17:16 Muhammad Moinur Rahman (bofh) 

cad/py-cq-editor: Remove expired port

2023-06-21 cad/py-cq-editor: Depends on expiring cad/py-cadquery

    7e176bb

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

15:17 Christian Weisgerber (naddy) 

audio/opus: bump consumers after update to 1.4

    feb1fa3

09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

15:47 Rene Ladan (rene) 

all: expire ports depending on cad/py-ocd on 2023-06-21

    9e2115d

11:15 Loïc Bartoletti (lbartoletti) 

PyQt: Update to latest versions

- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7

PR:		269751
Exp-run by:	antoine

    6d3a647

21:32 Yuri Victorovich (yuri) 

cad/py-cq-editor: Update Spyder dependency

Reported by:	Christian Weisgerber <naddy@freebsd.org>

    d1367e1

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

17:39 Loïc Bartoletti (lbartoletti) 

devel/py-qt5, devel/py-sip: Update versions

- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)

PR:		261685
Exp-run by:	antoine

    2d8f8573

06:12 Loïc Bartoletti (lbartoletti) 

PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.

SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.

PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.

This allows us to be in adequacy with the packages that the author of these
libraries proposes, namely:

PyQt - devel/py-qt5-pyqt
PyQt-Charts - x11-toolkits/py-qt5-chart
PyQt-NetworkAuth – net/py-qt5-networkauth
PyQt-WebEngine – www/py-qt5-webengine
SIP – devel/py-sip
py-sip - devel/py-qt5-sip
PyQt-builder - devel/py-qtbuilder
Qscintilla - devel/py-qt5-qscintilla2

Reviewed by:	diizzy, kde
Tested by:	kai, rhurlin, arrowd, madpilot
Approved by:	makc, tcberner, kde
Differential Revision:	https://reviews.freebsd.org/D33237
Exp-run by:	antoine

    4f0a5e1

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

09:29 lbartoletti 

PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1

PR:		254218
Exp-run by:	antoine

 

06:49 lbartoletti 

PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0

* PyQt5: update to 5.15.3

This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.

 - Added the missing QImage.setAlphaChannel().
 - Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
 - Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.

* QScintilla2: update to 2.12.0

This adds support for Qt6 and removes support for Qt4.

 - Change the new distname (again)i due to a conflict
 - Use the new sip-build system

* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo

PR:		253865
Exp-run by:	antoine

 

17:56 lbartoletti 

Update PyQt5 to 5.15.2, sip to 5.5.0, py-qtbuilder to 1.6.0 and py-qt5-sip to
12.8.1

PR:		251764
Exp-run by: antoine

 

08:09 lbartoletti 

cad/py-cq-editor: Add devel/py-spyder dependency

cq-editor requires CodeEditor widget from py-spyder.

PR:		250586
Reported by:	rsmith@xs4all.nl
Approved by:	Neal Nelson (maintainer)
MFH:		2020Q4 (blanket, runtime fixes)

 

17:49 antoine 

Fix DEPENDS

 

15:50 lbartoletti 

Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5

- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts

[1] RiverBankComputing doesn't offer links to download latest version of some
ports

PR:		247369
Reviewed by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D25749
Exp-run by:	antoine

 

12:54 swills 

cad/py-cq-editor: create port

CQ-editor is a CadQuery GUI editor based on PyQT.

Graphical debugger for CadQuery scripts
- Step through script and watch how your model changes

CadQuery object stack inspector
- Visual inspection of current workplane and selected items
- Insight into evolution of the model

Export to various formats
- STL
- STEP

WWW: https://github.com/CadQuery/CQ-editor/

PR:		248212
Submitted by:	Neal Nelson <ports@nicandneal.net>