04:05 Charlie Li (vishwin) 

python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal

Any missed ports, feel free to bump.

Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.

    06a08e6

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

16:28 Kai Knoblich (kai) 

converters/py-svglib: Update to 1.5.1

* Convert "do-test" target to USE_PYTHON=pytest while I'm here.

Changelog since 1.4.1:

https://github.com/deeplook/svglib/blob/v1.5.1/CHANGELOG.rst

    b548bc4

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

10:54 Kai Knoblich (kai) 

converters/py-svglib: Update to 1.4.1

* Switch to PyPI as the test suite is now fully included in the sdist.

Changelog since 1.3.0:

https://github.com/deeplook/svglib/blob/v1.4.1/CHANGELOG.rst

    48455bf

08:31 Kai Knoblich (kai) 

converters/py-svglib: Update to 1.3.0

Changelog:

https://github.com/deeplook/svglib/blob/v1.3.0/CHANGELOG.rst

    09f8a52

13:23 Bernhard Froehlich (decke) 

converters/py-svglib:	Add CPE information

Approved by:	portmgr (blanket)

    d5b2cdd

11:39 Kai Knoblich (kai) 

converters/py-svglib: Update to 1.2.1

Changelog:

https://github.com/deeplook/svglib/blob/v.1.2.1/CHANGELOG.rst

    83630c1

18:36 Stefan Eßer (se) 

Update CONFLICTS definitions in categories a* to c*

Update the CONFLICTS definitions of ports in the following categories:

- accessibility
- archivers
- audio
- benchmarks
- biology
- cad
- chinese
- comms
- converters

An attempt has been made to use generic conflicts patterns that do not
have to be updated whenever a new version of a conflicting port is
added to the ports system.

There is a misunderstanding that the port being built/installed has to
be omitted from the conflicts pattern. This is not true - the port
being built is implicitly non-conflicting due to logic in bsd.port.mk.

Approved by:	portmgr (implicit)

    bdd2d4a

19:22 Kai Knoblich (kai) 

converters/py-svglib: Re-add port

The port is being maintained by upstream fairly regularly again after a
lengthy hiatus:

Svglib is a pure-Python library for reading SVG files and converting
them (to a reasonable degree) to other formats using the ReportLab Open
Source toolkit.

Used as a package you can read existing SVG files and convert them into
ReportLab Drawing objects that can be used in a variety of contexts,
e.g. as ReportLab Platypus Flowable objects or in RML.

As a command-line tool it converts SVG files into PDF ones (but adding
other output formats like bitmap or EPS is really easy and will be
better supported, soon).

WWW: https://github.com/deeplook/svglib

    d7e0acb

08:24 bapt 

Deprecated ports broken for more than 6 month

 

16:05 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
converters)

 

21:56 bapt 

Mark as broken: does not fetch

 

02:33 wen 

- Add missing DEPENDS
- Add LICENSE

PR:             ports/151470
Submitted by:   C-S <c-s@c-s.li>

06:51 wen 

- Update to 0.6.3
- Update my mail address to FreeBSD

Feature safe:   yes

10:22 miwi 

- Update to 0.6.2

22:20 miwi 

Svglib is an experimental library for reading SVG files and converting
them(to a reasonable degree) to other formats using the Open Source
ReportLab Toolkit. As a package it reads existing SVG files and returns
them converted to ReportLab Drawing objects that can be used in a
variety of ReportLab-related contexts, e.g. as Platypus Flowable objects
or in RML2PDF. As a command-line tool it converts SVG files into PDF
ones.

WWW:    http://pypi.python.org/pypi/svglib/

PR:             ports/128752
Submitted by:   Wen Heping <wenheping at wenheping.com>