graphics/poppler: bump dependent ports

graphics/poppler: bump dependent ports

*/*: Bump port revision after mupdf update

deskutils/lumina-pdf: More targeted WWW

https://lumina-desktop.org has no information about components

PR:             253206
Reported by:    grahamperrin

graphics/poppler: bump consumers of graphics/poppler

Bump after rupdate in 478df79a3071b399f648107456cf371587e84a3f

graphics/poppler: bump revision of consumers

lumina*: Adopt from ports@

Taking over maintenance of the following ports
and beginning work on upstream code

deskutils/lumina-archiver
deskutils/lumina-calculator
deskutils/lumina-fileinfo
deskutils/lumina-fm
deskutils/lumina-mediaplayer
deskutils/lumina-pdf
deskutils/lumina-photo
deskutils/lumina-screenshot
deskutils/lumina-textedit
x11/lumina-core
x11/lumina-coreutils
x11/lumina

graphics/poppler: bump dependencies

graphics/poppler: bump consumers after update to 23.04

graphics/poppler was updated in 06339c451266f5843e53bd6406c81a89eedd4ab1

graphics/poppler: bump dependencies

Follow-up to 9b78681895a5a5b7225299242098f7f2f27d959c

graphics/poppler: bump dependencies

graphics/poppler: bump PORTREVISION of dependencies

- after update to 22.11 in d01d0d73b169

*/*: Reset maintainership

graphics/poppler: bump port revision of poppler consumers

- poppler was updated to 22.10 in df406767857ddfc6d9580d72b1613a7cf8579bbc

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

graphics/poppler: bump port revision of consumers after upgrade to 22.09

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics/poppler: bump dependencies

Bump port revisions of poppler users after
04f1b0c1a895851aed9221282c1a503bc7415a37

graphics/poppler: bump PORTREVISION of poppler consumers

graphics/poppler: bump port revision of consumers after 22.06 upgrade

graphics/poppler: bump portrevision of consumers

graphics/poppler: bump portrevision of consumers

Bump revisions after 0ee787592d5a due to so-version bump.

PR:		 263009

graphics/poppler: bump consumers

Bump consumers of graphics/poppler after
e25859e09380f5930718094423dc8616cbb202b3

lumina: Update to 1.6.2

Changes:
 - 1.6.1: https://lumina-desktop.org/post/2021-10-05/
 - 1.6.2: https://lumina-desktop.org/post/2021-12-25/

PR:		259965
Reported by:	jwb
Tested by:	jwb

graphics/poppler: update to 21.12

Release 21.12.0:
    core:
         * Add API to add images
         * CairoOutputDev: Fix de-duping of Flate images
         * Fix crash on broken files when using non-default
ENABLE_ZLIB_UNCOMPRESS. Issue #393
         * Minor code improvements

    glib:
         * Add API for validation of signatures
         * Add API to read/save to file descriptor

    utils:
         * pdftohtml: Reduce sensitivity of duplicate detection. Issue #1117

    build system:
         * Increase C++ standard to 17

Exp-run by:	antoine
PR:		260344

Bump PORTREVISION of graphics/poppler consumers.

PR:		259656

graphics/poppler: bump consumers after 2dee0997fbc9ee01991f73f0fa55f9b18908a264

poppler: bump revisions of users

Bump the remaining users of poppler after
d98b56f1deb5b6a03a7e04fc16192ecb2af9df1e

PR:		258206

Cleanup: for ports under d* categories, drop redundant GH_{ACCOUNT,PROJECT}.

