notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)

Current status

The server has been repaired, with a new power supply, for $23. I am waiting for lower COVID rates before visiting the datacenter to return it.
non port: archivers/ucl/Makefile
SVNWeb

Number of commits found: 37

Tue, 6 Apr 2021
[ 14:31 mat (Mathieu Arnold) ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148 (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Tue, 12 Jan 2016
[ 16:20 amdmi3 ] Original commit   Revision:405891(Only the first 10 of 791 ports in this commit are shown above. View all ports for this commit)
Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket
Thu, 7 Jan 2016
[ 14:43 amdmi3 ] Original commit   Revision:405447
- Clarify LICENSE
- Switch to options helpers
Fri, 28 Nov 2014
[ 02:12 koobs ] Original commit   Revision:373526
archivers/ucl: Strip files, Add CONFLICTS (libucl)

- Strip installed binaries and libraries
- Add CONFLICTS against libucl
- Add LICENSE_FILE
- pkg-descr: Strip trailing-slash from WWW:
Wed, 11 Jun 2014
[ 18:55 marino ] Original commit   Revision:357526(Only the first 10 of 99 ports in this commit are shown above. View all ports for this commit)
Reset the 99 ports still listed under sylvio@

Sylvio's last commit was 17 months ago, a full 5 months after all of his
ports could have been reset per policy.  Given the push to complete
staging (48 ports are still unstaged, something like 70+ have already
been staged by other committers) and given that PRs are automatically
assigned but never addressed, it's better just to reset all the ports and
PRs so that it's clear to others that these ports are free to maintain.

Approved by:	portmgr (implicit)
Mon, 5 May 2014
[ 21:54 tijl ] Original commit   Revision:353050
Drop libtool patch and .la library.
Wed, 23 Apr 2014
[ 13:25 tijl ] Original commit   Revision:351936(Only the first 10 of 462 ports in this commit are shown above. View all ports for this commit)
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 8 Mar 2014
[ 20:05 sunpoet ] Original commit   Revision:347533
- Add OPTIONS_DEFINE
Wed, 5 Feb 2014
[ 14:02 bapt ] Original commit   Revision:342707
USES libtool
Thu, 26 Dec 2013
[ 16:24 bapt ] Original commit   Revision:337547
Support stage
Fri, 20 Sep 2013
[ 13:11 bapt ] Original commit   Revision:327699(Only the first 10 of 221 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
archivers)
Tue, 18 Dec 2012
[ 07:57 danfe ] Original commit   Revision:309150(Only the first 10 of 32 ports in this commit are shown above. View all ports for this commit)
For a number of ports in archives category, trim the header and drop leading
indefinite article from COMMENT line; also fix few noticed styles bugs while
I am here.
Thu, 19 May 2011
[ 18:25 sylvio ] Original commit (Only the first 10 of 20 ports in this commit are shown above. View all ports for this commit)
- Add license
Sat, 4 Dec 2010
[ 07:34 ade ] Original commit (Only the first 10 of 1730 ports in this commit are shown above. View all ports for this commit)
Sync to new bsd.autotools.mk
Fri, 27 Nov 2009
[ 22:52 sylvio ] Original commit (Only the first 10 of 100 ports in this commit are shown above. View all ports for this commit)
- Update my mail address to FreeBSD

Approved by:    miwi (mentor)
Sat, 19 Sep 2009
[ 17:07 miwi ] Original commit 
- Pass maintainership to submitter

PR:             138587 138586 138584
Submitted by:   Sylvio Cesar <scjamorim@bsd.com.br>
Feature safe:   yes
Sun, 2 Aug 2009
[ 19:36 mezz ] Original commit (Only the first 10 of 1514 ports in this commit are shown above. View all ports for this commit)
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr
Thu, 21 Aug 2008
[ 06:18 rafan ] Original commit (Only the first 10 of 1030 ports in this commit are shown above. View all ports for this commit)
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 1 Feb 2007
[ 02:42 kris ] Original commit (Only the first 10 of 348 ports in this commit are shown above. View all ports for this commit)
Use libtool port instead of included version to avoid objformat a.out botch
Mon, 14 Aug 2006
[ 09:56 clsung ] Original commit 
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
Thu, 23 Feb 2006
[ 10:40 ade ] Original commit (Only the first 10 of 2514 ports in this commit are shown above. View all ports for this commit)
Conversion to a single libtool environment.

Approved by:    portmgr (kris)
Tue, 15 Nov 2005
[ 06:52 ade ] Original commit (Only the first 10 of 1438 ports in this commit are shown above. View all ports for this commit)
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
Tue, 12 Apr 2005
[ 03:26 obrien ] Original commit (Only the first 10 of 773 ports in this commit are shown above. View all ports for this commit)
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
Mon, 11 Apr 2005
[ 08:04 obrien ] Original commit (Only the first 10 of 776 ports in this commit are shown above. View all ports for this commit)
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
Tue, 12 Oct 2004
[ 07:54 sergei ] Original commit 
- Update to 1.03

PR:             ports/72471
Submitted by:   Dima Panov <redfox@Fluffy.Khv.RU>

While I'm here:
- Install some additional documentation
- Shorten COMMENT
- Various cleanup
Fri, 9 Jul 2004
[ 17:43 marcus ] Original commit (Only the first 10 of 489 ports in this commit are shown above. View all ports for this commit)
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet
Sat, 17 Apr 2004
[ 19:12 krion ] Original commit 
- Fix configure warning

PR:             65668 65669 65670 65671 65672 65673
Submitted by:   Roman Neuhauser <neuhauser at chello dot cz>
Sun, 14 Mar 2004
[ 06:17 ade ] Original commit (Only the first 10 of 945 ports in this commit are shown above. View all ports for this commit)
Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Fri, 27 Feb 2004
[ 12:10 clement ] Original commit 
- Pacify portlint and use misc macros
- remove pkg-plist (fastjar and stuffit)
Sun, 28 Dec 2003
[ 15:18 pav ] Original commit 
- Update to 1.02

PR:             ports/60653
Submitted by:   Vincent Tantardini <vinc@FreeBSD-fr.org>
Tue, 29 Jul 2003
[ 09:12 sobomax ] Original commit (Only the first 10 of 128 ports in this commit are shown above. View all ports for this commit)
Let be hohest: I really don't have a time now to properly maintain all
these great pieces of software, so that let others with more free time
to take over them.
Fri, 7 Mar 2003
[ 05:55 ade ] Original commit (Only the first 10 of 42 ports in this commit are shown above. View all ports for this commit)
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.
Sat, 28 Dec 2002
[ 03:49 edwin ] Original commit 
Removed MASTER_SITE_SUNSITE from the master_sites, it doesn't appear
it has ever been there.
Noticed by: portsurvey.
Fri, 30 Aug 2002
[ 12:04 sobomax ] Original commit 
Update to 1.01.

PR:             39197
Prompted by:    Szymon Roczniak <simon@dischaos.com>
Mon, 14 Jan 2002
[ 10:14 sobomax ] Original commit 
Update MASTER_SITES, WWW and autor's e-mail.    
Wed, 14 Feb 2001
[ 05:43 lioux ] Original commit (Only the first 10 of 34 ports in this commit are shown above. View all ports for this commit)
typo clean up police: \s -> \t    
Mon, 29 Jan 2001
[ 19:39 sobomax ] Original commit 
Add ucl 0.92, a data compression library with low memory usage during  
decompression and competitive with zlib compression ratio.    

Number of commits found: 37