17:28 antoine 

Deprecate a few ports

 

08:22 antoine 

Mark BROKEN: unfetchable

 

12:47 bapt 

wxGTK3.0: switch to gtk3 and webkit2

Discussed with:	portmgr

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

11:10 antoine 

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

08:20 riggs 

Chase ffmpeg 3.3 update (ABI changes)

PR:		218658
Submitted by:	riggs

 

13:29 mat 

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

 

21:27 bapt 

Remove dead CENKES mirror

 

14:13 jhale 

- Convert to USES=python
- Depend on python packages instead of installed file
- Add LICENSE

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

18:53 wg 

audio/mbox: use WX 3.0+

 

13:10 bapt 

Switch to wx 2.8

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

21:00 rene 

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

22:31 mva 

- Enable stage support
- Convert to PYDISTUTILS_AUTOPLIST
- Limit to the supported python versions

 

14:36 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)

 

05:26 dinoex 

- update png to 1.5.10

22:27 netchild 

Update lame to 3.99.3.
Bump portrevision of all ports which depend upon it.

08:55 netchild 

- update audio/lame to 3.98.4
- use ?= for the portrevision of a master port to make it possible to
  change it in a slave port which depends upon lame
- bump portrevisions of ports which depend upon lame
  - done via a semi-automated way (manual review and fixup)
  - I tried to take care to not bump ports which only depend optionaly on
    lame (with a default of no dependency)

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

13:07 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

17:54 sat 

- Fix plist by using PYDISTUTILS_PKGNAME
- Provide more mirrors
- Bump portrevision

Reported by:    pointyhat via portsmon

01:07 kris 

BROKEN: Incorrect pkg-plist

03:58 rafan 

- Update to 0.7.2
- Switch to wx 2.6

PR:             ports/114409
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

07:39 pav 

- Use features of bsd.wx.mk, especially USE_WX

PR:             ports/101613
Submitted by:   alepulver

12:54 sem 

- Update graphics/libglut to 6.4.1.
- Shared lib version and PORTREVISION bumb for all affected ports.

While I'm here:
- Remove USE_MESA knob where it was (35 ports).
  It marked as depricated for 2 years.

PR:             ports/90247
Submitted by:   Ermal Lu?i <eri--@albabsd.org>

05:22 marcus 

Bump PORTREVISION to chase the glib20 shared library update.

04:40 linimon 

Reset bouncing maintainer addresses.

Hat:            portmgr
Source:         Edwin's updated distfile tracker

16:39 fjoe 

Finish repo copy of wxgtk 2.4.2 ports to wxgtk24*

10:54 marcus 

Bump PORTREVISION to chase the glib20 shared lib version change.

23:52 ahze 

- Remove audio/mBox and merge changes in to audio/mbox since
 these ports are duplicate with same maintainer as audio/mBox

19:10 ahze 

Update to 0.5.2, bug-fix release

Approved by:    adamw (mentor)

22:00 ahze 

Add mbox

mBox is program intended to help you with organizing your music files.

The most important features are:

- ability to reencode mp3/ogg/wma to mp3/ogg
- contains utility 'convertor' which converts whole directories to desired
  format. Bitrate, etc. is automatically adjusted depending on settings
  and source audio.
- reading/writing tags in MP3 ID3v1 and ID3v2, Ogg Vorbis
- reading WMA tags
- FreeDB, treates encoded files as if it was CD, so you can simply
 select your files and - if found in database - write tags to them.
- auto tagging - reads tag information from filename
- batch tags editing
- batch files renaming (can use tags)
- directory renaming (can use tags)

Approved by:    adamw (mentor)