graphics/poppler: update to 21.08.0

Release 21.08.0:
        core:
         * Add API to allow addition and modification of outlines into a PDF
         * Use additional samples to test for constant parts of an axial
gradient
         * forms: Create fallback fonts for some well known font names
         * Support reading the PDF Version from the Catalog
         * Fix XRef::copy when there are modified objects
         * Take into account that Date string may be in unicode
         * JBIG2Stream: Fix regression in "Do not consider a size-0 to be an
error"
         * Replace a local bubble sort implementation by std::sort
         * Fix issues with malformed files

        build system:

graphics/poppler: update to 21.07.0

Release 21.07.0:
        core:
         * JBIG2Stream: Do not consider a size-0 to be an error. Issue #535
         * PSOutputDev: fix off-by-one error for image masking in L1/L2 output.
Issue #1088
         * CairoOutputDev: Fix memory leak on broken files
         * Minor code improvements

        build system:
         * set C standard to 11 without extensions

Exp-run by:	antoine
PR:		256981

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

graphics/poppler: update to 21.06.0

Release 21.06.0:
        core:
         * Fix rendering of some extended latin1 characters in annotations.
Issue #1070
         * Support some not so well formed documents with password. Issue #1083
         * Add API to get notified if the xref is reconstructed
         * Add somewhat fancier left/right signature visual representation
         * Fix crashes in malformed files
         * Minor code improvements

        qt6:
         * Change some functions to return std::unique_ptr

        qt5/qt6:

graphics/poppler: update to 21.05.0

Release 21.05.0:
        core:
         * Fix crashes in malformed files
         * Export SplashFont* symbols used by Scribus
         * Minor code improvements

        qt5/qt6:
         * Make sure new signatures are always properly oriented
         * Allow to pass the border width when signing

        glib:
         * Enhance find to support multi-line matching

        utils:
         * pdftoppm: Fix regression when using single scaleTo. Issue #1062

        build system:
         * Allow to disable building manual tests

PR:		255562
Exp-run by:	antoine

graphics/poppler: update to 21.04.0

Release 21.04.0:
        core:
         * Hide symbols by default
         * TextSelectionDumper: fix word order for RTL text
         * Fix rendering of text in some files. Issue #1052
         * Implement rendering of Masks of Image subtype. Issue #1058
         * Forms: fix unclicking standalone form buttons. Issue #1034

        glib:
         * Expose more fields from MediaRendition in PopplerMedia
         * Use stock glib macro to define boxed type
         * Remove incorrecly used volatile from enum type registration code

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

graphics/poppler: update to 21.03.0

Release 21.03.0:
        core:
         * Fix parsing text in some broken pdf files. Issue #1040
         * Fix memory issue when using threads. Issue #1050
         * TextSelectionDumper: Fix getText() for space after word
         * Change signature of OutputDev:tilingPatternFill
         * Make PDFDocBuilder return a std::unique_ptr
         * Improve well formed check for shading functions
         * Fix leak in case of fread failing
         * Fix memory leak in broken file in JBIG2Stream::readGenericBitmap
         * PSOutputDev: Fix stack overflow in broken files

        glib:

graphics/poppler: update to 21.02

Release 21.02.0:
        core:
         * GfxCal*ColorSpace: introduce Bradford transform for chromatic
adaptation
         * Fix memory leak if saving the file fails
         * Internal code improvements
         * Fix various issues handling broken files
         * Make checkedAdd work for long long in MSVC

        qt5:
         * Properly export NewSignatureData class
         * Fix regression in QIODeviceOutStream + MSVC

        qt6:
         * Properly export NewSignatureData class
         * Fix regression in QIODeviceOutStream + MSVC

        utils:
         * pdftohtml: Fix error() parameter type

PR:		253183
Exp-run by:	antoine

graphics/poppler: update to 21.01.0

Release 21.01.0:
        core:
         * Faster routines for jpeg decoding
         * Fix reading signatures in encrypted files
         * Add white point correction when lcms is used
         * JBIG2Stream: Fix byte counting
         * Fix potential data loss if we try to fetch a non existing Ref after
modifying the document
         * Specifically use DeviceGray instead of DefaultGray for softmasks
         * Fix various issues handling broken files

        utils:
         * pdftocairo: Setmode binary for windows
         * pdfsig: Add hability to digitally sign files

graphics/poppler: update to 20.12.0

Changelog:
        core:
         * Draw better circles for circle annotations
         * Fix annotation line width if no appearance stream or style are given
         * Tweak rendering of highlight annotations
         * Fix border rendering of some annotations
         * Fix rendering of some files. Issue #976 Issue #567
         * PSOutputDev: provide options to set the rasterization color space and
ICC profile
         * PSOutputDev: for splashModeCMYK8 and language level >=2 activate
overprint emulation
         * PSOutputDev: use the DeviceN8 bitmap for rasterization with
CMYK-output + overprint
         * Use the font name without subset tag when querying for a system font
         * Splash: Fix wrong x adjustment during clipping
         * Splash: Fix blitImage in uncolored tiling patterns

