Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

comms: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  'Big Bad Bob' Frazier <bobf@mrp3.com>
  *  <mr@freebsd.org>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Dolgov <fox@furry.spb.ru>
  *  Andrey Lykhin <lan31@inbox.ru>
  *  Anton Voronin <anton@urc.ac.ru>
  *  Brandon S. Allbery KF8NH <allbery@ece.cmu.edu>

Remove # $FreeBSD$ from Makefiles.

Pet portlint.

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.

Suggested by:	tijl

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Switch USES=compiler:gcc-c++11-lib to use base libc++ on 10.2+ systems

PR:		215192
Requested by:	dim
Exp-run by:	antoine
Approved by:	antoine

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.

The first part covered  ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.

PR:		214965
Reported by:	thierry

Cleanup a bit by passing necessary CMAKE_INSTALL_RPATH in Makefile

Github cleanup.

- Use the version tag instead of commit hash when they're the same.
- Remove unnneeded variables.
- Simplify go- ports when possible.
- Various fixes.

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

Missed a webkit in USE_QT5 mea culpa

Reviewed by:	jeff@baitis.net
Approved by:	jeff@baitis.net

A WSPR receiver/decoder using libsdr. This implementation embeds the original
WSPR Fortran code into a libsdr processing node, allowing to assemble a WSPR
receiver for various sources easily.

WWW: https://github.com/hmatuschek/sdr-wspr

PR:		207381
Submitted by:	Jeffrey Baitis <jeff@baitis.net>