FreshPorts -- cad/salome-med: MED module of Salome platform

Port details

salome-med MED module of Salome platform

5.1.4_7 cad =0 5.1.4_7Version of this port present on the latest quarterly branch. NOTE: Slave port - quarterly revision is most likely wrong.

BROKEN: Fails to fetch

DEPRECATED: depends on expired cad/salome-kernel

This port expired on: 2014-01-22

IGNORE: is marked as broken: Fails to fetch

Maintainer: devel@stasyan.com

Port Added: 2010-02-12 22:16:42

Last Update: 2014-01-24 09:32:00

SVN Revision: 340885

Also Listed In: science

License: not specified in port

Description:

SALOME is a free software that provides a generic platform for Pre and Post-Processing for numerical simulation. +Supports interoperability between CAD modeling and computation software (CAD-CAE link) +Makes easier the integration of new components on heterogeneous systems for numerical computation +Sets the priority to multi-physics coupling between computation software +Provides a generic user interface, user-friendly and efficient, which helps to reduce the costs and delays of carrying out the studies +Reduces training time to the specific time for learning the software solution which has been based on this platform +All functionalities are accessible through the programmatic integrated Python console This package contains meta-port. WWW: http://www.salome-platform.org

SVNWeb : ~~git~~ : Homepage

pkg-plist: as obtained via: make generate-plist

There is no configure plist information for this port.

Dependency lines:

salome-med>0:cad/salome-med

No installation instructions: this port has been deleted.
The package name of this deleted port was: salome-med
PKGNAME: salome-med
Flavors: there is no flavor information for this port.
distinfo:: There is no distinfo for this port.

No package information for this port in our database

Master port: cad/salome

Dependencies

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:

kernel : cad/salome-kernel
gui : cad/salome-gui
swig : devel/swig13
libboost_python.so : devel/boost-python-libs
kmetis : math/metis-edf
gmap : cad/scotch
python2.7 : lang/python27
gmake : devel/gmake
gcc44 : lang/gcc44
as : devel/binutils
libQtGui.so : x11-toolkits/qt4-gui
linguist-qt4 : devel/qt4-linguist
moc-qt4 : devel/qt4-moc
libQtOpenGL.so : graphics/qt4-opengl
qmake-qt4 : devel/qmake4
rcc : devel/qt4-rcc
libQtSvg.so : graphics/qt4-svg
uic-qt4 : devel/qt4-uic
libQtXml.so : textproc/qt4-xml
automake-1.14 : devel/automake
autoconf-2.69 : devel/autoconf
libtool>=2.4 : devel/libtool

Runtime dependencies:

kernel : cad/salome-kernel
gui : cad/salome-gui
libboost_python.so : devel/boost-python-libs
omniORBpy.h : devel/py-omniorb
notifd : devel/omniNotify
kmetis : math/metis-edf
gmap : cad/scotch
python2.7 : lang/python27
gcc44 : lang/gcc44
libQtGui.so : x11-toolkits/qt4-gui
linguist-qt4 : devel/qt4-linguist
libQtOpenGL.so : graphics/qt4-opengl
libQtSvg.so : graphics/qt4-svg
libQtXml.so : textproc/qt4-xml

Library dependencies:

libhdf5.so.7 : science/hdf5-18
libTKernel.so : cad/opencascade
libxml2.so : textproc/libxml2
libboost_thread.so : devel/boost-all
libvtkCommon.so : math/vtk5
libomniORB4.so : devel/omniORB
libmed.so : french/med
tk86 : x11-toolkits/tk86

NOTE: dependencies for deleted ports are notoriously suspect

This port is required by:

for Build

Deleted ports which required this port:

Expand this list of 4 deleted ports

for Run

Deleted ports which required this port:

Expand this list of 5 deleted ports

* - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

Configuration Options:

===> The following configuration options are available for salome-med-5.1.4_7: GEOM=on: GEOM module LIGHT=on: LIGHT module MED=on: MED module MULTIPR=on: Multipr module NETGENPLUGIN=on: Netgen-meser plugin RANDOMIZER=on: Randomizer module SIERPINSKY=on: Sierpinsky module SMESH=on: SMESH module (require MED & GEOM) VISU=on: VISU module (require MED) YACS=on: Yacs module ===> Use 'make config' to modify these settings

Options name:

N/A

Master Sites:

Expand this list (2 items)

Collapse this list.

Port Moves

port deleted on 2014-01-24
REASON: Has expired: depends on expired cad/salome-kernel