graphics/poppler: update to 20.11.0

Release 20.11.0:
        core:
         * More work on rendering of standalone Annot Widgets. Issue #806
         * Fix crashes in embedded file handling on broken files. Issue #967
         * Fix uninitialized memory read on broken files
         * Save a bit of memory in Dict data

        cpp:
         * Fix crashes in embedded file handling on broken files. Issue #966

        utils:
         * pdftohtml: HTML and XML output includes font opacity.

graphics/poppler: update to 20.10.0

Release 20.10.0:
        core:
         * Filter out repeated forms
         * Implement EmbedStream::reset()
         * CairoOutputDev: evict just font faces owned solely by cache.
         * Splash: Rename Yd to Ydown, Xu to Xup, etc.
         * Splash: fix crash in out-of-memory situation.
         * Fix some undefined behaviour situation with forged files

PR:		250052
Exp-run by:	antoine

graphics/poppler: update to 20.09.0

Release 20.09.0:
        core:
         * Compability fix for Forms
         * Fix fetching of Objects failing in some cases
         * Fix clearing date in Annot setModified/setDate
         * TextSelectionPainter: support glyphless fonts
         * Splash: Don't try read past end of image
         * avoid abort() on large memory allocation
         * Fix memory leak on broken files
         * Fix potential invalid memory read
         * Small code improvements

        qt5:

Bump revisions of poppler consumers after r544863

graphics/poppler: update to 0.90

Release 0.90.0:
        core:
         * Color profile tweaks
         * Small signature improvements
         * BBoxOutputDev: Fix calculation when type3 fonts are involved
         * Fix potential crash when reading Forms
         * Fix infinite loop in broken file
        glib:
         * Fix adding annots in rotated pages
         * Add ability to reset forms
         * Several fixes to the documentation
        qt5:
         * Make it clear we require Qt 5.5

graphics/poppler: update to 0.89.0

Release 0.89.0:
        core:
         * Add support for ResetForm action. Issue #225
         * Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
         * Fix exporting to PS of some files with CID fonts
         * Use ICC profiles in PS output (if new enough lcms is used)
         * Allow almost-singular tiling pattern matrices. Issue #894
         * Fix memory leak when failing to load some fonts
         * CairoOutputDev: Use stroke opacity when clipping to a stroke path
         * CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190

        glib:
         * Add poppler_movie_get_aspect

        cpp:
         * Add the font infos to the text_box object

Exp-run by:	antoine
PR:		246848

graphics/poppler: update to 0.88.0

Release 0.88.0:

        core:
         * Support Widget Annotation Buttons not linked to any Form
         * SplashOuputDev: Use stroking opacity when clipping to a stroke path
         * Handle 1 bit RGB images in ICC colorspace
         * Internal code improvements

        qt5:
         * Add Document::signatures. Returns signatures not attached to any page
         * ArthurOutputDev: Fix font hinting
         * ArthurOutputDev: Set the opacity when filling with axial gradients
         * ArthurOutputDev: Implement the clipToStrokePath method

deskutils/lumina-pdf, deskutils/lumina-calculator: incorrect definition of i18n
files in pkg-plist

Port tries to install translation files even when the NLS option is set to OFF.

