PyAudio provides Python bindings for PortAudio, the cross-platform
audio I/O library. With PyAudio, you can easily use Python to play
and record audio on a variety of platforms.
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py311-pyaudio listed in the above command, you can pick from the names under the Packages section.
===> The following configuration options are available for py311-pyaudio-0.2.14_1:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal
Any missed ports, feel free to bump.
Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com>
(Only the first 15 lines of the commit message are shown above )
Relax hardcoded paths to fix build with Python 3.8.7
Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme. This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".
The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.
Remedy the issue by adding wildcards to these paths. This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.
[1] https://bugs.python.org/issue42604
PR: 252057
Reported by: John Kennedy
Reviewed by: fluffy, koobs
Approved by: koobs (python)
Update Sphinx
- Repocopy textproc/py-sphinx to textproc/py-sphinx18
Update it to 1.8.5 (latest version from 1.8.X).
This version supports Python 2 and 3.
Add test target.
- textproc/py-sphinx: Update to 3.0.2
Python 3 only (3.5+).
Add test target.
- Mk/Uses/python.mk: Add PY_SPHINX
(Only the first 15 lines of the commit message are shown above )
Fix stage-qa errors when building a non-default Python flavor when DOCS option
is enabled. (e.g. py27 default, try to build py36)
===> Checking for items in STAGEDIR missing from pkg-plist
Error: Orphaned: %%PYTHON_SITELIBDIR%%/pyaudio.pyc
===> Checking for items in pkg-plist which are not in STAGEDIR
===> Error: Plist issues found.
textproc/py-sphinx is only needed for DOCS here and should be the same flavor as
the port being built to avoid bytecode leftovers.
Do DOCS build in the build stage and simplify DOCS installation
Approved by: portmgr (blanket)
audio/py-pyaudio: 0.2.8 -> 0.2.9
- Fix overflow error handling logic for pa_read_stream.
Stream.read takes an additional parameter that specifies whether
an exception is raised on audio buffer overflow, for parity with
Stream.write. Includes relevant bug fixes in the C module logic.
Thanks to Tony Jacobson for submitting a patch!
- Fix IOError arguments.
IOError exceptions previously had values in the strerror and errno fields
swapped, which is now corrected.
Thanks to Sami Liedes for the report!
- Miscellaneous updates.
Python library surfaces issues with importing low-level C module.
Code formatting update.
Updates to examples for Python 3 compatibility.
PR: 208517
Submitted by: jaap@NLnetLabs.nl (maintainer)
Update portaudio to v19/Remove portaudio2 [1]
Chase portaudio change
Add patches from debian for games/cultivation
Add patches from upsteam for audio/rezound
Mark py-fastaudio as broken
Approved by: maintainer
- Update to version 0.2.8, add LICENSE [1]
- Fix build on DragonFly and when LOCALBASE != PREFIX [2]
- Make sure to link with audio/portaudio2 [2]
PR: 196054
Submitted by: maintainer [1], Jan Beich [2]
PyAudio provides Python bindings for PortAudio, the cross-platform
audio I/O library. With PyAudio, you can easily use Python to play
and record audio on a variety of platforms.
WWW: http://people.csail.mit.edu/hubert/pyaudio/
PR: ports/173708
Submitted by: Jaap Akkerhuis <jaap@NLnetLabs.nl>
