Number of commits found: 63

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

USES=compiler:c++11-lang is required to build this port on GCC-based
architectures.

PR:		233539
Submitted by:	Piotr Kubaj

Return avilla@'s ports to the pool after his commit bit got taken in for
safekeeping.

Add PY_FLAVOR to Python module dependencies.

Sponsored by:	Absolight

Switch from swig 2.0 to swig 3.0

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

(Only the first 15 lines of the commit message are shown above )

Assume "pkg-config libusb*" works after 9.x EOL

FreeBSD appears to use different pkg-config name for 0.1.x API but it
doesn't matter much as 0.1, 1.0 and 2.0 share CFLAGS/LIBS.

USES=mono: simplify EXTRACT_ONLY, fix nuget-extract [1]
 - Instead of excluding the specific packages added to DISTFILES (but only for
   FreeBSD 9+), exclude all files with a '.nupkg' extension.
 - Move the nuget-extract command to be before post-extract, to allow the port's
   post-extract command to move packages around

audio/libgpod-sharp: add port for mono bindings for libgpod
 - audio/libgpod: [2]
   - USE_GNOME: add missing dependency
   - Remove mono files from pkg-plist (now in audio/libgpod-sharp)
   - Allow relevant variables to be overridden
   - Fix MONO options
   - Patch source to allow building with modern mono
   - Avoid post-install target for slave ports.

(Only the first 15 lines of the commit message are shown above )

Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.

Change summary:

- Always do verbose builds for cmake, ninja and GNU configure (the
  latter includes check if --disable-silent-rules is actually supported
  by the configure script; there are isolated cases when it's not true)

(Only the first 15 lines of the commit message are shown above )

Remove USE_SQLITE from bsd.databases.mk, replaced by USES=sqlite.

While there replace USE_SQLITE=x by USES=sqlite:x.

PR:		208971
Submitted by:	mat
Exp-run by:	antoine
With hat:	portmgr
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D5951

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

- Remove no longer needed `post-patch' target that now prevented building
  of the auxiliary tools and install `ipod-time-sync'
- Convert to USES=localbase; add --disable-silent-rules to CONFIGURE_ARGS
  to make debugging easier; use option helpers

Approved by:	avilla (maintainer; timeout)

Part 1 of adding USE_GNOME=intltool to ports that require it.

The reason for this is that in the GNOME 3.16 update, USE_GNOME gtk20 and
gtk30 don't pull intltool in anymore.

PR:		201980
Exp-run by:	antoine@

- Chase libplist shlib version bump.
- Disable unsupported Mono bindings.

Remove OSVERSION checks that do not make sense any more.

For example (${OSVERSION} >= 900000 && ${OSVERSION} < 900021) is always true,
as is (${OSVERSION} > 900002 || ${OSVERSION} < 900000 && ${OSVERSION} > 800107).

Regarding patches, when an EXTRA_PATCHES is no longer needed, I remove it, when
it is always needed, I renamed it, in one case, I merged two patches.

Differential Revision:	https://reviews.freebsd.org/D2209

- Convert <OPTION>_USE= PYTHON... to <OPTION>_USES= python...

With hat:	python@

- Chase libplist shlib bump.

- Switch to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

Bump PORTREVISION on all ports with USE_SQLITE=yes or USE_SQLITE=3 that
have not been bumped yet after the latest libsqlite3.so library version
change.

Approved by:	portmgr (implicit)

- USE_(BZIP2|XZ) -> USES= tar:(bzip2|xz)

- Update to 0.8.3.
- STAGEify.
- Use LIB_DEPENDS new format.
- Use OPTIONS helpers.

Version 0.8.3 brings the following improvements:
 * Add support for libimobiledevice 1.1.5 (there was an API/ABI break)
 * Remove use of some deprecated glib functions
 * Fix various issues found using clang/cppcheck
 * Improve robustness of the iphone callout

Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)

Add an explicit dependency on pkgconf

Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix

- Chase libimobiledevice soversion bump.
- Remove SWIG from RUN_DEPENDS.
- Sort plist.
- Cleanup.