 - fix pkg-plist

PR:		245914, 245912
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D24625

deskutils/lumina-pdf: Prepare for Qt5-5.14

PR:		244964

graphics/poppler: update to 0.87.0

Release 0.87.0:
        core:
         * Fix crashes due to inconsistent vtables for Clang builds
         * Fix leak in broken files
         * Internal code improvements

        qt5:
         * Add option to get form choice for export value
         * ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695

        glib:
         * Internal code improvements

         utils:
         * pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest

PR:		245150
Exp-run by:	antoine

Update poppler to 0.86.1

Release 0.86.1:
        core:
         * Fix regression in Browse Link handling
         * Internal code improvements

Release 0.86.0:
        core:
         * Fix link content exfiltration attack
         * Splash: Implement gouraudTriangleShadedFill for some non parametrized
shadings. Issue #881
         * Fix case unsensitive search for Old Hungarian, Warang Citi,
Medefaidrin and Adlam
         * Internal code improvements

        glib:

x11/lumina: Update to 1.6.0 and Take MAINTAINER'ship

  - Update to 1.6.0
  - Take MAINTAINER'ship
  - Add missing USE_GL
  - Fix order of options in Makefiles

Changelog:
  - Lumina: https://github.com/lumina-desktop/lumina/compare/v1.5.0...v1.6.0
  - Lumina-pdf:
https://github.com/lumina-desktop/lumina-pdf/compare/v1.5.0...v1.6.0
  - Lumina-calculator:
https://github.com/lumina-desktop/lumina-calculator/compare/v1.5.0...v1.6.0

PR:	243895
Reviewed by:	mat, tcberner
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D23603

Bump revision of poppler dependencies

- poppler was updated in r525051, bump revisions

graphics/poppler: update to 0.84.0

Release 0.84.0:
        core:
         * Fix crash when converting from Unicode to ASCII-7
         * Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
         * JBIG2Stream: fix potential crash in malformed documents
         * JBIG2Stream: fix leak in reset() if called several times
         * Internal code improvements

        utils:
         * pdfimages: Add error message if first page is larger then number of
pages.
         * pdfinfo: Improved paper size recognition
         * pdfsig: Fix exit code when dumping signatures
         * pdftocairo: Error out when even/odd selects 0 pages

graphics/poppler: update to 0.82.0

Release 0.82.0:
        core:
         * Fix not being able to open some files. Issue #832
         * Fix crashes in malformed files
         * Fix memory leak on broken files
         * Minor performance improvements
         * Minor code improvements

        glib:
         * Add poppler_document_new_from_bytes
         * PopplerAttachment: Silence deprecation warnings for ctime/mtime

        build system:
         * pdf-inspector: Support builddir != srcdir
         * Install Cairo* headers if Cairo has been found

Thanks to adridg@ for fixing all the fallout.

Exp-run by:	antoine
PR:		241532
Approved by:	gnome (kwm, implicit)

deskutils/lumina-pdf: fix build on GCC architectures

Add include memory to drawablepage.h:
In file included from Renderer-poppler.cpp:2:
drawablepage.h:34:8: error: 'unique_ptr' in namespace 'std' does not name a
template type
   34 |   std::unique_ptr<Poppler::Page> page;
      |        ^~~~~~~~~~
drawablepage.h:7:1: note: 'std::unique_ptr' is defined in header '<memory>'; did
you forget to '#include <memory>'?
    6 | #include <poppler/qt5/poppler-qt5.h>
  +++ |+#include <memory>
    7 |

PR:		241002
Approved by:	ken@ixsystems.com (maintainer timeout), linimon (mentor)

graphics/poppler: update to 0.81.0

Release 0.81.0:
        core:
         * Splash: Always enable support for CMYK rasterization
         * CairoOutputDev: Check scaled dimensions for 0. Issue #737
         * BaseCryptStream: Fix potential uninitialized memory read
         * SplashBitmap: Fix wrong width condition for splashModeDeviceN8
         * Fix crashes in malformed files

PR:		240781
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)

x11/lumina: fix build on gcc platforms, re-adding USES=compiler:c++11-lang

- and deleting the two ports I should have deleted in the previous commit

PR:		240749
Submitted by:	Piotr Kubaj <pkubaj@anongoth.pl>

x11/lumina: upgrade 1.4.1 -> 1.5.0

- Remove deskutils/lumina-notify (upstreamed)
 
https://github.com/lumina-desktop/lumina/commit/89ad0095d7da09158778b5afae9beeaa0bd98d38
- Remove deskutils/lumina-xdg-entry (upstreamed)
 
https://github.com/lumina-desktop/lumina/commit/0069a052e1cbef588e8f93a31314965b0c2af68a
- Fix variables order (pet portlint)
- Alphabetize USE_QT
- Update knob to use options helpers
- Remove GH_TAGNAME (except for deskutils/lumina-pdf and
  deskutils/lumina-calculator which haven't release tag)
- Change GH_ACCOUNT from "trueos" to "lumina-desktop"
- Add a new port deskutils/lumina-photo
- Change I18N option to well know NLS option

