*/*: Sunset 12.4-RELEASE/12-STABLE from ports tree
- Remove all references to defunct ARCH arm
- Remove all references to defunct ARCH sparc64
- Remove x11-drivers/xf86-video-sunffb which requires defunct sparc64
ARCH
- Remove sysutils/afbinit requires defunct sparc64 ARCH
- Remove all references to bktr driver
- Remove all references to defunct FreeBSD_12
- Remove all references to OSVERSION/OSREL corresponding to 12
- Remove conditionals in Mk/Uses/cabal.mk
- Remove sparc reference from Mk/Uses/qt-dist.mk
- Remove BROKEN_sparc64/NOT_FOR_ARCH=sparc64
- Remove BROKEN_FreeBSD_12* from:
- Remove OpenSSL patches from:
- Remove conditional flags for OSVERSION >= 1300000 to fixed flags.
Also move conditional flags for non sparc64/arm ARCH to fixed flags.
Reviewed by: brooks, jbeich, rene, salvadore
Differential Revision: https://reviews.freebsd.org/D42068
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
Fix a common grammar error: "can not" means the opposite of "cannot."
"Can not" means "it is possible not to," and "cannot" means "it is impossible
to."
For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.
This is part two of a multipart commit to bring armv7 ports to parity
with armv6.
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com -exp run
Mark some ports failing on power64. In cases where the error message
was a stub, provide a real one.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Reported by: swills
Cleanup $() variables in ports Makefiles.
Mostly replace with ${}, but sometime, replace with $$() because it is
what was intended in the first place. (I think.)
Sponsored by: Absolight
Update portaudio to v19/Remove portaudio2 [1]
Chase portaudio change
Add patches from debian for games/cultivation
Add patches from upsteam for audio/rezound
Mark py-fastaudio as broken
Approved by: maintainer
Fix linrad on latest gcc
I checked linrad upstream, and they still haven't fixed these two bugs. I am
surprised they haven't been reported yet. Without these fixes, linrad cannot be
built with gcc5.
the menu.c patch simply reverses the order of the condition. One must check the
bounds constraint first! It's a pretty dumb mistake but I've seen this kind
before.
The second one fails because -Werror is set. This took me a while because I
couldn't figure out the relationship between ADCHANS and rxchan. In any case,
setting 4 locations per channel did indeed allow the array to be big enough.
(at first I thought the loop was running too high, but I finally determined the
array was too small).
These were found on DragonFly that uses gcc5.
This patch has not been tested on FreeBSD but I can't how it could possibly
fail.
It would be good if the ham@ maintainer reports the issue upstream.
Updated patch files using make makepatch
PR: ports/199737
Submitted by: marino
Remove OSVERSION checks that do not make sense any more.
For example (${OSVERSION} >= 900000 && ${OSVERSION} < 900021) is always true,
as is (${OSVERSION} > 900002 || ${OSVERSION} < 900000 && ${OSVERSION} > 800107).
Regarding patches, when an EXTRA_PATCHES is no longer needed, I remove it, when
it is always needed, I renamed it, in one case, I merged two patches.
Differential Revision: https://reviews.freebsd.org/D2209
2 ports categories: Remove $PTHREAD_LIBS
Categories: net-p2p, comms
Note that qrq was not properly staged, it failed stage-QA.
aprsd failed check-plist; it had a plist orphan. Now it fails stage-QA
with a fs violation, but it may be acceptable. Fixes added to both.
approved by: PTHREAD blanket
Disable ALSA test completely. When the ALSA lib wasn't detected, was still
trying to link with libalsa.so. When it was detected, resulted in linking
with a non-dependant lib.
If there is enough demand, I can add OPTS for ALSA vs portaudio etc, but for
now just a hard dependency on portaudio will be enough.
Update to 4.02 and fix build errors with clang 5
Linrad-04.02 comes with many improvements. The first FFT can now run in
parallel in up to 6 separate threads. More efficient FFT implementations
are available for some hardware architectures.
The converter option is corrected.
Several bug corrections.
