| Port details |
- fdm_materials FDM Material database for 3D printers
- 4.7.1,1 cad
 =0      Version of this port present on the latest quarterly branch. - Maintainer: db@FreeBSD.org
- Port Added: 2020-03-25 18:12:33
- Last Update: 2022-09-07 21:58:51
- Commit Hash: fb16dfe
- License: AGPLv3
- Description:
- FDM material database
  ¦  ¦  ¦  ¦  - pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- fdm_materials>0:cad/fdm_materials
- To install the port:
- cd /usr/ports/cad/fdm_materials/ && make install clean
- To add the package, run one of these commands:
- pkg install cad/fdm_materials
- pkg install fdm_materials
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: fdm_materials
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1600556694
SHA256 (Ultimaker/Ultimaker-fdm_materials-4.7.1-c7331d5ea_GH0.tar.gz) = 5ac6b76a25c7aa8df9ebb9e6b16da7d1221b27c88346925144268282e73265f4
SIZE (Ultimaker/Ultimaker-fdm_materials-4.7.1-c7331d5ea_GH0.tar.gz) = 41141
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- cmake : devel/cmake-core
- ninja : devel/ninja
- This port is required by:
- for Run
-
- cad/cura
Configuration Options:- No options to configure
- Options name:
- cad_fdm_materials
- USES:
- cmake
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
07 Sep 2022 21:58:51
 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
4.7.1,1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
4.7.1,1
07 Sep 2022 10:26:41
|
Tobias C. Berner (tcberner) |
cleanup: remove trailing whitepaces |
4.7.1,1
07 Apr 2021 08:09:01
|
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
4.7.1,1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
4.7.1,1
26 Sep 2020 19:53:10
 |
db |
This patch updates Cura and all associated dependencies to 4.7.1.
Also, it adds math/py-numpy-stl - an optional dependency that makes
loading STL files much faster. Without it, Cura was complaining:
2020-09-20 02:19:31,877 - WARNING - [MainThread] STLReader.STLReader.<module>
[32]: Could not find numpy-stl, falling back to slower code.
I'm not sure where the 6.x version in cad/fdm_materials came from, seems
like now that project has its version in sync with the Cura version,
so I chose to increment PORTEPOCH for that. [Greg]
- fdm_materials adds some new materials usable with Cura
- I had to bump PORTEPOCH on a couple of ports
- py-numpy-stl was added on a separate commit
- Bump version checking in Cura on some dependancies
[db]
PR: ports/249468
Submitted by: greg@unrelenting.technology |
6.3.2
07 Apr 2020 16:03:04
|
tobik |
Clean up some duplicated variables
Reported by: portscan |
6.3.2
25 Mar 2020 18:10:50
|
db |
In preparation for Cura updates add the FDM material database |
As an Amazon Associate I earn from qualifying purchases.