PR:		240749
Submitted by:	Loic Bartoletti <lbartoletti@tuxfamily.org>
Approved by:	JT Pennington <jt@ixsystems.com> (maintainer)
Differential Revision:	D21749

graphics/poppler: update to 0.80.0

Release 0.80.0:
core:
 * Annotations: Implement support for setting a different text in the appearance
stream than the real text
 * Splash: Optionally use small_vector from boost
 * Fix memory leaks on broken files
 * Fix abort on broken files
 * Small code simplifications
 * Remove USE_FIXEDPOINT support. Issue #821

qt5:
 * Fix MSVC build
 * Add subsitute-font information
 * Fix since marker of some functions

graphics/poppler: update to 0.79.0

Release 0.79.0:
        core:
         * Fix regression on TextSelectionPainter
         * Fix parsing of DefaultAppearance
         * Fix memory leak in PostScriptFunction
         * Fix crashes in fuzzed files

        qt5:
         * Implemented support for setIcon by changing appearance
         * Added option to set the form available to print
         * QString::null is deprecated, use QString()
         * Replace deprecated qStableSort with std::stable_sort

        build system:
         * Turn README into README.md and expand it

PR:		239277
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

graphics/poppler: update to 0.78.0

Release 0.78.0:
        core:
         * Fix line annotation arrows for usage in dimensioning
         * Handle Ink annots without an InkList but with an AP
         * Fix typos preventing parsing of Movie start and duration
         * Fix crash on malformed files

        glib:
         * Add poppler_document_create_dests_tree()
         * Don't use the deprecated g_type_class_add_private()
         * Document the differences between render() and render_for_printing()
         * Fix introspection for poppler_document_new_from_data
         * Don't create PopplerInputStream with length 0. Issue #414

graphics/poppler: update to 0.77.0

Release 0.77.0:
        core:
         * Fix crash on signature handling. Issue #766
         * Fix small memory leak in SignatureHandler::getCertificateInfo
         * Splash: Restrict filling of overlapping boxes. Issue #750
         * Fix crash on malformed files

        qt5:
         * Fix optional content handling with exclusive layers

        cpp:
         * Make render_page thread-safe

        utils:
         * pdfsig: Fix small memory leak
         * pdftotext: Fix typo in manpage

PR:		238115
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)

graphics/poppler: update to 0.76.1

From Changelog at https://poppler.freedesktop.org/releases.html :

Release 0.76.1:
        core:
         * Make the mul tables be calculated at compile time with constexpr.
         * splash: Fix compile with SPLASH_CMYK enabled
         * Some typo fixing in error messages

        qt5:
         * Fix regression in annotation handling

        build system:
         * Fix some typos in build system output and comments

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call

- Add LICENSE_FILE
- Update WWW

Approved by:	portmgr blanket

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Fix build with GCC-based architectures.

PR:		232407 232414 232415 232420 232425 232449 232724 232753
Submitted by:	Piotr Kubaj
Approved by:	portmgr (tier-2 blanket)

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

*/lumina-*: Unbreak I18N options

===> Checking for items in pkg-plist which are not in STAGEDIR
Error: Missing: share/lumina-desktop/i18n/l-screenshot_af.qm
Error: Missing: share/lumina-desktop/i18n/l-screenshot_ar.qm
Error: Missing: share/lumina-desktop/i18n/l-screenshot_az.qm
...

- Add missing USE_QT5=printsupport to lumina-textedit

PR:		224860
Submitted by:	tobik
Approved by:	jt@ixsystems.com (maintainer), araujo

Add lumina-pdf version 1.4.1.

PR:		ports/224318
Submitted by:	JT Pennington <jt@ixsystems.com>
Sponsored by:	iXsystems, Inc.