 support from a few ports
With hat: portmgr
|
Thu, 24 Dec 2020
|
[ 13:46 kai ] (Only the first 10 of 166 ports in this commit are shown above. )
Relax hardcoded paths to fix build with Python 3.8.7
Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme. This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".
The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.
Remedy the issue by adding wildcards to these paths. This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.
[1] https://bugs.python.org/issue42604
PR: 252057
Reported by: John Kennedy
Reviewed by: fluffy, koobs
Approved by: koobs (python)
|
Fri, 19 Jun 2020
|
[ 06:09 yuri ]
archivers/py-zstd: Update 1.4.4.0 -> 1.4.5.1
Reported by: portscout
|
Tue, 16 Jun 2020
|
[ 23:32 yuri ]
archivers/py-zstd: Update 1.4.1.0 -> 1.4.4.0
|
Sat, 31 Aug 2019
|
[ 15:15 yuri ]
archivers/py-zstd: Update 1.4.0.0 -> 1.4.1.0
Reported by: portscout
|
Fri, 3 May 2019
|
[ 03:13 yuri ]
archivers/py-zstd: Update 1.3.5.1 -> 1.4.0.0
Reported by: portscout
|
Sat, 8 Dec 2018
|
[ 18:57 yuri ]
archivers/py-zstd: Update 1.3.4 -> 1.3.5.1
Reported by: repology
|
Wed, 4 Apr 2018
|
[ 19:47 yuri ]
archivers/py-zstd: Update 1.3.3 -> 1.3.4
Reported by: portscout
|
Fri, 16 Mar 2018
|
[ 07:28 yuri ]
archivers/py-zstd: Update to 1.3.3
Reported by: portscout
|
Tue, 9 Jan 2018
|
[ 22:01 yuri ]
New port: archivers/py-zstd: Python binding for Zstandard compression library
This is a simple binding. A more full-featured binding will be
at archivers/py-zstandard.
Submitted by: myself
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D13807
|
Number of commits found: 24 |