| non port: audio/py-pyliblo/Makefile |
|
SVNWeb
|
Number of commits found: 38 |
|
Wed, 5 Apr 2023
|
[ 17:30 Po-Chuan Hsieh (sunpoet)  ]    91bb5e9
audio/py-pyliblo: Update WWW and clean up pkg-descr
|
|
Wed, 11 Jan 2023
|
[ 15:58 Dmitry Marakasov (amdmi3) ] 77d6847 (Only the first 10 of 3335 ports in this commit are shown above.  )
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:20 Tobias C. Berner (tcberner) ] 213b0b7 (Only the first 10 of 561 ports in this commit are shown above. )
audio: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <dmagda+libsamplerate@ee.ryerson.ca>
* <trasz@FreeBSD.org>
* Adam Weinberger
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aleksander Fafula <alex@bsdguru.org>
* Alex Allan <alex@kamaz.org.uk>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kojevnikov <alexander@kojevnikov.com>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexander Vereeken <Alexander88207@protonmail.com> (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 5 Nov 2021
|
[ 19:14 Po-Chuan Hsieh (sunpoet) ] aacf93a
audio/py-pyliblo: Cosmetic change
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 28 Dec 2020
|
[ 23:02 antoine ]   (Only the first 10 of 1942 ports in this commit are shown above. )
Drop python 2.7 support from a few ports
With hat: portmgr
|
|
Thu, 24 Dec 2020
|
[ 13:46 kai ] (Only the first 10 of 166 ports in this commit are shown above. )
Relax hardcoded paths to fix build with Python 3.8.7
Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme. This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".
The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.
Remedy the issue by adding wildcards to these paths. This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.
[1] https://bugs.python.org/issue42604
PR: 252057
Reported by: John Kennedy
Reviewed by: fluffy, koobs
Approved by: koobs (python)
|
|
Sat, 22 Feb 2020
|
[ 15:56 sunpoet ]
Use USE_PYTHON=autoplist
- Change MASTER_SITES to CHEESESHOP
- Simplify Makefile and setup.py patch after r523104 and r523220
- Take maintainership
|
|
Thu, 16 Jan 2020
|
[ 09:34 bapt ] (Only the first 10 of 53 ports in this commit are shown above. )
First pass at moving manpages to share/man for category a*
|
|
Sat, 30 Nov 2019
|
[ 20:21 yuri ]
audio/py-pyliblo: Add USE_PYTHON=concurrent
because it installs executables into bin/
|
|
Sun, 6 Jan 2019
|
[ 12:39 tobik ]
Do not set USES twice
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 25 Nov 2017
|
[ 20:29 yuri ]
audio/py-pyliblo: Update: Removed the unnecessary dependency on pyrex; Made it
python3-compatible; Added USES=localbase:ldflags
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D13189
|
|
Fri, 1 Apr 2016
|
[ 13:29 mat ] (Only the first 10 of 1009 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 7 May 2015
|
[ 02:06 wen ]
- Update to 0.10.0
|
|
Tue, 24 Feb 2015
|
[ 13:57 amdmi3 ]
- Add LICENSE_FILE
- Strip library
|
|
Mon, 8 Dec 2014
|
[ 16:48 tijl ] (Only the first 10 of 920 ports in this commit are shown above. )
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used. (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 17 Sep 2014
|
[ 11:09 robak ]
audio/py-pyliblo: update 0.9.1 -> 0.9.2
- Update the setup.py patch
- Update the port with USES=python
Approved by: mentors (implicit)
|
|
Sun, 11 May 2014
|
[ 15:46 wen ]
- Add LICENSE
- Pet portlint
- Reset maintainer to ports@
|
|
Fri, 4 Apr 2014
|
[ 22:46 bapt ]
Support stage
|
|
Fri, 21 Feb 2014
|
[ 13:35 ehaupt ] (Only the first 10 of 28 ports in this commit are shown above. )
Remove trailing whitespaces from category audio
|
|
Mon, 10 Feb 2014
|
[ 13:54 ehaupt ] (Only the first 10 of 581 ports in this commit are shown above. )
According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.
This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.
Approved by: portmgr (bapt)
|
|
Fri, 3 Jan 2014
|
[ 15:26 adamw ] (Only the first 10 of 48 ports in this commit are shown above. )
Convert to PORT_OPTIONS:MDOCS.
Holdout shame list: ruby, perl, python
|
|
Wed, 11 Dec 2013
|
[ 14:35 bapt ] (Only the first 10 of 268 ports in this commit are shown above. )
In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in audio
With hat: portmgr
|
|
Fri, 20 Sep 2013
|
[ 14:36 bapt ] (Only the first 10 of 879 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
audio)
|
|
Sat, 13 Jul 2013
|
[ 17:23 deischen ] (Only the first 10 of 14 ports in this commit are shown above. )
Bump PORTREVISION after upgrade to audio/liblo.
After discussion with: pawel and MAINTAINER.
|
|
Sat, 1 Jun 2013
|
[ 14:22 wen ]
- Trim Makefile headers
|
|
Sun, 6 Nov 2011
|
[ 16:36 miwi ] (Only the first 10 of 16 ports in this commit are shown above. )
- Get rid FreeBSD 6.X support
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Sat, 12 Feb 2011
|
[ 06:51 wen ]
- Update to 0.9.1
|
|
Thu, 28 Oct 2010
|
[ 10:59 wen ]
- Fix build on FreeBSD-6
|
|
Mon, 25 Oct 2010
|
[ 08:02 wen ]
- Update to 0.9.0
|
|
Fri, 4 Dec 2009
|
[ 11:23 wen ]
- Update to 0.8.1
|
|
Sun, 4 Oct 2009
|
[ 23:40 wen ]
- Update to 0.8.0
- Update my mail address to FreeBSD
Approved by: jadawin(co-mentor)
|
|
Sun, 31 May 2009
|
[ 16:04 itetcu ]
- fix build with custom LOCALBASE/PREFIX
- install man pages under PREFIX, not LOCALBASE
- bump PORTREVISION
Submitted by: maintainer
Reported by: QATty
|
|
Tue, 31 Mar 2009
|
[ 05:25 trasz ] (Only the first 10 of 15 ports in this commit are shown above. )
Update audio/liblo to 0.26.
|
|
Mon, 9 Feb 2009
|
[ 20:10 miwi ]
pyliblo is a Python wrapper for the liblo OSC library. It
supports almost the complete functionality of liblo, allowing
you to send and receive OSC messages using a nice and simple
Python API.
Also included are the command line utilities send_osc and
dump_osc.
WWW: http://das.nasophon.de/pyliblo/
PR: ports/130975
Submitted by: Wen Heping <wenheping at gmail.com>
|
Number of commits found: 38 |
As an Amazon Associate I earn from qualifying purchases.