devel/arm-elf-binutils: Moved man to share/man

Approved by:    portmgr (blanket)

devel/arm-elf-binutils: Remove USES=makeinfo

- The usage of makeinfo is actually a NOOP here as the info files are
  deleted at post-install stage. So fake the presence of makeinfo.
- Pet portclippy

devel/arm-elf-binutils: Update to 2.39

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

devel/arm-elf-binutils: Add CPE information

Approved by:	portmgr (blanket)

devel/arm-elf-binutils: Update to 2.37

Drop maintainership.

Remove # $FreeBSD$ from Makefiles.

devel/arm-elf-binutils: Update to 2.35.1

- Use tar:xz to match devel/binutils and download a smaller tarball

Reported by:	danfe

- Update to 2.35

- Update to 2.34

- Update to 2.33.1
- Add LICENSE

- Update to 2.32

- Update to 2.31.1

- Update to 2.31

- Update to 2.30

- Update to 2.29.1

- Update to 2.29

- Update to 2.28

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

- Update to 2.27

- Update to 2.26.1

- Update to 2.26

- Update to 2.25.1

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

- Update to 2.25

Nuke some @dirrm from devel

- Convert USE_BZIP2 to USES

- Update from 2.23.2 to 2.24

- Change maintainer email to @FreeBSD.org
- Convert USE_GMAKE to USES
- Disable NLS to avoid conflicts with devel/binutils
- Add staging support

Approved by:	wg (mentor)

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 1)

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Add WWW link

PR:		ports/179463
Submitted by:	Danilo Egea Gondolfo <danilogondolfo@gmail.com> (maintainer)

- Disable -Werror for now to fix clang building.
  Discussed with maintainer a more proper solution and
  to contact upstream. This at least allows clang to
  build for now.

PR:		ports/179041
Submitted by:	Danilo Egea Gondolfo <danilogondolfo@gmail.com> (maintainer)

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- Update to 2.23.2

PR:		ports/177421
Submitted by:	Danilo Egea Gondolfo <danilogondolfo@gmail.com> (maintainer)

- Update to 2.23.1
- Pass maintainership to submitter

PR:		ports/176594
Submitted by:	Danilo Egea <danilogondolfo@gmail.com>

Update to version 2.17

PR:             ports/153612
Submitted by:   Pedro Giffuni <giffunip@tutopia.com>

Maintainer has asked that this one be reassigned to the pool (private
email).

-remove MD5

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Try to clean up some leftover locale directories we may have created

Approved by:    portmgr (implicit)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

SHA256ify

Approved by:    krion@

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Pass maintainership to jflemer@alum.rpi.edu

Approved by:    Espen Skoglund <esk@ira.uka.de> (old maintainer)

- Fix plist
- Save arm-elf-gcc295 from being deprecated

PR:             ports/84347
Submitted by:   James E. Flemer <jflemer@alum.rpi.edu>
Approved by:    Espen Skoglund <esk@ira.uka.de> (maintainer)
Approved by:    portmgr (erwin, clement)

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

SIZEify (maintainer timeout)

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Update to version 2.14.

De-pkg-comment.

* Finish upgrade to 2.12.1.
* Sort plist.
* Use PKGNAMEPREFIX instead of hardcoded arm-elf.

PR:             41230
Submitted by:   Espen Skoglund <esk@ira.uka.de>

BROKEN: distinfo update was not committed with last Makefile update

Upgrade to Binutils 2.12.1.

Upgrade to Binutils 2.12.0.

USE_LIBTOOL implies GNU_CONFIGURE, so remove the latter where appropriate.    

Update to 2.11.2.    

Update to Binutils 2.11[.0].    

GNU binutils for vanilla ARM cross-development