deskutils/simpleagenda: unbreak the port and update to version 0.46

Add TEST_TARGET and chase HTTP/1.1 301 redirection in the WWW line.

deskutils/simpleagenda: Mark BROKEN

- Fails to build with unknown type name 'APPKIT_EXPORT_CLASS'
- Return to pool

*/*: Fix build with llvm16 on 13.2-STABLE

As like as HEAD(14.0-RELEASE) llvm16 was merged in base for 13.2-STABLE
with the OSVERSION 1302507.

- Utilize USE_CXXSTD=c++14 or similar solution where applicable
- Update conditionals to addtionally check for OSVERSION greater than
  1302507 and less than 1400000

Approved by:	portmgr (blanket)
Sponsored by:	The FreeBSD Foundation

deskutils/simpleagenda: Fix build with llvm16

- Pet portclippy
- Utilize USES=localbase
- Adopt port

Sponsored by:	The FreeBSD Foundation

audio/opus: bump consumers after update to 1.4

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Update a few GNUstep ports:

 * devel/gnustep-make: Update to 2.8.0
 * lang/gnustep-base: Update to 1.27.0
 * x11-toolkits/gnustep-back: update to 0.28.0
 * x11-toolkits/gnustep-gui: update to 0.28.0

Also bump PORTREVISION on dependent ports.

Sanitize COMMENT per Section 5.6 of the FreeBSD Porter's Handbook (part 6).

deskutils/simpleagenda: unbreak after r528448

Pointy hat:	tcberner
PR:		239167
Submitted by:	lightside <lightside@gmx.com>

Return theraven's ports to the pool after safekeeping his commit bit.

Move Objective-C ports to the v2 GNUstep ABI.

 * Bump the LLVM revision used for GNUstep to 7, the minimum to support
   the new ABI.
 * GNUstep-back does not work with lld, so mark it to use Gold (BFD LD
   doesn't seem able to link Objective-C things).
 * Turn off some annoying debug logs in GNUstep back, which generate
   several messages per second when you move the mouse.  These should
   never have been enabled in a release build anyway.
 * Downgrade Cenon to 4.0.2.  This was the last version to actually work
   with GNUstep (the later ones use XCode >= 5 .xib files, which GNUstep
   can't parse).
 * Update gorm to git head. The current release doesn't work with the
   new Objective-C ABI, but -head has the patches to fix it.
 * Update PikoPixel and add it to the gnustep-app meta-package.
 * Update the three core GNUstep packages to the latest release.
 * Update gnumail and pantomime to the latest release and fix a linking
   error with the new ABI.
 * Update GNUstep FTP to the latest version.

Reviewed by:	bapt (previous version)

Update Objective-C LLVM version to 6.0.

Fixes aarch64 build.  Reduces depends on obsolete LLVM 4.0.

PR:		230116
Submitted by:	mikael.urankar@gmail.com
Approved by:	theraven (prior version)
Sponsored by:	DARPA, AFRL

Bump PORTREVISION on ports depending on devel/libical.

PR:		226460

Fix configure options for gnustep-make

We were not setting the flag to select the GNUstep ABI, so were defaulting to
using the GCC-compatible version, which was likely to trigger a lot of subtle
bugs.  This was noticed when C++ exceptions thrown through Objective-C stack
frames caused segfaults.

Update GNUstep core libraries.

Update the default Objective-C compiler.

Fix various build failures in GNUstep ports from newer versions of the GNUstep
core libraries and from changes to GNUstep Make.

Update various ports that use GNUstep and bump the portrevision of the ones
that haven't had a new release.

- Update devel/libical to version 2.0
- Bump PORTREVISION in all consumers
- mail/claws-mail-vcalendar now builds, remove IGNORE
- Mark devel/libical-glib as BROKEN

Release Highlights
    WARNING: Version 2 IS NOT Binary Compatible with Older Versions
    Version 2 is Source Compatible with Older Versions
    Lots of source code scrubbing
    [New] RSCALE support (requires libicu from http://www.icu-project.org)
    [New] CalDAV attachment support (draft-daboo-caldav-attachments)
    [New] Resurrect the Berkeley DB storage support
    [Bug] issue83: Incorrect recurrence generation for weekly pattern
    Handle RRULEs better
    Handle threading better

PR:		218711
Submitted by:	myself
Approved by:	maintainer timeout

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Make all GNUstep ports install into the System domain so that the Local domain
is available for stuff built from source.