Number of commits found: 14

Date	By	Description
Commit History - (may be incomplete: see SVNWeb link above for full details)
This is a slave port. You may also want to view the commits to the master port: cad/salome
24 Jan 2014 09:32:00 5.1.4_7	rene	Remove expired ports: 2013-12-22 devel/mico: Broken for more than 6 month 2014-01-22 cad/salome: depends on expired cad/salome-kernel 2014-01-22 cad/salome-netgenplugin: depends on expired cad/salome-kernel 2014-01-22 cad/salome-jobmanager: depends on expired cad/salome-kernel 2014-01-22 cad/salome-visu: depends on expired cad/salome-kernel 2014-01-22 cad/salome-kernel: does not configure 2014-01-22 cad/salome-multipr: depends on expired cad/salome-kernel 2014-01-22 cad/salome-smesh: depends on expired cad/salome-kernel 2014-01-22 cad/salome-gui: depends on expired cad/salome-kernel 2014-01-22 cad/salome-yacs: depends on expired cad/salome-kernel 2014-01-22 cad/salome-med: depends on expired cad/salome-kernel 2014-01-22 cad/salome-light: depends on expired cad/salome-kernel 2014-01-22 cad/salome-randomizer: depends on expired cad/salome-kernel 2014-01-22 cad/salome-sierpinsky: depends on expired cad/salome-kernel 2014-01-22 cad/salome-geom: depends on expired cad/salome-kernel 2014-01-22 devel/combat: depends on expired devel/mico
06 Jan 2014 12:21:33 5.1.4_7	rene	Deprecate and schedule for removal on 2014-01-22, depends on expired cad/salome-kernel. PR: ports/185111 Submitted by: rene Approved by: maintainer timeout (devel@stasyan.com , 14 days)
26 Oct 2013 00:52:36 5.1.4_7	gerald	Update to libmpc version 1.0.1 which brings the following fixes: - Switched to automake 1.11.6, see CVE-2012-3386. - #14669: Fixed extraction of CC from gmp.h. - Fixed case of intermediate zero real or imaginary part in mpc_fma, found by hydra with GMP_CHECK_RANDOMIZE=1346362345. This is on top of the following changes from version 1.0 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no invariant sections) for the documentation. - 100% of all lines are covered by tests - Renamed functions . mpc_mul_2exp to mpc_mul_2ui . mpc_div_2exp to mpc_div_2ui (Only the first 15 lines of the commit message are shown above )
20 Sep 2013 15:58:42 5.1.4_6	bapt	Add NO_STAGE all over the place in preparation for the staging support (cat: cad)
10 May 2013 09:23:06 5.1.4_6	miwi	- Broken fails to fetch
03 Feb 2013 18:16:55 5.1.4_6	makc	Bump PORTREVISON after devel/py-sip and devel/qscintilla2 update. x11-toolkits/py-qt: - mark BROKEN: does not build with latest devel/py-sip
01 Jun 2012 05:26:28 5.1.4_5	dinoex	- update png to 1.5.10
25 May 2012 01:50:36 5.1.4_4	makc	Chase PyQT update
22 Oct 2011 23:50:23 5.1.4_3	eadler	- remove maintainer tags from pkg-descr Approved by: portmgr Approved by: bapt (mentor)
15 Jul 2011 07:00:46 5.1.4_3	sunpoet	- Bump PORTREVISION for science/hdf5-18 shlib change
26 Feb 2011 10:23:19 5.1.4_1	thierry	Chase the upgrade of science/cgnslib to 2.5-5; this implies to switch some dependencies from science/hdf5 to science/hdf5-18. As a side note: I think that all ports depending on science/hdf5 could be switched to science/hdf5-18, by defining H5_USE_16_API when necessary, and then science/hdf5 could be deprecated. PR: ports/154736
04 Jan 2011 21:13:45 5.1.4	thierry	Update cad/salome* to 5.1.4. Warning: This port require gcc 4.4 build 20090512 or _EARLIER_ for successful _run_. PR: ports/152396 Submitted by: maintainer (Stas Timokhin)
15 May 2010 15:58:38 5.1.3_2	thierry	- Unbreak (incorrect use of bsd.autotools.mk) - Don't install useless documentation. PR: ports/143878 Submitted by: Stas Timokhin <devel (at) stasyan.com> (maintainer)
12 Feb 2010 22:15:16 5.1.3	pgollucci	SALOME is a free software that provides a generic platform for Pre and Post-Processing for numerical simulation. +Supports interoperability between CAD modeling and computation software (CAD-CAE link) +Makes easier the integration of new components on heterogeneous systems for numerical computation +Sets the priority to multi-physics coupling between computation software +Provides a generic user interface, user-friendly and efficient, which helps to reduce the costs and delays of carrying out the studies +Reduces training time to the specific time for learning the software solution which has been based on this platform +All functionalities are accessible through the programmatic integrated Python console This package contains MED module. WWW: http://www.salome-platform.org - Stas Timokhin devel@stasyan.com PR: ports/143469 Submitted by: Stas Timokhin <devel at stasyan.com>

Number of commits found: 14

Login
User Login Create account

Servers and bandwidth provided by
New York Internet, iXsystems, and RootBSD

This site
What is FreshPorts? About the authors Issues FAQ How big is it? Security Policy Privacy Blog Contact

Search
Enter Keywords: more...

Latest Vulnerabilities

seatd	Sep 16
chromium	Sep 14
cinny	Sep 13
element-web	Sep 13
nheko	Sep 13
consul	Sep 11
go	Sep 10
mpd5	Sep 09
python38	Sep 09
python36	Sep 07
python37	Sep 07
weechat	Sep 05
py-matrix-synapse	Sep 02
python39	Sep 02
chromium	Sep 01

11 vulnerabilities affecting 77 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-09-16 01:21:47

Ports
Home Categories Deleted ports Sanity Test Failures Newsfeeds

Statistics

Graphs
NEW Graphs (Javascript)

Calculated hourly:

Port count	46364
Broken	75
Deprecated	183
Ignore	265
Forbidden	4
Restricted	2
No CDROM	0
Vulnerable	33
Expired	107
Set to expire	158
Interactive	0
new 24 hours	2
new 48 hours	4
new 7 days	26
new fortnight	49
new month	109