Chase security/libgcrypt update

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

Convert to OptionsNG
Trim header

Approved by:	avilla (maintainer)

- Update libGPOD to 0.8.2 release
    No more crash with mono bindings on i386
    Better iOS 4.3 support
    Still no iPhone/iPod 4/4S support
    Bugfixes

Approved by:    avilla (maintainer, via IM)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Adjust COMMENT if iPhone support is enabled, and update port description.

Approved by:    maintainer (implicit)

Convert custom *_DEPENDS lines of devel/py-gobject to USE_GNOME=pygobject or
pygtk2 (which depends already on py-gobject).

Make support for Apple iPhone/iPod Touch (and thus `comms/libimobiledevice'
dependency) optional (but enabled by default).  Users of older Apple gadgets
can unset it to make their systems slightly less polluted e.g. with GnuTLS,
(default SSL implementation throughout the Ports Collection is OpenSSL).

Approved by:    maintainer (implicit)

- Update to version 0.8.0
- Add LICENSE (LGPL20)
- Install some extra documentation files
- Transfer maintainership to submitter.  Alberto did a good job on porting
  libgpod dependencies, owns more recent Apple gadgets than me, and kindly
  agreed to look after this port

PR:             ports/155161
Submitted by:   avilla

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- Check for correct library name of `sysutils/sg3_utils' port
- Couple of non-functional cleanups while here

PR:     ports/142893 (name change forgotten by miwi@)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Chase sysutils/sg3_utils slib bump

PR:             142893
Submitted by:   Mykola Dzham <i@levsha.me>
Approved by:    maintainer timeout

- update to jpeg-8

- Allow to build with Python bindings [1]
- Optionally, build SysInfo detection utility, which is required in order
  to support iPod classic and nano 3G [2]
- Some minor Makefile nits

Since both knobs are disabled by default, do not bump PORTREVISION

PR:             ports/124707 [1], ports/126656 [2]
Submitted by:   edwin [1], ehaupt [2]

- Switch SourceForge ports to the new File Release System: categories starting
with A

- Update to 0.7.2 (it required for upcoming amarok 2.1.1 update)

PR:             136989
Submitted by:   "Dima Panov" <fluffy@fluffy.khv.ru>
Approved by:    maintianer timeout

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to version 0.6.0, which has support for new iPod Classics and Nano
  Videos, and also preliminary support for the iPhone and the iPod Touch
- Stop messing with things at extract stage, do it during patching instead
- Fix configure warnings (weak test(1) syntax)
- Clarify and expand Makefile comments

- Remove the DESTDIR modifications from individual ports as we have a new,
  fully chrooted DESTDIR, which does not need such any more.

Sponsored by:   Google Summer of Code 2007
Approved by:    portmgr (pav)

Update libgpod and gtkpod to most recent versions, 0.5.2 and 0.99.10,
respectively.

Based on PR:    ports/114563, ports/114564
Submitted by:   Herbert J. Skuhra

- Remove support for old GCC versions (pre-3.x)
- Add a comment on what I do with sed(1) here

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

[patch] cleanup non-supported FreeBSD versions

PR:             ports/111669
Submitted by:   Edwin Groothuis <edwin@mavetju.org>
Approved by:    maintainer timeout

Update to version 0.4.2.

PR:             ports/109300
Submitted by:   Herbert J. Skuhra

Update libgpod and gtkpod to most recent verions, 0.4.0 and 0.99.8,
respectively.  Also rename a knob, commit to UPDATING will follow.

Fix the build with older GCC.

Reported by:    krismail

Bump PORTREVISION after pkg-plist fix.

Update to most recent versions.

Prodded by:     several

While previous commit should have fixed port breakage, depend on gtk20
instead of glib20 since libgpod makes usage of gdk_pixbuf.  While here,
kill nearby USE_REINPLACE, which is no-op now.

Approved by:    portmgr (marcus)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

BROKEN: Configure fails

- Hopefully fix the build on cluster [1]
- Previous commit was useless, but don't revert it :-(

Reported by:    krismail [1]

Reindent group of lines in preparation for next commit.

Add libgpod 0.3.0, a library for direct access of iPod's contents.

PR:             ports/91531
Submitted by:   Devon Ryan <dpryan(at)dpryan.com>

Number of commits found: 63

8 vulnerabilities affecting 24 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2019-10-15 15:43:31