STAGEify and update to 4.00
Portaudio support
Improved AGC
Voice squelch
Spur removal
Support for the rtlsdr library
Reviewed by: db, skreuzer
Approved by: db, skreuzer (mentors)
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
- Remove CONFIGURE_TARGET hack in various bsd.*.mk
- USE_GNOME=gnometarget is now an no-op
Changes to individual ports, other than removing the CONFIGURE_TARGET hack:
= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
- comms/gnuradio
- science/abinit
- science/elmer-fem
- science/elmer-matc
- science/elmer-meshgen2d
- science/elmerfront
- science/elmerpost
= use x86_64 as ARCH
- devel/g-wrap
= other changes
- print/magicfilter
GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf
Total # of ports modified: 1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)
PR: 126524 (obsoletes 52917)
Submitted by: rafan
Tested on: two pointyhat 7-amd64 exp runs (by pav)
Approved by: portmgr (pav)
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
- Fix 'all-depends-list' target in cases if dependencies list is
very long and if some dependencies can't be added into the list.
[1]
- Fix FAM support. Make gamin the default FAM system. [2]
- Introduce new 'quicksearch' target to show only port, path and
info section of the matching ports. [3]
- Introduce new category - rubygems. [4]
- Fix stale dependencies while installing qmail slaveport and
another port that depends on qmail. [5]
- Add commentary for describes target in bsd.port.mk. [6]
- Fix warning issued during make index on archs !368. [7]
- Add USE_DOS2UNIX variable. If set to "YES", remove the ^M from
all files under ${WRKSRC}. If set to a string, remove in all files
under ${WRKSRC} with one of these names the ^Ms. [8]
- Add new variables PERL_RUN_DEPENDS and PERL_BUILD_DEPENDS by
checking the existance of the Perl modules with the "perl -e 'use
module;'" command. [9]
- Fix bsd.port.mk variable quoting issues. No quoting is necessary
anymore either in the Makefile or on the command line. Affected
variables include:
BROKEN
FORBIDDEN
IGNORE
MANUAL_PACKAGE_BUILD
NO_CDROM
NO_PACKAGE
RESTRICTED
[10]
- Add NOFETCHFILES variable. If set, don't download these files
from the ${MASTER_SITES} or ${MASTER_SITE_BACKUP} (but do from
${MASTER_SITE_OVERRIDE}). [11]
- Improve 'search' target output. [12]
- Add a new virtual category for Amateur Radio - hamradio. [13]
- Cleanup some old/unused pathes in bsd.port.mk. [14]
- Add @dirrmtry for plists which does the same as:
"@unexec rmdir %D/foo 2>/dev/null || true" [15]
- Remove virtual category - offix. [16]
- Use portsnap instead of cvsup or cvs on "make update" in
/usr/ports. [17]
- Move location of bsd.autotools.mk within bsd.port.mk [18]
- Add bsd.linux-rpm.mk, fix INSTALLS_SHLIB for Linux ports [19]
- Use new USE_RC_SUBR format for FreeBSD version >= 700007 [20]
- Replace the string "FreeBSD" by "The FreeBSD Project" in the
security warning [21]
- Add bsd.local.mk for local modification to ports framework. [22]
- Replace rcNG spelling by rc.d [23]
- Remove superfluous USE_REINPLACE. [24]
Special thanks to: linimon for spending hours with all these patches
clement for fixes
kris for help with pointyhat
PR: ports/86310 [1], ports/89498 [2], ports/83530 [3],
ports/83789 [4], ports/84053 [5], ports/86281 [6],
ports/87214 [7], ports/87234 [8], ports/87318 [9],
ports/87396 [10], ports/87605 [11], ports/87840 [12],
ports/88230 [13], ports/88493 [14], ports/88711 [15],
ports/88751 [16], ports/89281 [17], ports/89999 [18],
ports/90031 [19], ports/90150 [20], ports/90668 [21],
ports/91433 [23], ports/88754 [24]
Submitted by: mi [1], marcus [2], Lars Engels <lars.engels@0x20.net> [3],
pav [4, 16, 20, 24], garga [5], cperciva [6], vd [7],
edwin [8, 9, 11, 15, 21],
fenner [10], Arseny Nasokin
<tarc.po.cs.msu.su@tarc.po.cs.msu.su> [12],
Carl Makin <carl@stagecraft.cx> [13], arved [14],
NIIMI Satoshi <sa2c@sa2c.net> [17], thierry [18],
jylefort [19], linimon [22], dougb [23]
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