Some ports were already installing in the System domain, for these just remove
the Makefile lines explicitly specifying the install domain.

The rest are installed in the Local domain, remove any overrides, update their
pkg-plists and any explicit paths in the Makefiles and then bump port revision.

Approved by:	bapt (mentor)
Differential Revision:	https://reviews.freebsd.org/D2977

Convert bsd.gnustep.mk to USES=gnustep

Simplify gnustep ports
Hook into the regular ports framework:
- LIB_DEPENDS for library dependencies
- Use regular USE_LDCONFIG

Reuse USES=objc (automatic)
USE_GNUSTEP is now a macro to set the dependencies and build feature needed.
Accepted arguments: back base build gui

Merge deskutils/preferencepanes into deskutils/systempreferences

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Bump PORTREVISION on more ports that depend on libgcrypt after the update
in r363436 and remove the UPDATING entry because it did not guarantee
that all ports were updated nor that they were updated in the right order.
Also remove libgcrypt.la again.

PR:		192342
Approved by:	portmgr (implicit, bump unstaged ports)

Stage support

Update to 1.0.

Update Comment
Add LICENSE blob.
Stagify.

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in deskutils

Add NO_STAGE all over the place in preparation for the staging support (cat:
deskutils)

Update to latest GNUstep core libraries.
Update dependent packages with more recent releases.
Remove old and bit-rotted ones.
Switch to using clang 3.3 and libobjc2 1.7 by default, so modern Objective-C
features work out of the box and remove a lot of configurable options for
sub-optimal (and, often, unsupported / deprecated upstream) configurations.
Take maintainership of GNUstep-related ports.

Several of the ports left in have scary warnings which mean that they are likely
broken in lots of cases.  Future commits will fix them.

Approved by:	bapt

-Update devel/libical to 0.48.
-Update the header
-OPTIONSng
-Use the ltverhack to correct the shared library version (44 -> 0).

Bump the rest ports that depend on devel/libical because of shared library
version has been changed. Document the update in UPDATING.

PR:		ports/173540
Remind by:	Marcin Cieslak <saper@saper.info>

- cleanup comments
Feature safe: yes

- Mark as BROKEN:
Compiling file AppController.m ...
In file included from
GNUstep/System/Library/Headers/GNUstepBase/GSObjCRuntime.h:85,
                 from
GNUstep/System/Library/Headers/Foundation/NSObjCRuntime.h:95,
                 from GNUstep/System/Library/Headers/Foundation/NSObject.h:30,
                 from
GNUstep/System/Library/Headers/Foundation/FoundationErrors.h:29,
                 from GNUstep/System/Library/Headers/Foundation/Foundation.h:33,
                 from GNUstep/System/Library/Headers/AppKit/AppKit.h:40,
                 from AppController.m:3:
GNUstep/System/Library/Headers/ObjectiveC2/objc/runtime.h:297: error:
                 expected ')' before 'sel1'
gmake[3]: *** [obj/SimpleAgenda.obj/AppController.m.o] Error 1

Reported by:	pointyhat

- reset MAINTAINER

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- update to 0.42

- use USE_GNUSTEP_CONFIGURE
this fixes build with base gcc

- update to 0.41.1

LICENSE GPLv2

- drop USE_GNUSTEP_PREFIX

- update to 0.41

- update to 0.40

- update to 0.39

- cleanup ADDITIONAL_LIB_DIRS

- fix buildwith custom LOCALBASE
Reported by:    QAT

- update to 0.38

SimpleAgenda is a simple calendar and agenda application.
Based on libical, SimpleAgenda handles multiple local and distant
(through webcal) calendars.

Features
* multiples agendas
* monthly calendar, day view and summary
* create, resize and move appointments easily
* export individual appointments as files and to pasteboard
* changing rapidly
* open to suggestions and friendly with contributors !

LICENSE: GPL2 or later

WWW: http://wiki.gnustep.org/index.php/SimpleAgenda.app