| Port details |
- aphpbreakdown Code-Analyzer for PHP for Compatibility Check-UP
- 2.2.2 devel
 =0      2.2.2Version of this port present on the latest quarterly branch. - Maintainer: freebsd@code-mesa.com
- Port Added: 2017-12-06 15:55:55
- Last Update: 2023-04-16 18:09:23
- Commit Hash: 0ac3a69
- Also Listed In: www
- License: BSD2CLAUSE
- WWW:
- https://gitlab.code-mesa.com/code-mesa/aphpbreakdown/
- Description:
- This software analyzes all files of your project and collect all
PHP classes, functions and constants found in your project. For the
collection of classes, functions and constants it determined all
modules of PHP needed to be installed on the webserver for your
project.
To display the result of the analysis you can choose different ways.
One way is to display an output on your command line. But what do
you do if you don't have a command line access on the server you
want to test? Then you use the testfile generator of aPHPbreakdown!
It generates a testfile you can upload to the webserver, or sent
it to you customer to upload it, and run it very simple in the
browser.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- php81-aphpbreakdown>0:devel/aphpbreakdown
- Conflicts:
- CONFLICTS_INSTALL:
- Conflicts Matches:
-
There are no Conflicts Matches for this port. This is usually an error.
- To install the port:
- cd /usr/ports/devel/aphpbreakdown/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/aphpbreakdown
- pkg install php81-aphpbreakdown
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: php81-aphpbreakdown
- Package flavors (<flavor>: <package>)
- php81: php81-aphpbreakdown
- php80: php80-aphpbreakdown
- php82: php82-aphpbreakdown
- distinfo:
- TIMESTAMP = 1535474377
SHA256 (aphpbreakdown-2.2.2.phar) = b425f359762948f58d3672228b559f6b44cf6222fda1e7b75da72403d5c10ce4
SIZE (aphpbreakdown-2.2.2.phar) = 284415
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Runtime dependencies:
-
- php.h : lang/php81
- tokenizer.so : devel/php81-tokenizer
- phar.so : archivers/php81-phar
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- devel_aphpbreakdown
- USES:
- php:flavors
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
2.2.2
16 Apr 2023 18:09:23
 |
Muhammad Moinur Rahman (bofh) |
*/*: Remove merged or non-existent USE_PHP directives
- Remove USE_PHP=hash which is available in default php installation of
all versions of php
* security/pear-Horde_Crypt_Blowfish: Remove OPTION MHASH
- Remove USE_PHP=json which is available in default php installation of
all versions of php
* devel/pear-PHPTAL: Remove OPTION JSON
* www/ilias: Remove OPTION SCORM2004
- Remove USE_PHP=mssql which is no longer available in php from php80
and later and has been replaced with sqlsrv module which is Windows
only
* www/codeigniter: Remove OPTION MSSQL
* www/moodle311: Remove OPTION MSSQL
* www/moodle39: Remove OPTION MSSQL (Only the first 15 lines of the commit message are shown above  ) |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2.2.2
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
2.2.2
10 Jan 2022 15:15:39
|
Stefan Eßer (se) |
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port (Only the first 15 lines of the commit message are shown above ) |
2.2.2
16 Oct 2021 09:51:39
|
Jimmy Olgeni (olgeni) |
*: fix tab vs. space issues, and comments according to the guide. |
2.2.2
07 Apr 2021 08:09:01
|
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
2.2.2
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2.2.2
02 Feb 2019 09:30:38
 |
amdmi3 |
- Fix whitespace
- Update WWW
Approved by: portmgr blanket |
2.2.2
28 Aug 2018 16:40:58
|
joneum |
Update to 2.2.2
Changelog:
- Output of file analyzing hase changed for better readability
- fixes a wrong module count on --console-basic output
PR: 230745
Submitted by: maintainer |
2.2.1
05 Aug 2018 11:28:07
|
riggs |
Update to upstream version 2.2.1
PR: 230340
Submitted by: freebsd@felix.flornet.de
Approved by: freebsd@code-mesa.com (maintainer)
MFH: 2018Q3 |
2.2.0
14 Jun 2018 08:21:12
|
pi |
devel/aphpbreakdown: update 2.1.0 -> 2.2.0
- Added support for ignoring modules by file
- CI File will only exit if a module is missing.
Missing functions, classes and constants are displayed as
before but don't exit with error.
PR: 228980
Submitted by: Felix Flor <freebsd@felix.flornet.de>
Approved by: freebsd@code-mesa.com (maintainer)
Relnotes: https://gitlab.code-mesa.com/code-mesa/aphpbreakdown/blob/master/CHANGELOG.md |
2.1.0
25 May 2018 11:20:55
|
tz |
devel/aphpbreakdown: Update from 1.0.0 to 2.1.0
Changelogs:
- http://gitlab.code-mesa.com/code-mesa/aphpbreakdown/tags/2.0.0
- http://gitlab.code-mesa.com/code-mesa/aphpbreakdown/tags/2.1.0
While here also introduce PHP Flavors to this port
PR: 227610
Submitted by: Felix Flor <freebsd@felix.flornet.de>
Differential Revision: https://reviews.freebsd.org/D15192 |
1.0.0
06 Dec 2017 15:55:46
|
tz |
New port: devel/aphpbreakdown
This software analyzes all files of your project and collect all PHP classes,
functions and constants found in your project. For the collection of classes,
functions and constants it determined all modules of PHP needed to be installed
on the webserver for your project.
To display the result of the analyze you can choose different ways. One way is
to display an output on your command line. But what do you do if you don't have
a command line access on the server you want to test? Then you use the testfile
generator of aPHPbreakdown! It generates a testfile you can upload to the
webserver, or sent it to you customer to upload it, and run it very simple in
the browser.
WWW: http://gitlab.code-mesa.com/code-mesa/aphpbreakdown/
PR: 223867
Submitted by: Felix Flor <freebsd@felix.flornet.de> |
As an Amazon Associate I earn from qualifying purchases.